|
TX80
TURBINE INSERTION FLOW METERS
Fixed
depth insertion turbine flowmeters
 |
FEATURES:
- High-quality ruby bearings for excellent
low-flow performance and long life
- One easily-replaced moving part
- Pickup exerts no magnetic drag on the
rotor
- Square-wave frequency output can connect
directly to PLC's or counter controls
- Indicator or transmitter can be mounted on
the flowmeter or remote
- Fittings are available in a wide variety
of materials and sizes
| To
Order Call 1-800-783-6664 |
|
Product
Description
The TX80 Series,
Turbine Insertion Flow Meters, are turbine-type
insertion flow meters designed for use in pipe sizes
1-1/2" to 8". High-quality jewel
bearings and nickel-bound tungsten carbide shaft are
used for maximum life and extreme low friction.
Turbine Insertion Flow Meter bodies are machined from
solid rod for maximum precision. Lowflow
performance is superior for Insertion Turbine Flowmeters.
The rotation of the rotor is detected by a non-drag
Hall-effect sensor. The Insertion Turbine
Flowmeter's output is a pulse-type square wave, which
can be sent long distances (up to 2,000 feet) without a
transmitter. This signal can be connected directly
to PLC's, counters, and computer cards.
TX80 Turbine Insertion Flow Meters are ideal for
chemical proportioning applications. For rate and
total display, as well as pump pacing, the FT415 or
FT420 flow indicator can be mounted directly on the TX80
Series Insertion Turbine Flowmeter. For a 4-20mA
analog output only, the AO55, blind 4-20mA converter,
can be mounted directly onto the meter.
The TX80 Series Turbine Insertion Flow Meters require
special fittings, since they are not depth-adjustable,
installation in the fitting ensures correct depth
placement in the pipe. Fittings are available in
PVC, brass, and stainless steel. Insertion Turbine
Flowmeters are available in brass, 316 stainless steel,
and polypropylene.
Specifications
Accuracy: +1% of full scale
Flow Range: 0.2 - 30 ft/sec (.06 - 9.14 m/sec)
Sensor/Output: Hall Effect Sensor - 12 VDC
current sinking pulse
Maximum Pipe Pressure:
Polypro: 175 psi @ 75º F (12 bar)
Brass: 200 psi (14 bar)
316 SS: 250 psi (17 bar)
Maximum Temperature:
Polypro: 130º F (55º C) at 0 psi
Brass, SS: 200º F (93º C) at 0 psi
Nominal K-factor: 11 Hz/F/s (3.6Hz/M/s)
Power: 6 - 24 Vdc, 8 mA minimum
Materials:
Sensor Body: Polypro, Brass, 316 SS
Rotor: Polypro
Shaft: Nickel-bound tungsten carbide
Bearings: Ruby
Cable: #22 AWG 3-con 18' (6m)
Maximum Cable Run: 2,000' (650m)
Options
& Prices
TX81Y
Fixed Depth Turbine Insertion Flow Meter
Polypro Turbine Insertion Flow Meter, for
1-1/2" to 3" pipe diameter. |
$325 |
|
TX81B
Fixed Depth Turbine Insertion Flow Meter
Brass Turbine Insertion Flow Meter, for
1-1/2" to 3" pipe diameter. |
$395 |
|
TX81S
Fixed Depth Turbine Insertion Flow Meter
316 Stainless Steel Turbine Insertion Flow
Meter, for 1-1/2" to 3" pipe diameter. |
$460 |
|
TX82Y
Fixed Depth Insertion Turbine Flowmeters
Polypro Insertion Turbine Flowmeters, for
4" to 8" pipe diameter. |
$355 |
|
TX82B
Fixed Depth Insertion Turbine Flowmeters
Brass Insertion Turbine Flowmeters, for 4"
to 8" pipe diameter. |
$405 |
|
TX82S
Fixed Depth Insertion Turbine Flowmeters
316 Stainless Steel Insertion Turbine Flowmeters,
for 4" to 8" pipe diameter. |
$485 |
|
| Special
Fittings (Required for Installation) |
| Fittings
for TX81 Turbine Insertion Flow Meters: |
| TF81T-P-150
PVC Tee Fitting (Male stub ends),
1-1/2" Diameter |
$90 |
|
| TF81T-P-200
PVC Tee Fitting (Male stub ends),
2" Diameter |
$98 |
|
| MF82S-P-300-16
PVC Saddle Fitting, 3" Diameter |
$165 |
|
| Installed
on 16" long pipe stub. PVC
saddle is supplied with Buna-N O-rings
only. For chemical service, the
O-ring must be removed and the saddle
glued on to the pipe with PVC cement. |
|
|
| TF81T-S-150
304 Stainless Steel Tee Fitting, 1
1/2" Diameter |
$260 |
|
| TF81T-S-200
304 Stainless Steel Tee Fitting, 2"
Diameter |
$260 |
|
| MF82S-B-300
Bronze Saddle Fitting, 3" Diameter |
$195 |
|
|
| Fittings
for TX82 Insertion Turbine Flowmeters: |
| MF82S-P-400
PVC Saddle Fitting, 4" Diameter |
$150 |
|
| MF82S-P-600
PVC Saddle Fitting, 6" Diameter |
$190 |
|
| MF82S-P-800
PVC Saddle Fitting, 8" Diameter |
$215 |
|
| PVC
saddles are supplied with Buna-N O-rings
only. For chemical service, the
O-ring must be removed and the saddle
glued on to the pipe with PVC cement. |
|
|
| MF82S-B-400
Bronze Saddle Fitting, 4" Diameter |
$225 |
|
| MF82S-F-600
Ductile Iron Saddle Fitting, 6"
Diameter |
$110 |
|
| MF82S-F-800
Ductile Iron Saddle Fitting, 8"
Diameter |
$130 |
|
| MF82W-S-400
316 Stainless Steel Weld Fitting,
4" Diameter |
$150 |
|
| MF82W-S-600
316 Stainless Steel Weld Fitting,
6" Diameter |
$150 |
|
| MF82W-S-800
316 Stainless Steel Weld Fitting,
8" Diameter |
$150 |
|
|
| Optional
Output Meters/Converters |
FT415M
Battery Powered Pulse Output and Display
Meter mounted, 3V replaceable Lithium. |
$398 |
 |
FT420M
Pulse to 4-20mA Output and Display
Meter mounted, 12-24VDC. |
$395 |
|
AO55M
Blind 4-20ma Converter
Meter mounted. |
$275 |
 |
| Related
Products |
EX80
Series Fixed Depth Insertion Magmeter
Stainless Steel or PVC, for 1" to 8"
size. |
$Varies |
 |
EX100/200
Series Adjustable Depth Electromagnetic Flow
Sensor
Stainless Steel and Brass Insertion
Electromagnetic Flow Sensor, for 3" to
48" pipe diameter. |
$Varies |
|
TX100/200
Series Adjustable Turbine Insertion Flow Sensors
Stainless Steel and Brass Adjustable Turbine
Insertion Flow Sensors, for 3" to 48"
pipe diameter. |
$Varies |
 |
GL400-1-1
Data Logger, 2-Channel
Features 1 analog channel and 1 pulse channel.
Requires an external 12 VDC power source. |
$395 |
|
|
|
|
|
