655510F
CFL510F |
Hand-Held Domain Reflectometer
BIDDLE CFL510F TDR
Six ranges for testing power, cellular, CATV, and telephone cables
Large high resolution backlit LCD
25 W, 50 W, 75 W, and 100 W output impedance
Gain, balance, and contrast controls front-panel accessible
Autoranges around the cursor for best view of fault
The Biddle CFL510F is an advanced instrument capable of identifying a wide
range of cable faults using Time Domain Reflectometry. It offers
exceptional features and a range capability normally associated with
larger, more expensive instruments. The measurement range spans from 30
feet to 9,000 feet, with a minimum resolution of four inches.
|
$1,475.00
|
655535F
CFL535F |
BIDDLE CFL535E TDR
Cable Fault Locator
Dual input and output ports
15 internal memory positions
RS-232 interface to a PC or printer (included software)
Help menu
5 user selectable pulse widths per range
Trace averaging
The Biddle Model CFL535E is an advanced instrument capable of identifying
a wide range of cable faults using Time Domain Reflectometry. Narrow
pulses of electrical energy are transmitted along the cable. The pulse
travels through the cable at a velocity determined by the cable
insulation. Changes in characteristic impedance of the cable will cause
the pulse to be reflected which then is displayed on the instrument
|
$2,795.00
|
CHM Series |
CHM Series Cable Height Meter
CHM2000 Telecom, 35 ft height, Cat-CMM2000
CHM600 Power, 50 ft height, Cat-CMM600
CHM600E Power, 75 ft height, Cat-CMM600E
|
Starts
At $435.00 |
INTERR-10T1
Discontinued! |
• Complete in-service or
out-of-service testing
• End-to-end T1 span testing with the most common industry
standard loop codes
• Model 20T1 performs BERT on one of 17 standard stress patterns and two
user-definable 32-bit patterns
• Determines T1 framing and BERT patterns
• Model 20T1 transmits standard, HDSL and Smart Repeater T1 loop codes
• Intuitive, user-friendly interface
• Portable for outside plant applications
|
$1995.00 |
Megger
BERT 20E1 Network Tester |
|
$2,795.00
|
MLS635
|
MLS635 Visible Light Source
Can be used to visually test optical fiber cables, splices
and connectors
|
$650.00
|
MLS1000 |
Multi Mode Light Source
Can be used in conjunction with an optical power meter
for optical loss testing of fiber optic cables
|
$690.00 |
MLS2000
|
MLS2000 Single Mode
Stabilized Laser Source
Can be used in conjunction with an optical
power meter for optical loss testing of fiber optic cables
|
$1,600.00 |
Multimode
Power Meter; 850, 1300 & 1550nm Germanium Detector; connectors are
optional
MPM1000 |
MPM1000 Multi Mode Power
Meter
Advanced optical power meters that can be used for optical
loss testing of fiber optic cables
|
$450.00 |
 MPM2000
|
MPM2000/H Single Mode Power
Meters |
$960.00 |
Model 531
Cat-655531
|
Model 531
Coaxial TDR Coaxial Time Domain Reflectometer
|
$3195.00
|
General
Purpose TDR; 9 Ranges (0-150 ft. to 0-48,000 ft.)-
655535F
|
|
$2,795.00
|
General
Purpose TDR; 9 Ranges (0-150 ft. to 0-48,000 ft.)-
655535F
|
| Hand-Held
Digital TDR- ( TDR900 ) |
| Megger TDR900Hand-held
Time Domain Reflectometer/Cable Length Meter• Full
autoranging ... |
|
|
$350.00
|
Hand-Held
TDR; 100, 300, 1000, 3000, 9500 ft. Ranges; Small Screen
TDR500
|
|
$585.00
|
Hand-Held
TDR; 30, 100, 300, 1000, 3000, 9500 ft. Ranges
655510F
|
|
$1,475.00
|