• Shopping Cart:
  • 0 Items In Cart
  • Total: $0.00
call today

TOLL FREE 1.800.783.6664

Voice: 813.971.5001 Fax : 813.971.5117

sales@omnicontrols.com

 


Documenting Multifunction Calibrator

 




Price starts at $9,950.00

Product Code : DPI620GFF

Manufacturer : Druck

Add To Cart Email Friend Add To Saved Cart
Untitled 1

Product Highlights
- Genii Advanced Modular Calibrator and HART Communicator:
NEW! Smart Phone Technology Touch Display and new UI (User Interface) Supporting Gestures And Swipes
NEW! Completely New Digital Platform and Modems to Support HART and Fieldbus Applications
NEW! DASHBOARD to Quickly Launch Applications such as CALIBRATOR, HART and SETUP with New Applications, Including Scope for Real Time Signal Diagnostics
NEW! TASK Menu Allows Single Touch Configuration for common Devices, User Configured Tasks can be Added to the Library
Full Capabilities of a Stand Alone Communicator
Free Upgrades Via the Internet: Upgrade your DD Library - No Special Software Required, No Additional Cost
Powerful Device Configuration, Commissioning and Maintenance Capabilities
Complete Library of all Registered HART Device Descriptions
24 Volt Loop Power Supply
12 Hour Life Lithium Polymer Battery Pack
Measure, Source and Simulate Multiple Parameters
Can Display up to 6 Active Readings
USB Master and Slave for Connecting to a PC and Peripherals
Measure, Source and Simulate mA, mV, V, Ohms, Frequency, RTDs and Thermocouples
All First Generation DPI 620 and the New Genii System Components are Fully Interchangeable; e.g. Pressure Stations, Pressure Modules and all Accessories
- Genii Pressure Module:
2 independent pressure channels
Simple to re-range
Pressure protection
The MC 620/G module carrier attaches the head of the DPI 620/G to provide two independent pressure measurement channels
- Skeletool CX with Stainless Finish w/ DLC, No Sheath, Gift Tin:
154CM Stainless Steel Clip Point Knife
Needlenose Pliers
Regular Pliers
Wire Cutters
Hard-wire Cutters
Large Bit Driver
Bottle Opener
Carabiner Clip
INCLUDED BITS: Phillips #1 and #2 Bit, Screwdriver 3/16" and 1/4" Bit
- Coverall Calibration Labels, 1 3/4 X 5/8", Green (Pk/128)

--------------------------------------------------------------------------------




Each Unit Includes...
Genii Advanced Module
Genii Pressure Module Carrier
Skeletool CX with Stainless Finish w/ DLC, No Sheath, Gift Tin
Coverall Calibration Labels, 1 3/4 X 5/8", Green (Pk/128)

--------------------------------------------------------------------------------




This ultra-compact electrical, frequency and temperature calibrator and HART communicator provides simultaneous measurement and source capabilities for the setup, testing and calibration of most types of process instruments including transmitters, transducers, gauges/indicators, switches, proximity detectors, counters, RTDs, thermocouples and valve positioners.

What’s new in Genii compared to the old DPI 620?
Smart phone technology touch display and new UI (User Interface) supporting gestures and swipes for a flatter menu structure and greater ease of use.
Completely new digital platform and modems to support HART and Fieldbus applications.
New DASHBOARD to quickly launch applications such as CALIBRATOR, HART and SETUP with new applications, including SCOPE for real time signal diagnostics.
TASK menu allows single touch configuration for common devices such as pressure and temperature transmitters, transducers, switches, and valve positioners. User configured tasks can be added to the library.
All first generation DPI 620 and the new Genii system components are fully interchangeable; e.g. pressure stations, pressure modules and all accessories.
Standard Dashboard Applications:
Calibrator
One touch selection of common tasks, e.g. P to I for a pressure transmitter
Highest accuracy for measuring, sourcing and simulating electrical, frequency, temperature and pressure
Simulate device inputs and measure outputs simultaneously (up to 6 active channels)
Calculates errors between inputs/outputs
Pressure system generates 100 bar/1,500 psi pneumatic and 1000 bar/15,000 psi hydraulic pressures.
Interchangeable pressure modules from 25 mbar/1 inH2O to 1,000 bar/15,000 psi
Meter
Easy to use Multi-meter
Take measurements, test power supplies, check continuity
Scope
Real time graphical analysis of pressure and electrical signals
Advanced diagnostics and fault finding
HART Communicator
View, change, clone and store device configurations
Work off-line to create and change configurations
Transfer device configurations to your PC
Measure and source analogue variables without secondary calibration equipment
No power during shutdown? Genii provides 24 V.
Need a 230 ohm resistor? Just select from the menu.
It's easy to upgrade Genii with free of charge software and latest DD library.
DPI 620 Genii General Specifications
Display Size: 110 mm (4.3 in) diagonal; 480 x 800 pixelsLCD: Colour display with touch-screen
Languages English (Default), Chinese, French, German, Italian, Portuguese, Russian, Spanish, Dutch, Japanese
Operating temperature -10° to 50°C (14° to 122°F)
Storage temperature -20° to 70°C (-4° to 158°F)
Ingress Protection IP54 (Dust-tight, jets of water)
Humidity 0 to 90% RH Non condensing
Shock / Vibration BS EN 61010:2001; Def Stan 66-31, 8.4 cat III, 1 m Drop Tested
EMC Electromagnetic compatibility: BS EN 61326-1:2006
Electrical safety Electrical – BS EN 61010 : 2001
Pressure safety Pressure Equipment Directive - Class: Sound Engineering Practice (SEP)
Approved CE Marked
Size (L: W: H) DPI 620 Genii only: 183 x114 x 42 mm (7.2 x 4.5 x 1.7 in) + MC 620/G: ≈ 265 x 114 x 64 mm ( 10.4 x 4.5 x 2.5 in) + PM 620: ≈ 265 x 114 x 93 mm (10.4 x 4.5 x 3.7 in)
Weight DPI 620 Genii only: ≈ 575 g (1.3 lb) – battery included. MC 620G only: ≈ 640 g (1.4 lb). PM 620 only: ≈ 100 g (0.2 lb).
Power supply Lithium-Polymer battery (GE Part number : IO620-Battery); Capacity: 5040 mAh (minimum), 5280 mAh (typical); Nominal voltage: 3.7 V. Charge temperature: 0° to 40°C (32° to 104°F) Discharge temperature: -20° to 60°C (-4° to 140°F).Note: For best battery performance, keep the temperature less than 60°C (140°F). Charge/discharge cycles: > 500 > 70% capacity.
Duration Measure functions (CH1): ≈ 12 hours continuous. Dual Function, mA measure (CH2): ≈ 7 hours (24 V Source at 12 mA)
Connectivity USB Type A, USB Type Mini B, WiFi IEEE 802.11g, Bluetooth


Quick Start Guide

script async src="http://tp.multiview.com/dpx.js?cid=10024&action=100&segment=omnicontrols&m=1">