HI 141 - NTC ThermoLogger Series for HACCP 1 or 2 channels. 16,000 samples (for 1 channel models) or 8,000 samples/channel (for 2 channel models). Logging interval from 1 second to 24 hours. Logging delay start up to 199 hours and magnetic start. Programmable high and low alarms. Non-volatile storage of logging parameters and data in EEPROM. IP 67 Waterproof casing. Order Information Specifications

To meet the demands for better temperature management, particularly for HACCP and food safety compliance, Hanna introduces its newest series of thermoLoggers. Now you can choose the best combination of internal and external, single or multiple sensors to meet your specific monitoring and recording requirements. The HI 141 series uses the latest NTC thermistor technology for the fastest response and results. For critical control point monitoring, we offer several models with LED indicators that tell you logging status and warn you when the temperature falls outside of the programmed values. The HI 141 can store up to 16,000 temperature samples in a protected, non-volatile EEPROM memory. You can set any interval between measurements from once per second up to every 24 hours. All of your collected data is tamper-proof and organized into serial numbered lots. The housing is waterproof to IP 67 standards and includes a convenient hanging loop. A long-life AA lithium battery provides power. For a typical 1 minute logging interval, your battery will last about 4 years. Hanna's unique Battery Error Protection System (BEPS) signals you when it is time to change the battery. Best of all, the housing is designed so you can change the battery yourself. You program and download your ThermoLogger using the HI 14001 docking station and Windows® compatible software. Infrared (IR) technology provides reliable, cable-free communications. Each lot of your collected data can be saved in a spreadsheet and are secured against tampering by a personal password.		The LCD shows current temp and sensor code plus: Countdown until the next logging event. Number of samples taken. HIGH and LOW temperature values. HIGH and LOW ALARM settings. Number of samples which have exceeded the HIGH/LOW parameters.
Choose from several models to match your requirements: Model Sensors Range HI 141A T1 internal -40.0 to 80.0 °C -40.0 to 175.0 °F HI 141B T1 internal -40.0 to 125.0 °C -40.0 to 257.0 °F HI 141C T1 internal -20.0 to 70.0 °C -4.0 to 158.0 °F HI 141D T1 internal -40.0 to 125.0 °C -40.0 to 257.0 °F HI 141E T1 internal T2 external -40.0 to 80.0 °C -40.0 to 175.0 °F -40.0 to 125.0 °C -40.0 to 257.0 °F HI 141F T1 external T2 external -40.0 to 125.0 °C -40.0 to 125.0 °C -40.0 to 257.0 °F HI 141G T1 internal T2 external -20.0 to 70.0 °C -4.0 to 158.0 °F -40.0 to 125.0 °C -40.0 to 257.0 °F HI 141J T1 external T2 external -40.0 to 125.0 °C -40.0 to 125.0 °C -40.0 to 257.0 °F	Specifications: All Models Resolution 0.1°C (-40 -to 100.0°C) 0.2°C (temp > 100.0°C) 0.1°F (-40 to 190.0°F) 0.3°F (temp > 190.0°F) Accuracy ±0.5°C (-40 to 0.0°C) ±0.4°C (0.0 to 70.0°C) ±0.5°C (70.0 to 100.0°C) ±1.0°C (temp > 100.0°C) ±1.0°F (-40 to 32.0°F) ±0.8°F (32.0 to 158.0°F) ±1.0°F (158.0 to 212.0°F) ±2.0°F (temp > 212.0°F) Diameter - HI 141 - HI 141001 86.5 mm (3.4") 159 mm (6.3") Height - HI 141 - HI 141001 35mm (1.4") 60 mm (2.3") Weight - HI 141 - HI 141001 150 g (5.5oz") 200 g (7.4oz)

	HI 9041 Easy-To-Use Wipe-Clean Microprocessor Thermometer Simple-To-Use Wipe-Clean Case Interchangeable Probes Both meters are supplied with 9V battery. Order Information Specifications

HI 9041 has only the ON/OFF key to operate the meter. Thermometers could not have been made simpler to use!

The HI 9041's casing effectively blocks the entry of dirt which might otherwise short-circuit the electronics; a common source of problems with conventional instruments. Its wipe-clean case has rounded edges making it easy to spot food and other marks.

A wide range of interchangeable probes enable the same thermometer to be used for food, air, between-pack and liquid temperature measurements. The rounded shape of the probe body resists dirt and makes cleaning easy and quick. The probe handles are color coded to avoid cross-contamination. The probes come with a 3.3' (1 m) cable connected to the top of each unit, placing them in the most convenient position. Choose the penetration probe most suitable for your application: HI 765PW (white) for general penetration, HI 765PBL (blue) for frozen food, HI 765PG (green) for vegetables and HI 765PR (red) for meat. Other probes include HI 765A for air, HI 765L for liquids, or the wire probe HI 765W for between packs.

	HI 9061 Waterproof, Microprocessor-Based Portable Thermometer Water-Resistant Case The HI 9061's casing effectively blocks the entry of dirt and moisture which might otherwise short-circuit the electronics; a common source of problems with conventional instruments. Its wipe-clean case has rounded edges making it easy to spot food and other marks. Accurate and Easy-To-Use The HI 9061 is offered in two models with built-in precision throughout the range from -50 to +150°C or -58 to 300°F. With the degree of accuracy stated on the label and a single ON/OFF button for simplicity of operation, any member of staff can be assigned to do the job. Order Information Specifications

Before developing the Foodcare® thermometers, Hanna Instruments carried out extensive research to determine the needs and preferences of the food industry. The general consensus that emerged was that the thermometers should be reliable, easy to use by non-technical personnel, easy to clean, accurate across the whole range and have long battery life with an auto shut-off for battery conservation. Last but not least they should be usable with a range of interchangeable probes and not requiring recalibration every time they are changed. The HI 9061 will give you all of these benefits and much more.

• Interchangeable Probes A wide range of interchangeable probes enable the same thermometer to be used for food, air, between pack, liquid and surface temperature measurements. The rounded shape of the probe body resists dirt and makes cleaning easy and quick. The probe handles are color coded to avoid cross-contamination. The probes come with a 1 meter (3.3') cable connected to the top of each unit, placing them in the most convenient position. Choose the probe most suitable for your application from the following: HI 765PW (white) for general penetration, HI765PBL (blue) for frozen food, HI 765PG (green) for vegetables, HI 765PR (red) for meat, HI 765A for air, HI765L for liquids, HI 765BP for between packs. The meter's accuracy can be checked with Hanna's temperature keys.

Meter is calibrated against an NIST standard. Upon request HI 9061C/C* and HI 9061F/C* models are available. Both come supplied with a Factory Calibration Certificate against NIST standard.

Specifications:

	HI 935007 K-Type °F/°C Thermocouple Thermometer With Direct Probe Simple-To-Use Wipe-Clean Case Interchangeable Probes HI 935007 is supplied with 9V battery. Order Information Specifications

HI 935007 completes the range of compact thermometers offering an extensive measurement range in both Celsius and Fahrenheit. It can read temperature accurately from -50 to 950°C and -58 to 1742°F. The resolution is 0.1°C or 0.2°F in the lower scale and 1°C or 1°F at high temperatures.

HI 935007 is launched at such an attractive price to make it possible for every operator to carry his or her own professional instrument. And this is not all! A fixed K-type penetration HI 766C probe with 3 feet of cable is also included with the meter. HI 935007 is supplied with a 9V battery providing 500 hours of continuous battery life.

Add to these the Hanna two-year parts and labor warranty and you have got yourself a product for years of trouble-free operation! Use the Hanna optional HI 710007 shockproof boot to prolong your meter's life and improve its performance. The HI 710007 rubber boot is designed to hug the meter so tightly that our engineers during the conventional endurance tests gave up trying to break it! HI 935007, clad in a boot, was at one stage thrown against a cement wall without having any adverse effect on its performance.

	CheckTemp® 4 - Folding Thermometer with Heavy Duty Probe Folding probe makes the CheckTemp® 4 smaller and easier to carry. Cal-Check is performed each time the meter is turned on. Battery ERR message when batteries need replacement. Auto shut-off after 8 minutes. Order Information Specifications

The CheckTemp^® 4 gives you practical solutions to temperature measurement for food service. As you unfold the stainless steel probe, the CheckTemp^® 4 automatically turns ON and immediately performs a calibration test. This unique Hanna feature, Cal-Check, provides you the security of knowing you have accurate measurements. Cal-Check lets you know if your battery level is too low or if your thermometer requires re-calibration. The integrity of CheckTemp^® 4's high accuracy is made possible by using more calibration points within its solid-state electronics.

Special attention was given to the design of the CheckTemp^® 4. This thermometer fits comfortably and securely in your hand. The oversized liquid crystal display is easy to see and read. The fast responding folding probe is made high quality, stainless steel and can penetrate semi-frozen and semi-solid foods like meats, ice cream and cheeses. The probe unfolds to several different positions making it easier to reach your samples. When you are finished using your CheckTemp^® 4, wipe the probe clean and fold it away. The CheckTemp^® 4 automatically turns OFF so you can safely carry it in your pocket. We have even included a wrist strap for extra security. Let Hanna Instruments provide you with the practical solutions for quality control, food safety and HACCP compliance.

	HI 93501 Accurate and Affordable Thermistor Thermometer Simple-To-Use Wipe-Clean Case Interchangeable Probes HI 93501 is supplied with 9V battery. Order Information Specifications

HI 93501 has been designed for those users who need an accurate yet an inexpensive instrument.

For a fraction of the cost of lab-grade meters, you can now receive a handy thermometer with ±0.4°C accuracy and with a measurement range spanning from -20 to 120°C. If this was just not good enough, Hanna will send you this hi-tech meter with an interchangeable HI 762PWL probe all included in the low price!

You can choose from a host of Hanna washable HI 762 probes, or even use any of the available HI 76S2 custom sensors. The HI 762 probe sensors are precalibrated in the factory which means that you can simply swap the probe with a new one without having to readjust the meter. There is a host of Hanna accessories, such as shockproof rubber boots or carrying cases produced to prolong the life of your unit. As with all Hanna thermometers, HI 93501 boasts a long battery life and incorporates Battery Error Preventive System electronics. The Hanna exclusive BEPS ensures that you are first informed of a low battery situation with ample time to change the common 9V battery. BEPS then shuts the meter down completely if erroneous readings may be taken due to low voltage.

	HI 93503 Thermistor Thermometer With Interchangeable Probe and Optional Boot Simple-To-Use Wipe-Clean Case Interchangeable Probes HI 93503 is supplied with 9V battery. Order Information Specifications

The thermistor-based HI 93503 measures temperature over the full range of -50 to 150°C with 0.1°C resolution. HI 93503 is also supplied complete with the rugged HI 765PWL probe.

The HI 765 probes are precalibrated in the factory with a miniaturized printed circuit board sealed in the handle. Every probe is calibrated at two points, high and low, with state-of-the-art instrumentation. All this means that you can simply swap the probe with a new one without having to readjust the meter. This is also true if you are switching a 1 meter cable probe with another sensor with even a 10 meter (3.3') long lead.

There is a wide range of Hanna accessories, such as shockproof rubber boots or carrying cases produced to prolong the life of your unit. As with other Hanna thermometers, HI 93503 boasts a long battery life and incorporates Battery Error Preventive System electronics. The Hanna exclusive BEPS insures that your are first informed of a low battery situation with ample time to change the common 9V battery. BEPS then shuts the meter down completely if erroneous readings may be taken due to low voltage. In fact, with HI 93503, the only surprise you are ever likely to encounter is the low price!

	HI 99161 Waterproof and heavy-duty Automatic Calibration- Choose between five memorized buffers to automatically calibrate the instrument. Messages on the Display- The operator is guided through operation on the LCD. Automatic Temperature Compensation - With ATC, pH readouts are always accurate and precise. Order Information Specifications

HI 99161’s waterproof casing provides excellent protection from water and humidity typically present in the food industry. HI 99161 comes supplied with the FC 202D pH electrode with built-in temperature sensor specially designed for use in the food sector. This electrode features a rugged, easy to clean, Kynar® body that tapers to a strong conic tip ideal for measurements in semisolids such as meats and cheeses. The electrode has a free diffusion sleeve type reference junction which prevents the typical problems of clogging in viscous liquids or samples with high solids content such as milk or condiments. The reference electrolyte used in the FC 202D is free from the poisonous silver chloride which prevents food contamination by the electrode. HI 99161 allows push button calibration at either NIST or standard buffer sets with auto recognition and a stability indicator. The temperature is always displayed on the secondary level of the large LCD.

	HI 147 Checkfridge Thermometer Magnet Easily monitors inside temperature of refrigerators and freezers. Fast responding food grade stainless steel probe. Strong magnetic backing for simple outside attachment. Easy to keep clean. Exclusive Hanna Cal-check accuracy feature. Order Information Specifications

At the center of today's trend in high efficiency refrigeration and freezer construction is sophisticated internal electronics and sensors. Few manufacturers have given any thought to providing the user a convenient means to monitor internal temperature conditions from the outside. When the contents of freezer and refrigeration units must be monitored to ensure their safety and preservation, you need a thermometer just as sophisticated and efficient. The HI 147 is the ideal choice when you need accurate and reliable temperature monitoring.

How do you know when the reading on any thermometer is correct? You could make ice / heat baths and compare the thermometer against a reference thermometer, factory calibrated using the NIST standard. With HI 147, you do not need to take the time to perform these tests. Its unique Cal-Check feature can do it for you. Conveniently located on the face of the thermometer is a TEST switch. Engage the switch, and the HI 147 performs an internal calibration check. In only a few seconds, you see the results on the large liquid crystal display. Return the switch to the READ position, and the HI 147 returns to its normal measuring function. Cal-Check, from Hanna Instruments, you can depend on it.