AMETEK EPM SERIES - PRESSURE MEASUREMENT SYSTEMS
Complete solutions for testing and measurement of pressure
 


EPM - Easy Pressure Measurement

Based on many years of experience, AMETEK has composed a number of complete solutions for pressure and temperature measurement. These complete kits are delivered in a practical, lightweight carrying case, which is very easy to carry around to the various measuring sites. The configuration eliminates the chance of forgetting probes, tubes, connectors, contact paste, the operating manual or other accessories.
 
 
 

 
 
 

     
     


AMETEK EPM SERIES

  • Complete solutions (minimize the risk of errors)
  • Ecomomical pressure test/calibration tool
  • Rugged design including a protective rubber boot
  • Built-in AMETEK quality and features such as efficiency, technical support, and service
  • Big clear display
  • Time saving features: leak rate, freeze display, zero-display, multiple enginering units
 
 
 
PRESSURE MEASUREMENT
The EPM-2000 series (Easy Pressure Measurement) covers 3 different ranges. Each system is delivered complete with a small, handy test pump. This allows the EPM-2000 to be used for measurement as well as for simple test calibration tasks. Among the many common functions for the 3 models are; minimum and maximum readout of measured values, zero setting, a backlit display, and 11 selectable pressure units. It is also possible to select display resolution. The units feature an average function, which will moderate readout speed when measuring variable pressures. All systems are temperature compensated and are capable of measuring pressure, vacuum, and differential pressure.
 

     
     

 

TRACEABLE CERTIFICATE

All systems can be delivered with a treaceable
calibration certificate. The calibration may
comprise the whole system or simply
individual probes for your most critical
measurement range

     
     

  EMP SYSTEM CONFIGURATION
These are complete systems for the following pressure ranges: ±130 mbar / 1.89 psi, 7 bar / 101.5 psi pressure or 2 bar / 29.0 psi absolute (barometer). The systems are delivered ready for use in a practical carrying case including an air pump with built-in fine adjustment of the pressure, T-piece fitting, hoses, and a connection fitting for the process. In addition sealing tape, batteries, protective rubber boot, and instructions are also included.

 
 
 

 
PRODUCT INFORMATION (Specification sheets)
You need the 'Acrobat Reader' to read PDF documents. Use this link to download the Adobe Acrobat Reader .
 

     
     
Specification sheet in US-English
  AMETEK EPM-2000 Series - - - - Digital indicator - - - - Specification sheet in English
Publication: SS-CP-2178-US Size: 147 Kb, 2 pages
     
     
Specification sheet på dansk
  AMETEK EPM-2000 Serien - - - - Digital indikator - - - - Specification sheet på dansk
Puplikation: SS-CP-2178-DK Størrelse: 101 Kb, 2 sider
 
 
 

     
     

  User Manual JOFRA EPM-2000 Systems
Publication: 105806 01, size: 2.917 Kb
 
 
 

 

Phone: 813-971-5001
Fax : 813-971-5117

Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Toll Free
1-800-783-6664

email sales@omnicontrols.com
Sales@Omnicontrols.com

We guarantee a 24 hour response on all inquiries made via email.
For quicker response please call Omni Controls
at any of the above numbers

 


Please Note: All prices subject to change without notice
copyright©omnicontrols.com - All Rights Reserved.
Terms and Conditions for Omni Controls Inc - online.
Legal Disclaimer
Supplementary Information and Cover Art Copyright omnicontrols.com. All rights reserved.

copyright © omnicontrols 2005
Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Email: sales@omnicontrols.com

Phone: 800-783-6664
Fax: 813-971-5117