• Shopping Cart:
  • 0
  • Total: $0.00
call today

TOLL FREE 1.800.783.6664

Voice: 813.971.5001 Fax : 813.971.5117



AC/DC Power Hi-Tester


Price starts at $9,595.00

Product Code : Hioki 3390

Manufacturer : Hioki Instruments

Add To Cart Email Friend Add To Saved Cart

Download or View this product's / series details and specifications Specifications (PDF)

Measure the Secondary Side of Inverters with Cutting Edge Technology
  • Advanced motor analysis functions (measures the electric angle and supports vector control)
  • High-speed harmonic analysis function (50 ms data refresh rate)
  • Noise analysis function for inverters (use with the FFT analysis technology)
  • Inverter power measurement with the convenience of clamp on sensors
  • Achieve the same superior accuracy as direct wiring method meters at maximum ±0.16% (when combined with the 9709)
  • LAN, USB, and CF card - a rich array of interfaces
Note: Optional current sensor is necessary to measure current or power parameters.
Basic specifications (Accuracy guaranteed for 6 months or 1 year)
Measurement line type Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, and three-phase 4-wire systems
Measurement item Voltage (U), current (I), voltage/current peak (Upk/Ipk), active power (P), reactive power (Q), apparent power (S), power factor (λ), phase angle (φ), frequency (f), current integration (Ih), power integration (WP), efficiency (η), loss (Loss), voltage/current ripple factor (Urf/Irf)
Noise measurement (FFT processing): RMS spectrum
Harmonic measurement (RMS value, content factor, phase angle, total distortion, disequilibrium factor)
Additional functions (With optional 9791 or 9793 installed in the main unit) : Torque, Rotation, Frequency, Slip, or Motor output
Harmonic measurement Input: 4ch, Synchronization frequency range: 0.5Hz to 5kHz,
Number of harmonic order: Max. 100th order
Noise measurement Number of channels: 1ch (select one channel from CH1 to CH4),
Maximum analysis frequency: 100k/ 50k/ 20k/ 10k/ 5k/ 2kHz
Measurement range Voltage range: 15/ 30/ 60/ 150/ 300/ 600/ 1500V
Current range: when using 20A rated sensor... *400m/ *800m/ 2/ 4/ 8/ 20A (* when used with Model 9277)
When using 200 A rated sensor... 4/ 8/ 20/ 40/ 80/ 200A
When using 50 A rated sensor... 1/ 2/ 5/ 10/ 20/ 50A
When using 500 A rated sensor... 10/ 20/ 50/ 100/ 200/ 500A
Depends on combination of voltage and current range
(Power range: 6.0000W to 2.2500MW)
Frequency range: 0.5Hz to 5kHz
Basic accuracy Voltage: ±0.05% rdg. ±0.05% f.s.
Current: ±0.05% rdg. ±0.05% f.s. + current sensor accuracy
Active power: ±0.05% rdg. ±0.05% f.s. + current sensor accuracy
Synchronization frequency range 0.5Hz to 5kHz
Frequency band DC, 0.5Hz to 150kHz
Data update rate 50ms (For harmonic measurement, depends on the synchronization frequency when less than 45Hz)
Display refresh rate 200ms (Independent of internal data update rate; waveform and FFT depend on the screen)
Data save interval OFF, 50m/ 100m/ 200m/ 500msec, 1/ 5/ 10/ 15/ 30sec, 1/ 5/ 10/ 15/ 30/ 60minutes
External interfaces LAN, USB (communication/ memory), RS-232C, CF card, Synchronization control
Power requirements 100 to 240V AC, 50/60Hz, 140VA max.
Dimensions, mass 340mm (13.39in) W × 170mm (6.69in) H × 157mm (6.18in) D, 4.8kg (169.3oz)
Supplied accessories Instruction Manual × 1, Measurement Guide × 1, Power cord × 1, USB cable × 1, D-sub connector × 1 (when 9792 or 9793 is installed), Color label × 2
Additional functions (option)
Measure the primary and secondary sides of inverters (Performance evaluation of motors and inverters)
Geared for the latest motor evaluation and analysis of Hybrid Electric Vehicles, Electric Vehicles and the like
Evaluate new energies such as solar power, wind power, and fuel cells
Specifications for the Motor Testing Option
(Accuracy guaranteed for 6 months or 1 year)
Number of input channels 3 channels
CH A: Analog DC input/ frequency input (torque signal input)
CH B: Analog DC input/ pulse input (rotation signal input)
CH Z: Pulse input (Z-phase signal input)
Max. input voltage ±20V (When analog/ frequency/ pulse)
Measurement item Voltage, Torque, Rotation, Frequency, Slip, Motor power
Analog DC input (CH A/ CH B) Measurement range: ±1V/ ±5V/ ±10V
Sampling: 10kHz/ 16-bit
Accuracy: ±0.1% rdg. ±0.1% f.s.
Frequency input (only for CH A) Effective amplitude range: ±5V peak
Measurement range: 100 kHz, Measurement band: 1kHz to 100kHz
Accuracy: ±0.05 % rdg. ±3 dgt.
Pulse input (only for CH B) Detection level: (Low) 0.5V or less, (High) 2.0V or more
Measurement band: 1Hz to 200kHz (When duty ratio is 50%)
Accuracy: ±0.05% rdg. ±3dgt.
Pulse input (only for CH Z) Detection level: (Low) 0.5V or less, (High) 2.0V or more
Measurement band: 0.1Hz to 1kHz
Minimum detection width: 2.5μs or more
Specifications for the D/A Output Option
(Accuracy guaranteed for 6 months or 1 year)
Number of output channels 16 channels
Output content Switchable between Waveform output/ Analog output (Select from the measurement items) *Waveform output is only for CH1 to CH8
Output voltage Analog output: DC ±5V f.s. (Max. DC ±12V)
Waveform output: 2Vrms f.s., crest factor 2.5 or more
Accuracy Analog output: Measurement accuracy ±0.2% f.s. (DC level)
Waveform output: Measurement accuracy ±0.5% f.s. (at RMS level, in synchronization frequency range)
High-precision measurement of current and power when combined with the 3390 (option)
Pass-through type high-precision sensor, wide bandwidth from DC to 100 kHz
Basic specifications (Accuracy guaranteed for 6 months)
Rated current AC/DC 500 A (continuous 700A rms Max., 1000 A peak, 50/60 Hz)
Amplitude accuracy ±0.05% rdg. ±0.01% f.s. (DC, or 45 to 66Hz, after 10 minutes of warm-up time)
Phase accuracy ±0.2° (45 to 66 Hz, after 10 minutes of warm-up time)
Frequency characteristics DC < 45Hz : ±0.2% rdg. ±0.02% f.s. (±0.3°)
5kHz < 10kHz : ±2.0% rdg. ±0.10% f.s. (±2.0°)
20kHz < 100kHz : ±30% rdg. ±0.10% f.s. (±30°)
Core dia. φ 36mm (1.42in)
Dimensions, mass 160mm (6.30in) W × 112mm (4.41in) H × 50mm (1.97in) D, 850g (30.0oz), cord length: 3m (9.84ft)
script async src="http://tp.multiview.com/dpx.js?cid=10024&action=100&segment=omnicontrols&m=1">