| AMETEK ETM
SERIES HANDHELD THERMOMETERS |
| Complete
systems - build for your application |
| |
|
 |
| |
|
|
| |
|
|
E asy
T emperature
M easurement
The ETM-2000 series consists of 5 different
systems and covers a broad variety of temperature
applications. The series has 3 systems for thermocouples
and 2 for Pt100 sensors. Both Pt100 models have IP67
(water proof) density, which make them well-suited for use
in dairy wet rooms, slaughterhouses, and similar food
environments. 3 of the 5 systems have a 'SpeedRead'
function, which calculates the temperature after just 14
seconds in the medium, a great timesaving feature when
measuring granulates, powders, and atmospheres. Data
logging is an option in the Pt100 system as well as in the
thermo element system. Results are shown on the display or
on a PC. |
|
|
|
|
|
| |
| |
- Complete solutions (minimize the risk of errors)
- Flexible solutions (may be supplemented as needs
change)
- The instrument is 'industry protected' (IP65 and
IP67) with a rubber boot
- Systems dedicated for the food industry, HVAC, or
general industry
- Systems available with or without data logging
and software for documentation of critical
measurements
|
| |
|
| |
|
|
| |
|
|
|
|
All systems can be delivered with a traceable
calibration certificate. The calibration
may comprise the whole system or
simply individual probes for your most
critical measurement range. |
|
|
|
| |
|
|
| |
|
Datalogging |
Clik to enlarge
|
|
The
models with data logging have an infrared
interface on the back. With the EasyLink
interface, all data may be sent to a computer.
The EasyLink software can show certain
data graphically, analyze data, or export data
to spread sheets, databases, or directly into
reports. There is no need for manual typing
of measurement results. |
|
|
|
| |
| ETM systems
1 & 2 - General industry |
| These
are thermocouple systems with or without data logging.
They are supplied with 4 different probes designed for
surface, penetration, atmospheric measurements, and a
flexible wire cable probe. The systems also contain
contact paste, instructions, batteries, protective rubber
boot and space for the EasyLink package containing
infrared interface and software. The kit is supplied in a
practical carrying case. These systems can be used
throughout the process for control and logging of
temperature data. |
| |
|
| |
| ETM system
2 & 3 - Food industry |
| These
systems are primarily for control of refrigeration and
freeze compartments, pasteurization, ovens, sterilization
units, and similar applications. The systems employ Pt100
probes for optimum accuracy and are available with or
without data logging. Both systems feature IP67 density
for resistance in wet environments. The temperature range
is from –50 to 250°C / -58 to 482°F. (The indicator,
however, is able to measure from –150 to 800°C / -238
to 1472°F). Each system contains 3 different probes: a
penetration probe with needle tip, a general-purpose
probe, and an atmospheric probe. The systems are delivered
in a practical carrying case with instructions, batteries,
protective rubber boot, and space for the EasyLink
package. |
| |
|
| |
| ETM system
5 - Heating and ventilation (HVAC) |
| This
is a thermo couple system for use up to 1200°C / 2192°F.
The system contains 4 probes: a general-purpose probe, a
penetration probe for flue gas, a thin surface probe, and
a flexible wire cable probe. The system is delivered in a
practical carrying case with contact paste, instructions,
batteries, and protective rubber boot. |
| |
|
| |
| PRODUCT
INFORMATION (Specification sheets) |
| You
need the 'Acrobat Reader' to read PDF documents. Use
this link to download the Adobe Acrobat
Reader . |
| |
|
|
|
|
|
