Digital indicator for use with temperature, voltage or current loop inputs
|
|
|
|
Price starts at
$599.00
|
|
Product Code : 610
|
|
Manufacturer : Doric
|
|
|
|
|
| Models: |
|
|
|
| POWER CONFIGURATION: |
|
|
|
| INPUT TYPE: |
|
|
|
| OPTIONS: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Laboratory
Accuracy to 0.01%
- Full 5-digit
(99999 Counts) Resolution
- 14 Plug-in
Options
- Sensitivity
to 1 Microvolt/Count
- Simple,
Front Panel Programming
- Superior
Temperature Measurement
- Process
Voltage and Current Loop
- Strain-Gage
Measurement
- LED
Displayed Engineering Units
- Made in USA
|
Click
for 600 Series Manual
A custom,
DORIC-designed, integrating voltage-to-frequency A/D converter combined
with precision filtering, isolated electronics, and multi-segment
digital linearizations lets the Series 600 accommodate wide measuring
ranges at a very high resolution - high enough to achieve laboratory
accuracy in process and test measurements. The Series 600 offers
repeatability, reliability, and compatibility with most sensors.
Temperature can be
measured from -460 to +4206°F, -273 to 2318°C, or 0 to 2592K, all with
0.1° resolution. DC voltage can be measured to 1µV and ranges are
available up to 100V. Process voltage and current loops can easily be
scaled from the front panel, within 99999 display counts. And,
strain-gage indicators measure load cells, pressure, torque, thrust, and
force with 0.01% precision.
Whether you're
measuring the temperature of molten metal or testing jet engine
performance, make your choice a Series 600 digital indicator.
A Broad
Selection of Options
Series 600
instruments offer unparalleled flexibility, allowing you to configure
them specifically for your application. The series has the industry's
widest selection of options. Specify only those options you need by
adding option cards into the instrument's rear slots.
Convenience
From The Front
Just about
everything can be done from the front panel--even calibration. Simple
display instructions prompt you every step of the way. Change sensor
type selection, change °F or °C, set alarm points, or reset math
options-from the front panel. And when an option is installed, you'll be
prompted appropriately.
Also, all output
options are fully isolated, keeping unwanted ground loops from affecting
the instrument's measuring system. This further maintains the
instrument's high accuracy and increases your confidence in the
displayed value.
Unique Sensor
Error Compensation
Compensate for
sensor offset errors with SensorMatch™ - errors like those that
commonly occur with thermocouples. SensorMatch corrects offset errors
inherent in sensors, leadwires, and deviations from reference operating
conditions. Use it to optimize measuring systems at a single measurement
point such as monitoring a calibration bath.
EMI/RFI Noise
Protection
The Series 600
operates accurately in tough environments where RFI and EMI can cause
problems for other panel indicators. An all-metal case, bezel, and rear
panel isolate the internal electronics from outside interference.
|
Temperature
Measurement
|
The Series 600
measures and displays as few as one input point or, with multi-input
options, as many as twenty-four. Model 610 is a single input instrument
for rack or panel mounting and can accommodate up to two option cards.
Model 612 is an expanded, double-width indicator that accommodates up to
five options. Both are compatible with a wide selection of temperature
sensors.
Sensor
compatibility is easy to specify because only 3 range cards accommodate
all sensor types. The thermocouple range card accommodates the fourteen
types of thermocouples shown in the range table. The RTD range card
accommodates the six types of RTD sensors. The thermistor range card
accommodates both types of thermistors. They offer 0.1° resolution with
thermocouples and RTD sensors and provide 0.01° to 0.02° resolution
for thermistors.
A specific sensor
type (e.g., type J thermocouple) is keypad selectable from the front
panel. The front panel keypad is also used to select °F, °C, or Kelvin
display units.
Order Model
610--1 for thermocouple inputs, 610--5 for RTD inputs, 610--6 for
thermistor inputs (Specify up to two option cards, e.g., 610T--______.)
Order Model
612--X for thermocouple inputs, 612--X for RTD inputs, 612--X for
thermistor inputs (Specify up to five option cards, e.g.,
612--5-___-___-___-___).
NOTE: "
" specifies power: 1 = 115VAC, 2 = 230VAC.
|
RTD
Range Table
|
| Sensor Type |
Order Code |
Range/Display |
Accuracy(±) |
Resolution |
Platinum-100
at 0°C
3 or 4-wire, a=0.00385/
Din 43670 curve |
-5 |
-332°
to +1571°F
-202° to +855°C
70 to 1128 K |
0.2°F
0.1°C
0.1 K |
0.1°F
0.1°C
0.1 K |
Platinum-100
at 0°C
3 or 4-wire
a=0.00392 |
-5 |
-401°
to +1572°F
-240° to +855°C
32 to 1128 K |
0.2°F
0.1°C
0.1 K |
0.1°F
0.1°C
0.1 K |
Platinum-200
at 0°C
3 or 4-wire
a=0.00392 |
-5 |
-330°
to +1566°F
-201° to +852°C
72 to 1125 K |
0.2°F
0.1°C
0.1 K |
0.1°F
0.1°C
0.1 K |
Platinum-1000
at 0°C
3 or 4-wire, a=0.00375/
Hycal, Ultra 7 curve |
-5 |
-330°
to +1025°F
-204° to +1200°C
68 to 1473 K |
0.2°F
0.1°C
0.1 K |
0.1°F
0.1°C
0.1 K |
Copper-10
at 25°C
3 or 4-wire, per
Minco table 16-9 |
-5 |
-337°
to +507°F
-205° to +264°C
68 to 537 K |
0.8°F
0.4°C
0.4 K |
0.1°F
0.1°C
0.1 K |
Nickle-120
at 0°C
3 or 4-wire, per
Minco table 7-120 |
-5 |
-112°
to +608°F
-80° to +320°C
192 to 593 K |
0.4°F
0.2°C
0.2 K |
0.1°F
0.1°C
0.1 K |
Thermocouple
Range Table
|
| Sensor
Type |
|
Order
Code |
Range/Display |
Accuracy(±) |
Resolution |
| Iron-Constantan |
J |
-1 |
-336°
to +2193F
-204° to +1200°C
68 to 1473 K |
0.5°F
0.3°C
0.3 K |
0.1°F
0.1°C
0.1 K |
| Chromel®*-Alumel®* |
K |
-1 |
-299°
to +2503F
-184° to +1373°C
88 to 1646 K |
0.6°F
0.3°C
0.3 K |
0.1°F
0.1°C
0.1 K |
| Copper-Constantan |
T |
-1 |
-373°
to +753°F
-225° to +400°C
56 to 1275 K |
0.4°F
0.3°C
0.3 K |
0.1°F
0.1°C
0.1 K |
| Chromel®*-Constantan |
E |
-1 |
-358°
to +1835°F
-217° to +1001°C
56 to 1275 K |
0.6°F
0.3°C
0.3 K |
0.1°F
0.1°C
0.1 K |
Platinum-Platinum
13%, Rhodium |
R |
-1 |
+32°
to +3219°F
0° to +1770°C
273 to 2043 K |
1.2°F
(above 79.0°F)
0.7°C
(above 26.0°C)
0.7K
(above 299.2 K) |
0.1°F
0.1°C
0.1 K |
Platinum-Platinum
10%, Rhodium |
S |
-1 |
+32°
to +3216°F
0° to +1769°C
273 to 2042 K |
1.2°F
(above 79.0°F)
0.7°C
(above 26.0°C)
0.7K
(above 299.2 K) |
0.1°F
0.1°C
0.1 K |
Platinum
30%,
Rhodium-Platinum
6%, Rhodium |
B |
-1 |
+899°
to +3309°F
+481° to +1820°C
755 to 2094 K |
2.0°F
1.1°C
1.1 K |
0.1°F
0.1°C
0.1 K |
| Nicrosil-Nisil |
N |
-1 |
+32°
to +2301°F
0° to +1260°C
273 to 1543 K |
0.5°F
0.3°C
0.3 K |
0.1°F
0.1°C
0.1 K |
Tungsten
5%,
Rhenium-Tungsten
26%, Rhenium |
C |
-1 |
-10°
to +4200°F
-23° to +2318°C
249 to 2589 K |
1.1°F
0.6°C
0.6 K |
0.1°F
0.1°C
0.1 K |
Tungsten-Tungsten
26%, Rhenium |
G |
-1 |
+295°
to +4206°F
+146° to +2318°C
419 to 2592 K |
1.1°F
0.6°C
0.6 K |
0.1°F
0.1°C
0.1 K |
Tungsten
3%,
Rhenium-Tungsten
25%, Rhenium |
D |
-1 |
-8°
to +4203°F
-22° to +2317°C
250 to 2590 K |
1.1°F
0.6°C
0.6 K |
0.1°F
0.1°C
0.1 K |
Chromel®*-Gold
.07%, Atomic Iron |
CGI |
-1 |
-460°
to +44°F
-273° to +7°C
0 to 280 K |
0.4°F
0.2°C
0.2 K |
0.1°F
0.1°C
0.1 K |
Iron
Constantan
DIN |
FeCon |
-1 |
-330°
to +1654°F
-201° to +901°C
71 to 1174 K |
0.9°F
0.2°C
0.5 K |
0.1°F
0.1°C
0.1 K |
Copper-Constantan
DIN |
CuCon |
-1 |
-331°
to +1114°F
-201° to +601°C
71° to 874 K |
0.9°F
0.5°C
0.5 K |
0.1F
0.1°C
0.1 K |
| *CHROMEL®
and ALUMEL® are registered trademarks of the Hoskins
Manufacturing Company. |
Thermistor
Range Table
|
| Sensor
Type |
Order
Code |
Range/Display |
Accuracy
() |
Resolution |
Thermistor
Series
YSI 400, 225
@25°C
2-wire |
-6 |
-42°
to +221°F
-41° to +105°C
231 to 458 K |
0.4°F
0.2°C
0.2 K |
0.02°F
0.01°C
0.01 K |
Thermistor
Series
YSI 700
3-wire |
-6 |
+31°
to +213°F
0° to +100°C
272 to 373 K |
0.4°F
0.2°C
0.2 K |
0.01°F
0.01°F
0.01 K |
|
DC and Scaled DC
Measurement and Display
|
DC Voltage.
Functioning as a digital voltmeter, the Series 600 provides precision
measurement and display of DC voltages. Four ranges, 100mV, 1V, 10V, and
100V, are standard. Each range is displayed to its highest resolution
within the full 99999 counts of the Series 600 Indicators. With 0.01%
accuracy and 1 digit repeatability, lab quality measurements are
possible with a panel mount indicator.
For applications
demanding more than measurement and display, look to the Series 600
Options. You can enhance the basic VDC measurement with multi-input
switching, scanning, analog or digital outputs, delta inputs or math
expressions - options that meet the most demanding applications.
Order Model
610--2 plus up to 2 options; 612--2 plus up to 5 options.
NOTE: "
" specifies power: 1 = 115VAC, 2 = 230VAC.
Scaled DC
Voltage and Current Loop. The Series 600 can accurately measure and
display commonly found process signals to proportional engineering
units. There are three basic configurations to consider when configuring
for your desired input and scaled display.
First, for current
loop measurements, the standard "current" input card allows
selection of either 4-20mA or 10-50mA as its input. Then, this input is
prescaled and displayed to you as 0.00 to 100.00%.
Second, when you
desire to display something other than 0 to 100%, you can add the
scaling and offset options, 600-01. This option allows you to rescale
the display anywhere within ±99999 counts, change the engineering
units, and/or reposition the decimal point location (e.g., 4-20mA
displayed as 0.00 to 560.0 GPM).
Third, for scaled
DC voltages the same scaling and offset option, -SCL, can be specified
for use with the DC Voltage Input Range Card. Any input with the ranges
shown in the DC Voltage Range Table can be scaled, offset, have
engineering units assigned, and/or have decimal position changed (e.g.,
1-5 VDC input can be displayed as 200.0 to 750.0 PSI).
Order Model
610--4 for current loop inputs as 0-100% and up to 2 options, 612--4-01
for current loop inputs with scaling and up to 5 options, 610--4-01 for
current loop inputs with scaling and up to one other option, 612--4-01
for current loop inputs with scaling and up to four other options,
610--2-01 for VDC inputs with scaling and up to one other option,
612--2-01 for VDC inputs with scaling and up to four other options.
NOTE: "
" specifies power: 1 = 115VAC, 2 = 230VAC.
|
DC
Voltage Range Table
|
| |
Sensor
Type |
Order
Code
|
Range/Display** |
Accuracy(±)* |
Resolution |
| DC
mV |
-2 |
-15.000
to +99.999mV |
.01% |
0.001mV |
| DC
mV |
-2 |
-150.00
to +999.99mV |
.01% |
0.01mV |
| DC
Volts |
-2 |
-1.5000
to +9.9999V |
.01% |
0.0001V |
| DC
Volts |
-2 |
-15.000
to +99.999V |
.01% |
0.001V |
| *
Accuracy percentage is of reading, ±1digit.
* With order code
-2 and Scaling and Offset Option (-01), any input from -15 to +100V can
be scaled to display within
-10000 to ±99999 display counts.
|
Scaled
Range Table
|
| |
Sensor
Type |
Order
Code |
Range/Display** |
Accuracy(±)* |
Resolution |
| .4-20mA |
-4 |
0
to 100% |
.01% |
0.01% |
| 10-50mA |
-4 |
0
to 100% |
.01% |
0.01% |
| *
Accuracy percentage is of reading, ±1digit.
** With order code
-4 and Scaling and Offset Option (-01), input can be scaled to display
within -10000 to ±99999 display counts.
|
|
Digital
Strain-gage Indicators
|
The Series 600 of
Digital Strain-gage Indicators is equally compatible with lower output
bonded foil type transducers as with high output semiconductor
transducers (up to 100mV). Each instrument allows selection from one of
four full-scale voltage ranges to optimize sensitivity.
The measuring
technique used is the unique voltage-to-frequency conversion, dual slope
method with a true, four-wire ratio measurement. This method assures
accurate and stable readings even in noisy environments that can occur
with fluctuating excitation power. Also, it allows for use of indicators
with floating or grounded transducers.
Three alphanumeric
LEDs are supplied either for display of engineering unit tables (e.g.,
PSI, KG, LBS) or as "0" for active display of dead zeros.
Digital scaling is
standard. Drift-free scaling is set to precise engineering units and
decimal location via the instrument's simple, front panel keyboard
entry.
Dual engineering
units (e.g., LBS and KG) are standard. The primary and secondary
engineering unit displays are easily toggled via the front panel. For
example, the primary could be pounds (lbs) while the secondary, a
mathematically proportional kilograms (kg). Because of their math
equivalency, all options function correctly, regardless of display
selection.
System calibration
can be accomplished using a 3-point "live" load, such as
actual weight on a scale, or via electronic instrument calibration using
a DC voltage source.
To reduce settling
indications on the display or option outputs, the display may be rounded
to count by 1, 2, 5, 10, or 100 counts via a simple program menu
selection.
Auto zero (tare)
may be accomplished by the auto zero menu command or while the process
is running. A simple, simultaneous push of the arrow down - (Ø)
and ENT keys rezeros the indicator.
Three Base
Models
There are three
base models of strain-gage indicators from which you can select. The
models vary by their excitation power supply and the availability of
option slots.
The Model 620
is for a user-supplied, external excitation source. It has two available
option slots.
The Model 621
includes a built-in excitation supply capable of driving one or two 350
bridges. Supply voltage is switch selectable for 5, 10, or 15VDC. One
option slot is available.
The Model 622
includes a higher output built-in excitation supply and, because it
comes in a larger double-width chassis, the ability to add up to four
options. This excitation supply provides 5, 10, 15, or 20VDC selection
with the capability to excite up to eight 350
bridges.
Order Models
620G--8 for use with external supply and up to two options, 621G -8 for
built-in supply and one option slot, 622g--8 for built-in supply and
four options slots.
NOTE: "
" specifies power: 1 = 115VAC, 2 = 230VAC.
|
Strain-gage
Range Table
|
| |
Range |
Order
Code |
Accuracy(±)* |
Resolution |
| -15mV
to +100mV |
-8 |
0.01% |
1µV
per count |
| -30mV
to +200mV |
-8 |
0.01% |
1µV
per count |
| -75mV
to +500mV |
-8 |
0.01% |
1µV
per count |
| -1500mV
to +1V |
-8 |
0.01% |
1µV
per count |
| *
Accuracy percentage is of reading, ±1digit. |
|
Series 600 Options
|
Tailor the basic
instruments and your applications with options to extend your
measurement capabilities. A complete explanation, any usage
restrictions, and option ordering codes are included in the following
descriptions. Any option can be ordered now or added in the future so
your Series 600 Indicator will never be obsolete.
Available
options slot summary: 610 Models: 2, 612 Models: 5, 620 Model: 2,
621 Model: 1, 622 Model: 4.
Multiple inputs.
Monitor as many as 24 inputs. The first multiple input card provides an
additional five channels of thermocouple or voltage, or two channels of
RTD, or thermistor inputs. Additional cards add six more thermocouple or
voltage, or three more RTD or thermistor inputs. One card per Model 610
or a maximum of 4 cards per Model 612 instruments. (This feature is not
for use with current loop or strain-gage versions.) Order Option -21
for 6 input of thermocouple or voltage, -21 for 3 inputs of RTD or
thermistor.
Differential
measurement. This card provides an additional input channel and the
capability to display the difference (sT) between the two
channels.
The -22 option
card can be specified with thermocouple and voltage input models. The
-23 option is specifically for use with RTD or thermistor
configurations.
This function can
be combined with other options: maximum, minimum, and average deltas
when used with math capability, scaled analog output of differentials
when used with analog output, and alarm points based on differential
limits (Cannot be used in same indicator with -20 and -21 options. Not
for use with current loop or strain-gage versions.) Order Option -22
for DELTA and 2 thermocouple or voltage inputs, -23 for DELTA and 2 RTD
or thermistor inputs.
Scaling and
offset. Specifically designed for use with voltage and current loop
versions of the 610 and 612, this option provides wide range user
scaling of the display to process units.
With this option
you can rescale and offset inputs for display in direct engineering
units to ±99999 counts. In addition, you can assign alphanumeric labels
or dead zeros to the displayed units.
For example,
4-20mA could be scaled to display "0.00-255.00 PSI",
"LBS", "KG", "GPM", etc. And it's easy.
Unlike with other
instruments, you need not perform any computations or enter any
formulas. Simply enter upper and lower input and output values. The
Series 600 does the rest, adjusting the optimum slope and offset for you
automatically. (This option is not for use with Models 620, 621, or 622
as digital scaling is included as standard.) Order Option -1
Math
expressions. Provides display of maximum, minimum, rate of change,
or the timed average value of measurements. Front panel keys allow you
to view the math value or switch back to view the actual measured value.
Order Option -04
Alarms.
Each option card provides two alarms with separate limits and relays. Up
to two cards can be specified. Any combination of high, low, or ±
values can be used to trigger the alarm from either actual or math
processed input. Trigger delay and a settable dead-band are included as
standard. Order Option -03 (Up to 2 per instrument.)
DC power.
For automotive, marine, aviation, or plant DC power loops, the Series
600 can be configured for 12 or 24VDC power operation. (Cannot be used
in Models 621 or 622.) Order Option -10 for 9-16VDC, -11 for 18-32VDC
(One type per instrument.)
Analog output.
For output to recorders or other analog input instruments, you can
choose from two fully isolated linearized and analog outputs. Both
output types, 4-20mA or 0-10VDC, can be fully scaled. Output can be
assigned to direct measurements or math values. Order Option: -06 for
4-20mA, -05 for 0-10VDC
Scanning Option.
The scanning option gives the capability to scan multiple inputs by
working with the multi-input cards in your indicator. This new option
requires no programming; thus, no special menu prompts are given with
this option installed.
The display
readout shows the value of multi-input card channels at a default rate
of 3.4 seconds a channel. The display rate can be made slower (6.8 sec)
- refer to the configuration instructions to change the rate of display.
It is recommended
that the scanning option not be used with a communications option such
as serial output, etc., since measurement data cannot be identified as
discrete channels. Order Option: -31
|
Digital Outputs
|
Three digital
output modes are available for output to digital equipment.
Serial output.
RS232C or 20mA interface sends display information in serial ASCII
format. Includes user-selectable transmission rates from 300 to 9600
baud, line feed, and carriage return. Order Option -07
IEEE-488 output.
For integrating IEEE-488 Bus based measurement or analytical systems.
Main indicator and other options can be programmed via the IEE-488 Bus. Order
Option -08
Series 600
accessories. The Rack Adapter Plate permits mounting of the Series
600 instruments in a standard 19" (48.2cm) instrument rack.
Different versions have cutouts for 1, 2, or 3 indicators.
Order Accessory
-RKM1 for 1 cutout for Models 610, 620, or 621; -RKM2 for 2 cutouts for
Models 610, 620, or 621; -RKM3 for 3 cutouts for Models 610, 620, or
621; -RKD1 for 1 cutout for Models 612 or 622.
|
Model 600 Series
General Specifications
|
Repeatability
±1 digit
Stability with Ambient Temperature
Zero: 0.5µV/°C
Span: 0.005% rdg/°C
Reference Junction automatic built-in,
0.018°/° for 0°-50°C J, K, T, E, N, C,
G, D, CGI,FeCon, and CuCon thermocouples
For R, S, and B thermocouples: 0.03°/°
Noise Rejection
NMRR:  60dB at 50Hz or 60Hz ±0.1Hz
CMRR: 120dB at 50Hz or 60Hz ±0.1Hz
Overload Protection
Power lead to ground: 1500VDC or VAC RMS
Input to ground: 270VDC or VAC RMS
Across inputs: 270VDC or VAC RMS continuous
4-20mA range: 80mA
10-50mA range: 200mA
Input Impedance
Thermocouples: 22M (with 20nA of break
detect current)
RTDs: I1 to VinLo (10M),
12 to VinLo (12.3K),
depending on range VinHi to VinLo (500M)
Thermistors: I1 to VinHi (3.2K),
I1-12, (9.45K)
Voltage: 10M to 500M depending on range
Current: <15
Strain-gage: 10M to 500M depending on range
Environmental Ranges
Operating: 0° to 50°C
Storage: -40° to +65°C
Humidity:  90%RH noncondensing
Display
8 digits, 14-segment alphanumeric red LEDs
0.54" (13.7mm) H.
Also one negative ("-") LED at left of array
Input Connections
Sensors: screw terminal blocks
Multi-input: quick connect
AC power: plug-in
DC power: screw terminal blocks
Alarms Option
2 alarm settings per alarm option -
up to 2 alarm options per instrument,
Form C relay output (1A at 120VAC) reset
auto, manual, remote, and override selectable
alarm delay and deadband
Multi-input Options -20 and -21 Accuracy
Thermocouple: ±10µV to ±70µV depending on
T/C type and measurement point
RTD:
Cu10: ±10m
All others: ±50m
Current loop and thermistor: no effect
Point Update Rate
2 readings per second,
1 reading/second for R, S, B, C, G, D,
and CGI thermocouples
Linearization, Temperature Inputs
100% digital, using variable length,
second-order, polynomial segments
Program Storage
EEROM
Case Construction
Metal, black anodized, extruded aluminum
Reliability
40,000 hours MTBF
Installation
Panel mounting from front, secured at sides
by rail clamps supplied with each indicator
Size (H x W x D)
Single-wide Models 610, 620, 621
Case: 2.63" x 5.34" x 9.87"
(6.7cm x 13.6cm x 25cm)
Bezel: 2.84" x 5.67" (7.2cm x 14.4cm)
Panel cutout: 2.68" x 5.44" (6.8cm x 13.8cm)
Double wide Models 612, 622
Case: 2.63" x 10.69" x 9.87"
(6.7cm x 27.2cm x 25cm)
Bezel: 2.84" x 11.01" (7.2cm x 28.cm)
Panel cutout: 2.68" x 10.79" (6.8cm x 27.4cm)
Weight
Single-wide: 4 lbs (1800 g)
Double-wide: 6 lbs (2800 g) without options
Power
AC power, 90V to 132V: 48Hz to 400Hz,
190V to 262 V: 48Hz to 400Hz,
8.0W typical (without options)
detachable 6-foot (1.8m) power cord is supplied,
two detachable 6-foot power cords are supplied
with Model 622
Excitation Supply
Model 621: 5, 10, and 15 volts, switch selectable
isolated, will drive two parallel 350
strain-gages at 15V (90mA)
Model 622: 5, 10, 15, and 20 volts, switch selectable,
isolated, will drive eight parallel 350
strain-gages at 15V (350mA)
Warranty
1 Year
|
600 Series
Ordering Guide
|
| Base
Model |
Power
Code |
Range
Codes |
Options
Code |
610
612 |
1=
90-132VAC
2=190-262VAC |
-1
(Thermocouple)
-2 (Voltage)
-4 (Current & Loop)
-5 (RTD)
-6 (Thermistor) |
See
600 Series Options List for individual details and codes. |
620
621
622 |
|
-8 (Strain-gage) |
| Examples: |
610-1-1-03
612-2-5-21-21-06-04
621-18
622-1-8-16-03-03-07 |
|
|
|
|
|
|