T600 Moisture Meter
|
|||
| Model: T600 $825.00 |
Model:
T650 $250.00 |
||
|
Hand
Held Subsurface Moisture Meters
For
builders, flooring installers, painters, plumbers,
building and home inspectors or anyone who wants a non-destructive moisture measurement of building materials. 
T600
Moisture Meter
This new digital moisture meter measures the material’s surface moisture values with permanent real time display and does it without damaging the surface of the material. Measures to a depth up to 30 cm (113/4"). Meaningful results of surface and depth multi- dimensional moisture distribution are achieved by using both the T600 and T650 over a grid pattern. #T600 Moisture Meter $82500 FOB CA
These
instruments can also display minimum, maximum and “hold”
values. An individual limit can also be defined.
Large
wall or floor areas can be measured quickly and efficiently by means
of the alarm function. The user can concentrate on the target
without monitoring the measured values on the display all the time.
If the selected limit is exceeded, The T600 or T650 will alert the
user with an audible alarm.
Advantages
of the Alarm Function
on the T600 and T650 
|
|||
T2000E Multifunctioning Measuring Instrument |
|||||||||||||||
| Model: T2000E $335.00 |
Model:
T2000S $490.00 |
||||||||||||||
|
T2000E
& T2000S Multifunctional Measuring Instruments
The digital technology avoids the drifting that occurs with analog devices! 
The
T2000 automatically detects which sensor is attached when the SDI
sensors are changed.
Minimum, maximum, average and hold values
Calibration Settings
Thumbwheel enables simple one-handed operation
Rugged, compact housing
Attractive price/performance ratio
Large back-lit displayInstrument users include:
Installers of sanitary systems
Installers of heating systems
Flooring professionals
Housing Administrators
General and restoration contractors
Mold remediation specialists
T2000
& T2000S Multifunctional Measuring Instruments
 reliability
flexibility
security
of investment
A
“real” multifunctional measuring instrument for material and
building diagnosis:
Digital
precision . . .
The heart of the T2000 is a 24-bit analog/digital converter which supplies long-term stable, precision results which analog instruments cannot achieve even in a rough environment. The digital technology of the “Serial-Digital-Interface” (SDI) opens up a new dimension in flexibility in measuring ability for the user. Start with a T2000 with one probe and purchase other sensors as needed. With the T2000 you have one single measuring instrument for many tasks instead of many instruments for one task!
For
the moisture measurement in buildings the T2000 offers 3 different
methods —
1.) Hygrometric method: Measuring the relative humidity in construction materials by using the climate sensors TS200 SDI with 12 mm diameter or TS240 SDI with 4 mm diameter only (especialy for measurement in holes drilled into joints). 2.) Capacitive and microwave method for raster scanning: Non-destructive measuring of moisture distributions up to 4 cm away from the surface by using the TS300 SDI probe and measuring moisture distributions up to 20 - 30 cm away from the surface using the TS350 SDI probe. 3.) Resistance method: Measuring the electrical resistance between two electrodes inserted into the material (construction material or wood) using electrode probes (only available for the T2000S model). For Temperature measurements such as surface, insertion and immersion: Both T2000 models accept Trotec PT100 sensors as well as non-Trotec sensors and thermocouples with an adapter cable. For Airflow speed and Temperature measurements, SDI anemometer sensors are available.
The
T2000E and T2000S are fitted with a 5 pin plug connector
to which
you can attach Trotec SDI and Pt100 sensors and is also
compatible
with non-Trotec sensors*.
Use the 5pm plug connector (A)for:
Trotec
SDI sensors with TC30 SDI connecting cable
Trotec Pt100 sensors (5-pin plug connector usually integrated)
Non-Trotec sensors* with TC10 adapter cableThe
T2000S also has a BNC input which supports the connection of
electrodes
for building and wood moisture measurement according
to
the resistance principle (Ohm’s Law). 
|
|||||||||||||||
Sensors and Adaptors
| Model | Product Image | Product Name | Price |
| TC10 |  |
Adapter Cable for Non-TS Sensors | $45.00 |
| TC20 |  |
Connecting Cable BNC | $45.00 |
| TC30 |  |
Connecting Cable SDI Sensors | $45.00 |
| Choose from list |  |
Electrodes for T2000S | $43.00 ... more info |
| Electrodes for the T200S Electrodes for the T2000S Electrodes for measuring moisture content of wood and buildings according to the resistance... | |||
| Choose from list |  |
Pt100 Sensors for Temperature/ Measurement | $5.00 |
| Trotec Pt100 Sensors for Temperature-Measurement Models T2000E & T2000S With the Pt100 sensors, minimum, maximum, average and “hold” values can... | |||
| Choose from list |  |
SDI Sensors Request | $38.00 |
| Trotec Air temperature and air velocity TS 200 / 220 / 240 SDI –climate sensors For measuring air temperature and humidity. Relative... | |||
