• Shopping Cart:
  • 0 Items In Cart
  • Total: $0.00
call today

TOLL FREE 1.800.783.6664

Voice: 813.971.5001 Fax : 813.971.5117

sales@omnicontrols.com

 


1" Inline Low Flow Meter

 




Price starts at $319.00

Product Code : BT0100

Manufacturer : Global Water

Models Available:

Add To Cart Email Friend Add To Saved Cart
SPX INLINE LOW FLOW METERS
Chemical resistant low flow meters for small diameter pipes
FEATURES:
  • Accurate at lower flow rates
  • Resistant to many low-corrosive chemical solutions
  • Pulse output is compatible with most PLC’s & controllers
  • Transparent housing for sight flow inspection
  • Replaceable non-wetted solid-state pickup

On this page:

 

Inline Low Flow Meters Product Description
Inline Low Flow Meters Specifications
Downloads (PDF):

 

Inline Low Flow Meters Brochure
Inline Low Flow Meters Manual*
Inline Low Flow Meters Blind 4-20mA Converter Manual*
Inline Low Flow Meters Battery Powered Pulse and Display Manual*
Inline Low Flow Meters Pulse and 4-20mA Display Manual*
Additional Information:

 

Product Support
Pipe Layout Recommendations
FT420 High Turbulence Compensation
Programable Logic Controllers Connection Help

 

Inline Low Flow Meters Product Description

The SPX Inline Low Flow Meters employ ruby bearings and nickel tungsten carbide shafts to allow the low flow meters to measure very low minimum flows and provide superior wear characteristics.  The SPX Inline Low Flow Meters' polypropylene body is resistant to many mild chemicals and are available in standard pipe thread sizes from 3/8" to 1" NPT.  A transparent acrylic cover provides visual flow indication for the PVDF rotor element of the chemical resistant low flow meters.  The 6-24 VDC pulse output of the SPX Inline Low Flow Meters is compatible with many different types of PLCs, counters, and a full range of rate displays and controls.

Application Note: Straight pipe run of at least 5 diameters (10 diameters is preferred) upstream of the inline low flow meter is recommended.  Vertical and horizontal installations are all acceptable for the inline low flow meter.

 

Are the SPX Inline Low Flow Meters compatible with (acid, caustic, ethylene glycol, etc.)?
The main material of the chemical resistant low flow meters is polypropylene, the standard lens is acrylic.  These are both good general chemically-resistant materials, but they can't handle many of the stronger chemicals.  The Inline Low Flow Meters' rotor is PVDF, the shaft is a nickel-bonded tungsten carbide, similar to a stainless steel in resistance.  If the wetted materials used on the Inline Low Flow Meters are questionable, please call for a consultation with our application specialists.

Inline Low Flow Meters Specifications

Accuracy: ±1% full scale
Flow Rates
     3/8": 0.07 - 5 GPM
     1/2": 0.1 - 10 GPM
     3/4": 0.2 - 20 GPM
     1":    0.5 - 40 GPM
Materials
     Body: Polypropylene
     Cover: Acrylic
     Rotor: PVDF
     Shaft: Nickel tungsten carbide
     Bearings: Ruby
Max. pressure: 150 psi (10 bar)
Max. temp: 160°F (70° C)
Power: 6-24 VDC, 2 mA minimum
Sensor cable: 18' AWG 22 3-conductor
Max. cable run: 2000 ft (650 m)
Weight: 2.5Lbs (1.13Kg)
Size: 4.1x2.2x2.1 inch (10.5 x 5.5 x 5 cm) (LxWxH)

script async src="http://tp.multiview.com/dpx.js?cid=10024&action=100&segment=omnicontrols&m=1">