- GL500A has the 4.7" color LCD display
- Built-in Ethernet 100Tx and USB 2.0 interfaces
- Accepts voltages and thermocouples (see module types below)
- 4, 8, or 16 channels (up to 8 with isolation)
- Voltage input levels: +/- 0.1V to +/- 100V
- Thermocouple input types: B, R, S, T, N, K, W, E, J
- Dual speed sampling mode allows low and high speed simultaneous recording
- 2 MS internal memory is standard
- PCM-CIA flash memory slot is standard
- Includes also 1 pulse input, 1
trigger input
Includes 4 x alarm outputs - Ultra small A5 size (210mm × 150mm × 40mm)
- Includes Windows software for setup, control, data transfer, data conversion to ASCII and Excel formats, and on-screen data review with cursors
- Plug any two input modules into your GL500:
- 4VF 4 channel voltage module, isolated
- 4MF 4 channel voltage/temperature module, isolated
- 8MS 8 channel voltage/temp module, non-isolated
- Other available options:
- B-517 battery pack (approx 1 hour operation)
- B-518 battery charger
- B-513 logic/alarm cable (4 logic inputs and 4 alarm outputs)
- B-514 DC drive cable
- Request a Demo
- Pricing info: Call 800-783-6664
- Contact Omni Controls for a price quote or to place
an order!
Main Input Number of input slots 2 Input range Voltage 20 mV - 50 V and 1-5V/ f s. Thermocouple K, J, E, T, R, S, B, N and W RTD (Resistance temperature sensor) Pt100 and JPt100 Humidity 0 to 100% RH Sampling 100ms - 1/h (100ms when 10-ch max are used) Logic input 4 channels Pulse input 1 channel (also RPM) Trigger input 1 channel Alarm output 4 channel Built-in memory 4 MB Screen 4.7" color LCD PC interface USB 2.0, Ethernet and PCMCIA card Rated power source AC adapter, battery and DC drive External size (approximately) 210 mm × 150 mm × 40 mm [A5 format] Terminal Block Module Number of channels 10-ch, 20-ch and 50-ch modules Input method Scan method, all channels isolated Isolation 125 VAC RMS and 350 VDC The GL Series midi LOGGERS from Graphtec are a whole new breed. They come equipped with 10 channels already, but are expandable to 50 or even 100 channels. There are two locations for plugging in our 10, 20, and 50 channels input modules, so you can create just the right system.
Modern conveniences such as Ethernet and USB 2.0 interfaces are included, along with a PCMCIA flash memory card port, so you can easily get the data out of your GL450 and transfer it to your computer. Data are normally captured into the GL's large internal memory, at rates selectable from 100 ms to 1/hour! You can record for hours, days, or even weeks with the 2 MS memory.
- GL450 has the 4.7" color LCD display
- Built-in Ethernet and USB 2.0 interfaces
- Accepts voltages, thermocouples, humidity, and RTD inputs
- 10ch terminal stand with M3 screws
- Continuous battery charge during operation
- 100 mS/s sampling rate max (10-ch. config.), or as slow as 1 S/hr
- Mainframe includes 10 channels - expandable with optional 10-, 20- or 50-channel modules (up to 2 modules can be used per unit)
- 2 MS internal memory is standard
- PCM-CIA flash memory slot is standard
- High input isolation is built-in! Enhanced safety and ease of connection.
- Includes also 1 pulse input, 1 trigger input
- Ultra small A5 size (210mm × 150mm × 40mm)
- 10TU 10-channel expansion module
- 20TU 20-channel expansion module
- 50TU 50-channel expansion module
- B-517 battery pack (approx. 2 hours operation)
- B-513 logic/alarm option (4 logic inputs and 4 alarm outputs)
- B-514 DC power cable
- B-515 midi LOGGER sync. cable
- B-530 Humidity sensor
- Request a Demo
- Pricing: the GL450 is $1,900 (including one 10-channel input module - other options available)
- Contact Omni Controls for a price quote or to place
an order!
-
Call: 800-783-6664 or Click Here for a Formal quote!
