150MHz, 2 CH, Visual Persistence DSO
|
|
|
|
Price starts at
$1,836.00
|
|
Product Code : GDS-3152
|
|
Manufacturer : Instek
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
* 350/250/150MHz
with 2/4 Channels
* 5GSa/s RT or 100GSa/s ET Sampling Rate
* Independent Memory for Each Channel
* VPO Technology
* Large 8-inch 800x600 Display
* Split Screen Function
* 3 Built-in Impedances (50Ω/75Ω/1MΩ)
* Power Analysis Software (Optional)
* Serial Bus Analysis Software for I2C, SPI and UART (Optional) |
|
GDS-3152
|
GDS-3154
|
GDS-3252
|
GDS-3254
|
GDS-3352
|
GDS-3354
|
| Vertical |
| Input Channels |
2Ch+EXT
|
4Ch+EXT
|
2Ch+EXT
|
4Ch+EXT
|
2Ch+EXT
|
4Ch+EXT
|
| Bandwidth |
DC~150MHz(-3dB)
|
DC~250MHz(-3dB)
|
DC~350MHz(-3dB)
|
| Rise Time |
2.3ns
|
1.4ns
|
1ns
|
| Vertical Resolution |
8 bits |
| Vertical Resolution@ 1MΩ |
2mV~5V/div |
| Vertical Resolution@ 50/75Ω |
2mV~1V/div |
| Input Coupling |
AC, DC, GND |
| Input Impedance |
1MΩ// 16pF |
| DC Gain Accuracy |
±(3% X |reading| + 0.1div+ 1mV) |
| Polarity |
Normal and inverted |
| Maximum Input Impedance @1MΩ |
300V (DC+AC peak), CAT I |
| Maximum Input Impedance @50/75Ω |
5 Vrms ,CAT I |
| OffsetPositionRange |
2mV/div ~ 100mV/div: ±0.5V
200mV/div ~ 5V/div: ±25V |
| Bandwidth Limit |
20MHz (-3dB)
|
100MHz (-3dB)
|
200MHz (-3dB)
|
| Waveform Signal Processing |
Addition, Subtraction,
multiplication, division, FFT, FFTrms |
| Trigger |
| Source |
Dual channel: CH1, CH2, Line,
Ext ; 4 channel: CH1, CH2, CH3, CH4, Line, Ext |
| Trigger Mode |
Auto (Auto (supports Roll
Mode for 100 ms/div and slower), Normal, Single |
| Trigger Type |
Edge, Pulse Width, Video, Runt,
Rise & Fall, Alternative, Event-Delay (1~65,535) events,
Time-Delay(10nS~10S), I2C, SPI, UART |
| TriggerHold-off Range |
10ns~10s |
| Coupling |
AC, DC, LF rej, HF rej, Noise
rej |
| Sensitivity |
DC~50MHz approx. 1div or 1.0mV
50MHz~150MHz approx. 1.5div or 15mV
150MHz~350MHz approx. 2div or 20mV |
| EXT
Trigger |
| Range |
±15V |
| Sensitivity |
DC~150MHz pprox.100mV
150MHz~250MHz approx. 150mV
250MHz~350MHz approx. 150mV |
| Input Impedance |
1MΩ±3%, ~16pF |
| Horizontal |
| Range |
1ns/div~100s/div (1-2-5steps);
ROLL: 100ms/div~100s/div |
| Pre-Trigger |
10div maximum |
| Post-Trigger |
1,000div |
| Accuracy |
±20 ppm over any ≧1 ms
time interval |
| Signal
Acquisition System |
| Real Time Sample Rate |
2.5GSa/s |
5GSa/s |
2.5GSa/s |
5GSa/s |
5GSa/s |
5GSa/s |
| Equivalent Time Sample Rate |
100GSa/s maximum for all models |
| Record Length |
25k points |
| Acquisition Mode |
Normal, Average, Peak Detect,
High resolution, Single |
| |
Normal: Acquire sampled values |
| |
Average: From 2 to 256 waveforms
included in average |
| |
Peak Detect: Catches glitches as
narrow as 2ns at all sweep speeds |
| |
Hi Res: Real-time boxcar
averaging reduces random noise and increases vertical resolution |
| X-Y
Mode |
| X-axis input |
Channel 1; Channel 3 |
| Y-axis input |
Channel 2; Channel 4 |
| Phase Shift |
±3° at 100kHz |
| Cursors
and Measurement |
| Cursors |
Amplitude, Time, Gating
available |
| Automatic Measurement |
28 sets: Vpp,
Vamp, Vavg, Vrms, Vhi, Vlo, Vmax, Vmin, Rise Preshoot/ Overshoot, Fall
Preshoot/Overshoot, Freq, Period, Rise Time, Fall Time, Positive Width,
Negative Width, Duty Cycle, Phase, eight different delay measurements
(FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF) |
| Cursors Measurement |
∆V, ∆T |
| Auto Counter |
6digits, range from 2Hz minimum
to the rated bandwidth |
| Power
Measurements (optional) |
| Power Quality Measurements |
VRMS, V Crest Factor, Frequency,
IRMS, I Crest Factor, True Power, Apparent Power, Reactive Power, Power
Factor, Phase Angle. |
| Harmonics |
Freq, Mag, Mag rms, Phase,
THD-F, THD-R, RMS |
| Ripple Measurements |
Vripple, Iripple |
| In-rush Current |
First peak, second peak |
| Control
Panel Functions |
| Autoset |
Single-button, automatic setup
of all channels for vertical, horizontal and trigger systems, with
undo autoset |
| Auto-Range |
Allows users to quickly move
from test point to test point without having to reset the oscilloscope for
each test point |
| Save Setup |
20 sets |
| Save Waveform |
24 sets |
| Display
System |
| TFT LCD |
8" TFT LCD SVGA color
display (LED backlight) |
| Display Resolution |
800 horizontal × 600 vertical
(SVGA) |
| Interpolation |
Sin(x)/x and equivalent time
sampling |
| Waveform Display |
Dots, Vectors, Variable
persistence, infinite persistence |
| Display Graticule |
8 x 10 divisions |
| Display Brightness |
Adjustable |
| Interface |
| RS-232C port |
DB-9port |
| USB port |
2 sets USB 2.0 high-speed host
port; 1setUSB 2.0 high speed device port |
| Ethernet |
RJ-45 port, 10/100Mbps |
| VGAVideoPort |
DB-15port, SVGA monitor
output |
| Line Output |
3.5mm stereo output jack for
Go/NoGo audio alarm |
| GPIB(Optional) |
USB to GPIB converter |
| Go/NoGo BNC |
Maximum 5V /10mA TTL open
collector ouput |
| Kensington Style Lock |
Rear panel security slot
connects to standard Kensington style lock |
| Power
Source |
| LineVoltageRange |
AC 100V ~ 240V, 48Hz ~
63Hz, Auto selection |
| Miscellaneous |
| Multi-language Menu |
Available |
| On-line Help |
Available |
| Time clock |
Time and Data ,Provide the
Data/Time for saved data |
| Dimensions and Weight |
400(W) x 200(H) x 130(D),
approx. 4 kg. |
|
|
|
|
|
|