• Shopping Cart:
  • 0
  • Total: $0.00
call today

TOLL FREE 1.800.783.6664

Voice: 813.971.5001 Fax : 813.971.5117



600A Clamp-On Multimeter TRMS


Price starts at $119.95

Product Code : ACD-10 TRMS-PLUS

Manufacturer : Fluke

Add To Cart Email Friend Add To Saved Cart
Amprobe’s ACD-10 TRMS-PLUS meter offer thinner jaws over standard clamp meters. Allowing access to tight measurement areas and still accommodating conductors up to 25 mm. Both meters also measure Capacitance and Frequency. Frequency is measured by either jaws or test leads. Very versatile clamp multimeters. True RMS version for noisy measurement environments for a more accurate reading.

  • AC & DC Voltage to 600V
  • AC Current to 600A
  • Thin Jaws, only 10mm (0.4”) thick
  • Resistance to 40MΩ
  • Continuity Buzzer
  • Capacitance to 3000 uF
  • Frequency measurement
  • In rush current
  • Hold & Maximum reading functions
  • Accommodates conductors up to 26mm (1.02”) in diameter
  • Auto ranging
  • Auto power off
  • Rubber over-molded case
  • Overload protected
  • TRMS Measurement
  • Included Accessories:Test leads, battery installed, soft carrying pouch, and users manual
  F E A T U R E S
Size:      190 x 63 x 32 mm (7.4 x 2.5 x 1.3 in)
Weight:      139 gm approx
Safety:      Meets EN61010-2-032, UL61010B-2-032, IEC61010-1 2nd Ed., EN61010-1 2nd Ed., UL61010-1 2nd Ed. CAT III-600 Volts ac & dc; Pollution degree : 2
Instruction Manual:      Yes
Detailed Specs:      Yes
Hi-Resolution Image:      Yes

  S P E C I F I C A T I O N S

Display:     3-3/4 digits 4000 counts LCD display
Update Rate:     3 per second nominal
Polarity:     Automatic
Operating Temperature:     °C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C
Altitude:     Operating below 2000m; Indoor use
Storage Temperature:     -20 °C to 60 °C, < 80% RH (with battery removed)
Temperature Coefficient:     nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C)
Low Battery:     Below approx. 2.4V
Power Supply:     3V coin battery IEC-CR2032
Power Consumption:     2.8 mA typical except that 3.3 mA typical for ACA function
APO Timing:     Idle for 30 minutes
APO Consumption:     5 μA typical
Jaw opening & Conductor diameter:     max 26 mm
Special Features:     30ms Max Hold; Data Hold; Relative Zero mode

  R E L A T E D    P R O D U C T S

Part Number     Description
ACD-10 PLUS 600A Clamp-On Multimeter
script async src="http://tp.multiview.com/dpx.js?cid=10024&action=100&segment=omnicontrols&m=1">