JOFRA MULTI LOOP SIGNAL CALIBRATOR -- OBSOLETE --
 
 
 

 
 
 

     

   

- OBSOLETE - as per January 1. 2004

New enhanced product in place; see JOFRA ASC300
   

     

   

The JOFRA MLC multi loop calibrator offers a wide choice of measuring, simulation and calibration combinations including autostepping, ramping, transmitter calibration, scaling, selectable standards, cold junction compensation, loop testing and more. 



The MLC enable you measure and simulate mA, V, mV, Ohm, loop supply, transmitters, thermocouples and RTD's. A built-in Pt100 Class A sensor ensures accurate cold junction compensation when using thermocouples. Thermocouple and RTD simulations may be performed while both mA input and transmitter power supply remain available for connection. This pocket-size calibrator can also provide 24 VDC power for 4-20 mA and 0-20 mA transmitters.

  mlc-S-B.jpg(14210Bytes)
Click to enlarge

     
Complete loop calibration    
In order to maintain consistent quality of manufactured products, it is necessary to perform periodic calibrations on process sensors and instruments. There are several philosophies for calibration of the measurement and control circuits. The most obvious and representative method is to calibrate the complete measurement circuit - i.e. from the sensor through the transmitter to the indicator or controller.   Billede-8.jpg(7590Bytes)

     
Split loop calibration
   
Each component of the process measurement and control loop is calibrated as an independent item.
The transmitter can be calibrated using a precision signal calibrator (JOFRA MLC or MODCAL ll). The indicator or controller can be calibrated either as described for the transmitter or by using the MACAL loop calibrator which simulates an output of 4-20 mA proportional to the temperature (or pressure). The sensor part can be brought to the workshop for a timesaving automatic calibration.

  macal_split_loop.gif(3366Bytes)

 
 
 

 
PRODUCT INFORMATION (Specification sheets)
You need the 'Acrobat Reader' to read PDF documents. Use this link to download the Adobe Acrobat Reader .
 

     
     
Specification sheet in US-English
  JOFRA MLC - - - - Multi signal calibrator - - - - Specification sheet in English
Publication: SS-CP-2310-US Size: 69 Kb, 4 pages
 
 
 

 

Phone: 813-971-5001
Fax : 813-971-5117

Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Toll Free
1-800-783-6664

email sales@omnicontrols.com
Sales@Omnicontrols.com

We guarantee a 24 hour response on all inquiries made via email.
For quicker response please call Omni Controls
at any of the above numbers

 


Please Note: All prices subject to change without notice
copyright©omnicontrols.com - All Rights Reserved.
Terms and Conditions for Omni Controls Inc - online.
Legal Disclaimer
Supplementary Information and Cover Art Copyright omnicontrols.com. All rights reserved.

copyright © omnicontrols 2005
Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Email: sales@omnicontrols.com

Phone: 800-783-6664
Fax: 813-971-5117