| GDS-806C Digital Storage Oscilloscope |
60MHz Bandwidth With COLOR Display
125k Memory and 12 Division Horizontal Display
25GS/s Sampling Rate for Repetitive Waveforms
Advanced Trigger : Pulse Width , TV Line, Event Delay and Time Delay
Go/NoGo , Auto Setup Sequence and TTF Function
Built-In Help Menu, Multi-Language and FREE PC Software
Standard Interface: RS-232C
Optional Interface: GPIB, Printer Port and USB 2.0 |
| Specifications |
| Display System |
| Display Device |
Color (320 x 240) |
| Display Contrast |
Adjustable |
| Waveform Display Graticule |
8 x 10 divisions (8 x 12 when menu off) |
| Vertical System |
| Bandwidth |
60MHz |
| Channels |
2 |
| Vertical Resolution |
8-bit |
| Vertical Sensitivity |
2mV/div ~ 5V/div |
| Vertical Accuracy |
±3% |
| Rise Time |
<5.8ns |
| Input Coupling |
AC , DC , Ground |
| Input Impedence |
1M? ± 2% , ~18pF |
| Polarity |
Normal and Invert |
Max. Voltage
|
300V ( DC+AC peak ) , CATII |
| Waveform Signal Process |
CH1 + CH2 , CH1 - CH2 , FFT |
| Offset Range |
2mV/div~50mV/div : ± 0.5V;
100mV/div~500mV/div : 1V/div~5V/div : ±50V |
| BW Limit |
20MHz ( -3dB ) |
| Horizontal System |
| Time Base Range |
1ns/div ~ 10s/div ( 1-2-5 increments ),
Roll : 250ms/div ~ 10s/div |
| Time Base Mode |
Main , Window , Window Zoom , Roll , X-Y |
| Time Base Accuracy |
± 0.01% |
| Delay Range |
Pre-trigger : 20 div |
| Signal Acquisition System |
| Real Time Sample Rate |
100MS/s maximum on each channel |
| Equivalent Sample Rate |
25GS/s E.T. maximum on each channel |
| Record Length |
125h/CH |
| Peak Detection |
10ns (500ns/div ~ 10s/div) |
| Acquisition Mode |
Sample , Peak Detect , Average |
| Average |
2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 |
| Trigger |
| Trigger Source |
CH1 , CH2 , Line , Ext |
| Mode |
Auto Level , Auto , Normal , Single , TV , Time Delay , Event Delay , Edge ,
Pulse Width , AC , DC , HF , LF , Noise Reject |
| Coupling |
AC , DC , HF , LF , Noise Reject |
| Sensitivity |
DC ~ 25MHz : Approximate 0.5div or 5mV
25MHz ~ 60MHz : Approximate 1.5div or 15mV |
| X-Y Mode |
| X-Axis Input/ Y-Axis Input |
Channel 1 / Channel 2 |
| Phase Shift |
± 3° at 100 kHz |
| Cursor and Measurement |
| Auto Voltage Measurement |
Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin |
| Auto Time Measurement |
Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width,
Duty Cycle |
| Cursor Measurement |
Voltage difference between cursors (?V), Time difference between
cursors (?T), Frequency difference between cursors (1/?T) |
| Frequency Counter |
| Readout Resolution |
6 digits |
| Frequency Range |
AC Coupled , 20Hz~rated bandwidth ; resolution: 10Hz |
| Signal Source |
All available trigger source except the Pulse Width & Video Trigger mode |
| Adjustable Probe Calibration Signal |
| Frequency Ring |
1 kHz ~ 100 kHz 1KHz / STEP |
| Duty Cycle |
5% ~ 95% 5% / STEP |
| External Trigger |
| Range |
± 15V |
| Sensitivity |
DC ~ 25MHz : ~ 50mV ; 25 ~ 60MHz : ~ 100mV |
| Input Impedance |
1M?± 2%, ~ 18pF |
| Maximum Input |
300V ( DC + AC peak ) , CATII |
| Control Panel Function |
| AutoSet |
"Autoset" can adjust vertical ( Volt/div ), Horizontal ( Sec/div) and Trigger
level automatically |
| Save/Recall |
Up to 15 sets of measurement conditions can be saved and recalled |
| Wavefirn Trace Save/Recall |
2 sets of waveform can be saved and recalled |
| Interface |
| Standard |
RS-232C |
| Optional Opt. 01 |
GPIB Interface |
| Optional Opt. 11 |
USB, Printer Port, Go/NoGo Output |
| Power Source |
100V ~ 240V AC 47Hz ~ 63Hz , Auto selection |
| Accessories |
Instruction Manual x 1 , Power Cord x 1 , Probe x 2 |
| Dimensions and Weight |
310W x 142H x 254D (mm) , Approximate 4.1 kg |
|