Generation Analog
Oscilloscope
|
|
FEATURES： |
2 Channels, 4 Traces：DC ~ 30MHz (GOS-6030/6031) DC ~ 50MHz (GOS-6050/6051) |
|
|
1mV/DIV ~ 20V/DIV |
|
|
CRT Readout |
|
|
Cursor Measurement, 6 Digit Frequency Counter, 10 Sets Memory
for Front Panel Setting Save & Recall (GOS-6031/6051) |
|
|
ALT MAG Function (x5, x10, x20) |
|
|
Vertical Mode Triggering |
|
|
TV Synchronization |
|
|
CH1 Signal Output, Z-axis Input |
|
|
Buzzer Alarm & LED Indicators |
|
|
Compact size (275W x 130H x 370D mm) and Front Panel Layout
Groups for easy to use |
Data Sheet
User
Manual |
|||||||||||||||||||||
| SPECIFICATIONS | |||||||||||||||||||||
|
|
Type |
|
|||||||||||||||||||
| Accelerating Potential | GOS-6051/6050
approx.10kV GOS-6031/6030 approx.2kV |
||||||||||||||||||||
| INTEN and FOCUS | Front panel control | ||||||||||||||||||||
| Illumination | Provided (GOS-6031/6051) | ||||||||||||||||||||
| Trace Rotation | Provided | ||||||||||||||||||||
| Z-axis input | Sensitivity: at least 5V | ||||||||||||||||||||
| Polarity: positive going input decrease intensity | |||||||||||||||||||||
| Usable frequency range: DC to 2MHz | |||||||||||||||||||||
| Maximum input voltage: 30V (DC+AC peak) at 1kHz or less | |||||||||||||||||||||
| GOS-6051/6050
Input impedance: approx. 33kΩ GOS-6031/6030 Input impedance: approx. 47kΩ |
|||||||||||||||||||||
|
|
|||||||||||||||||||||
|
VERTICAL SYSTEM |
Sensitivity and Accuracy | 1mV ~ 2mV/DIV + 5%, 5mV ~ 20V/DIV + 3%, 14 calibrated steps in 1-2-5 sequence | |||||||||||||||||||
| Vernier Vertical Sensitivity | Continuously variable to 1/2.5 or less panel indicate value | ||||||||||||||||||||
| Bandwidth (-3dB) and Rise Time |
|
||||||||||||||||||||
| Maximum Input Voltage | 400V (DC + AC peak) at 1kHz or less | ||||||||||||||||||||
| Input Coupling | AC, DC, GND | ||||||||||||||||||||
| Input Impedance | 1MΩ + 2% // approx. 25pF | ||||||||||||||||||||
| Vertical Modes | CH1, CH2, DUAL (CHOP, ALT), ADD, CH2 INV | ||||||||||||||||||||
| CHOP Frequency | Approx. 250kHz | ||||||||||||||||||||
| Dynamic Range | GOS-6031/6030:8
DIV at 20MHz, 6 DIV at 30MHz GOS-6051/6050:8 DIV at 40MHz, 6 DIV at 50MHz |
||||||||||||||||||||
|
|
|||||||||||||||||||||
|
HORIZONTAL SYSTEM |
Sweep Time | 0.2µS/DIV ~ 0.5S/DIV, 20 steps selectable in 1-2-5 sequence, continuous variable control between steps at least 1：2.5 | |||||||||||||||||||
| Accuracy | + 3%, + 5% at x5, x10 MAG. + 8% at x20 MAG | ||||||||||||||||||||
| Sweep Magnification | x5, x10, x20 MAG | ||||||||||||||||||||
| Maximum
Sweep Time (at MAG) |
GOD-6051/6050: 20nS/DIV (10nS/DIV are uncalibrated) | ||||||||||||||||||||
| GOD-6031/6030: 100nS/DIV (10nS/DIV ~ 40nS/DIV are uncalibrated) | |||||||||||||||||||||
| ALT-MAG Function | Available | ||||||||||||||||||||
|
|
|||||||||||||||||||||
|
TRIGGER |
Trigger Modes | AUTO, NORM, TV | |||||||||||||||||||
| Trigger Source | VERT-MODE, CH1, CH2, LINE, EXT | ||||||||||||||||||||
| Trigger Coupling | AC, HFR, LFR, TV-V(-), TV-H(-) | ||||||||||||||||||||
| Trigger Slope | "+" or "-" polarity | ||||||||||||||||||||
| Trigger Sensitivity |
|
||||||||||||||||||||
| TV sync pulse more than 1 DIV (CH1, CH2, VERT-MODE) or 200mV(EXT) | |||||||||||||||||||||
| External Trigger Input | Input Impedance：Approx. 1MΩ // 25pF (AC coupling) | ||||||||||||||||||||
| Max. input voltage：400V (DC + AC peak) at 1kHz | |||||||||||||||||||||
| Hold-off Time |
Variable |
||||||||||||||||||||
|
|
|||||||||||||||||||||
|
X-Y OPERATION |
Input | X-axis：CH1；Y-axis：CH2 | |||||||||||||||||||
| Sensitivity | 1mV/DIV ~ 20V/DIV | ||||||||||||||||||||
| Bandwidth | X-axis：DC ~ 500kHz (-3dB) | ||||||||||||||||||||
| Phase Difference | 3º or less from DC to 50kHz | ||||||||||||||||||||
|
|
|||||||||||||||||||||
|
OUTPUT SIGNAL |
|||||||||||||||||||||
| Trigger Signal Output | Voltage：
approx. 20mV/DIV (with 50Ω terminated)； Bandwidth：50Hz to at least 5MHz |
||||||||||||||||||||
| Calibrator Output | Voltage：0.5V + 3%；Frequency：approx. 1kHz, Square wave | ||||||||||||||||||||
|
|
|||||||||||||||||||||
|
CURSOR READOUT |
Panel Setting Display | CH1/CH2 sensitivity, sweep time, trigger condition | |||||||||||||||||||
| Panel Setting Save & Recall (GOS-6031/6051) | 10 sets | ||||||||||||||||||||
| Cursor
Measurement (GOS-6031/6051) |
Cursor measurement function：ΔV, ΔT, 1/ΔT | ||||||||||||||||||||
| Cursor
resolution：1/25 DIV； Effective cursor range：vertial: + 3 DIV, horizontal: + 4 DIV |
|||||||||||||||||||||
| Frequency
Counter (GOS-6031/6051) |
Display digits：Max. 6-digits decimel | ||||||||||||||||||||
| Frequency
range：GOS-6051：50Hz ~ 50MHz；Accuracy：+
0.01% Frequency range：GOS-6031：50Hz ~ 30MHz；Accuracy：+ 0.01% |
|||||||||||||||||||||
| Measuring sensitivity：more than 2 DIV (measuring source selected from CH1 or CH2 as synchronous signal sources) | |||||||||||||||||||||
|
|
|||||||||||||||||||||
| POWER SOURCE | AC 100V/120V/ 230V + 10%, 50/60Hz | ||||||||||||||||||||
|
|
|||||||||||||||||||||
| ACCESSORIES | Power cord x 1, Instruction manual x 1, Probes(10:1/1:1) x 2 | ||||||||||||||||||||
|
|
|||||||||||||||||||||
| DIMENSIONS & WEIGHT | 275(W) x 130(H) x 370(D) mm, Approx. 7.2kg | ||||||||||||||||||||
|
|
| FEATURES
: |
|
50 MHz, Dual Channel |
|
Delayed Sweep |
|
Built-in Delay Line |
|
TV Synchronization |
|
Z axis input |
|
ALT Triggering Function |
|
Hold off Function |
|
Trigger level lock function |
|
CH1 output |
|
Data Sheet
User
Manual |
||
| SPECIFICATIONS | ||
|
|
Type |
|
| Phosphor | P31 | |
| Accelerating Potential | 12 kV | |
| Illumination | Continuously adjustable | |
| Z-axis input | Input Impedance : Approx. 5kΩ | |
| Sensitivity : Above 3Vp-p | ||
| Bandwidth : DC ~ 5MHz | ||
|
|
||
|
VERTICAL SYSTEM |
Sensitivity | 5mV ~ 5V/DIV +3%, 1mV ~ 2mV/DIV +5% |
| Bandwidth | DC ~ 50MHz | |
| DC ~ 15MHz at 1mV ~ 2mV/DIV | ||
| Rise Time | 7nS (23.3nS at 1mV ~ 2mV/DIV) | |
| Signal Delay | Leading edge can be monitored | |
| Input Impedance | Approx. 1MΩ | |
| Input Coupling | AC, DC, GND | |
| Vertical Mode | CH1, CH2, DUAL, CH2 INV, ADD.(Dual automatic switching ALT and CHOP) | |
|
|
||
|
HORIZONTAL SYSTEM |
A (main) Sweep Time | 0.1µS
~ 0.5S / DIV+3%, 100nS ~ 50mS / DIV+5% (x 10MAG), 10nS ~ 50nS/DIV+8% (x 10MAG) |
| B (delay) Sweep Time | 0.1µS
~ 0.5mS / DIV+3%, 100nS ~ 50µS / DIV+5%(x 10MAG), 10nS ~ 50nS / DIV+8% (x 10MAG) |
|
| Delay Time | 1µS ~ 5mS, +5% | |
| Delay Time Jitter | Better than 1:10000 | |
|
|
||
|
TRIGGER |
Trigger Mode | AUTO, NORM, SINGLE |
| Trigger Source | CH1, CH2, ALT, LINE, EXT | |
| Trigger Coupling | AC, DC, HR, REJ, TV | |
| Trigger Slope | "+" or "-" | |
|
|
||
|
X-Y OPERATION |
Sensitivity | 5mV ~ 5V / DIV+ 4% |
| X-axis Bandwidth | DC ~ 2MHz | |
| Phase Error | 3º or less from DC ~ 100kHz | |
|
|
||
|
OUTPUT SIGNAL |
Trigger Signal Output | Voltage : approx. 50mV / DIV into 50Ω |
| Calibrator Output | 1kHz Squarewave, 2Vpp+2% | |
|
|
||
| POWER SOURCE | AC 100V / 120V / 220V / 230V + 10%, 50 / 60Hz | |
|
|
||
| ACCESSORIES | Power cord
x 1; Instruction manual x 1 ; Probes(10:1/1:1)x2 |
|
|
|
||
| DIMENSIONS & WEIGHT | 310(W) x 150(H) x 455(D) mm；Approx. 8.2kg | |
|
|
| FEATURES : |
|
35 MHz, Dual Channel |
|
High sensitivity 1mV/DIV |
|
TV Synchronization |
|
Z axis input |
|
ALT Triggering Function |
|
Hold Off Function |
|
CH1 output |
|
Data Sheet
User
Manual |
||
| SPECIFICATIONS | ||
|
|
Type |
|
| Z-axis input | Input Impedance : Approx. 5kΩ | |
| Sensitivity : Above 3Vp-p | ||
| Bandwidth : DC ~ 5MHz | ||
|
|
||
|
VERTICAL SYSTEM |
Sensitivity | 5mV ~ 5V / DIV +3%, 1mV ~ 2mV / DIV +5% |
| Bandwidth | DC ~ 35MHz | |
| DC ~ 10MHz at 1 ~ 2mV / DIV | ||
| Rise Time | 10nS (35nS at 1mV ~ 2mV / DIV) | |
| Input Impedance | Approx. 1MΩ | |
| Input Coupling | AC, DC, GND | |
| Vertical mode | CH1,
CH2, DUAL, ADD, CH2 INV (Dual automatic switching ALT and CHOP) |
|
|
|
||
|
HORIZONTAL SYSTEM |
Sweep Time | 0.1µS
~ 0.5S / DIV+3%； 100nS ~ 50mS / DIV+5% (x 10MAG)； 10nS ~ 50nS+8% (x 10MAG) |
|
|
||
|
TRIGGER |
Trigger Mode | AUTO, NORM |
| Trigger Source | CH1, CH2, ALT, LINE, EXT | |
| Trigger Coupling | AC, DC, HF, REJ, TV | |
| Trigger Slope | "+" or "-" | |
|
|
||
|
X-Y OPERATION |
Sensitivity | 5mV ~ 5V / DIV+4% |
| X - axis Bandwidth | DC ~ 1MHz | |
| Phase Error | 3º or less from DC ~ 50kHz | |
|
|
||
|
OUTPUT SIGNAL |
Trigger Signal Output | Voltage : approx. 50mV/DIV into 50Ω |
| Calibrator Output | 1kHz Square wave, 2Vpp+2% | |
|
|
||
| POWER SOURCE | AC 100V / 120V / 220V / 230V+10%, 50 / 60Hz | |
|
|
||
| ACCESSORIES | Power
cord x 1, Instruction manual x 1, Probes (10 1/1 :1)x2 |
|
|
|
||
| DIMENSIONS & WEIGHT | 310(W) x 150(H) x 455(D) mm；Approx. 8.2kg | |
|
|
| FEATURES : |
|
20 MHz, Dual Channel |
|
High sensitivity 1mV/DIV |
|
TV Synchronization |
|
Z axis input |
|
ALT Triggering Function |
|
Hold Off Function |
|
CH1 output |
| Data
Sheet User
Manual |
||
| SPECIFICATIONS | ||
|
|
Type |
6-inch rectangular type with internal graticule 8 x 10 DIV (1 DIV=1 cm) |
| Z-axis input | Input Impedance : Approx. 5kΩ | |
| Sensitivity : Above 3Vp-p | ||
| Bandwidth : DC ~ 5MHz | ||
|
|
||
|
VERTICAL SYSTEM |
Sensitivity | 5mV ~ 5V / DIV +3%, 1mV ~ 2mV / DIV +5% |
| Bandwidth | DC ~ 20MHz | |
| DC ~ 10MHz at 1 ~ 2mV / DIV | ||
| Rise Time | 17.5nS (35nS at 1mV ~ 2mV / DIV) | |
| Input Impedance | Approx. 1MΩ | |
| Input Coupling | AC, DC, GND | |
| Vertical mode | CH1,
CH2, DUAL, ADD, CH2 INV (Dual automatic switching ALT and CHOP) |
|
|
|
||
|
HORIZONTAL SYSTEM |
Sweep Time | 0.1µS
~ 0.5S / DIV+3%； 100nS ~ 50mS / DIV+5% (x 10MAG)； 10nS ~ 50nS+8% (x 10MAG) |
|
|
||
|
TRIGGER |
Trigger Mode | AUTO, NORM |
| Trigger Source | CH1, CH2, ALT, LINE, EXT | |
| Trigger Coupling | AC, DC, HF, REJ, TV | |
| Trigger Slope | "+" or "-" | |
|
|
||
|
X-Y OPERATION |
Sensitivity | 5mV ~ 5V / DIV+4% |
| X-axis Bandwidth | DC ~ 1MHz | |
| Phase Error | 3º or less from DC ~ 50kHz | |
|
|
||
|
OUTPUT SIGNAL |
Trigger Signal Output | Voltage : approx. 50mV / DIV into 50Ω |
| Calibrator Output | 1kHz Squarewave, 2Vpp+2% | |
|
|
||
| POWER SOURCE | AC 100V / 120V/220V / 230V + 10%, 50 / 60Hz | |
|
|
||
| ACCESSORIES | Power
cord x 1 ; Instruction manual x 1 ; Probes(10:1/1:1) x 2 |
|
|
|
||
| DIMENSIONS & WEIGHT | 310(W) x 150(H) x 455(D) mm；Approx. 8.2kg | |
20MHz Oscilloscope + Function Generator
|
|
FEATURES： |
|
Built-in 1MHz
Function Generator |
|
|
20 MHz, Dual
Channel |
|
|
High Sensitivity
1mV/DIV |
|
|
TV
Synchronization |
|
|
Z axis input |
|
|
ALT Triggering
Function |
|
|
CH1 output |
|
|
Economic Choice
for High Quality |
|
Data Sheet User
Manual |
||
| SPECIFICATIONS | ||
|
|
Type |
|
| Phosphor | P31 | |
| Accelerating Potential | 2 kV | |
| Z-axis input | Sensitivity：Above 5Vpp | |
| Max. input voltage：30V (DC+AC peak) | ||
| Bandwidth：DC ~ 2MHz | ||
| Polarity | Positive-going input decrease | |
| Focus Control | Auto focus | |
|
|
||
|
FUNCTION GENERATOR |
Frequency Range |
0.1Hz ~ 1MHz (7range) |
| Waveform | Sine Wave, Square Wave, Triangle Wave | |
| Frequency Variable Range | 10：1 or more | |
| Output Impedance | 50Ω +10% | |
| Voltage | Over 14Vpp (open circuit) continuous conversion | |
| DC offset possible over + 6V when open | ||
| Sinewave Distortion | 2% Max. (10Hz ~ 100kHz) | |
| Squarewave Unsymmetry | +3% or less (in 1kHz maximum) | |
| Squarewave Rise/Fall Time | 50Ω output：120nS or less | |
|
|
||
|
VERTICAL SYSTEM |
Sensitivity | 5mV ~ 5V/DIV+3%, 1mV ~1V/DIV+5% (using x 5MAG) |
| Bandwidth | DC to 20MHz (x 5MAG：DC to 7MHz) | |
| Rise Time | Approx. 17.5nS (x 5MAG：Approx. 50nS) | |
| Max. Input | 300V (DC+AC peak) at 1kHz | |
| Input Coupling | AC, DC, GND | |
| Input Impedance | Approx. 1MΩ// 25pF | |
| Vertical Mode | CH1, CH2, DUAL(ALT, CHOP), ADD, CH2 INV | |
|
|
||
|
HORIZONTAL SYSTEM |
Sweep Time | 0.2µS / DIV ~ 0.5S / DIV+3%, (+5% at x 10MAG) |
| Max. Sweep Rate | 100nS / DIV (20nS and 50nS / DIV are uncalibrated) | |
|
|
||
|
TRIGGER |
Trigger Mode | AUTO, NORM, TV-V, TV-H |
| Trigger Source | CH1, CH2, ALT, LINE, EXT | |
| Trigger Slope | "+" or "-" | |
|
|
||
|
X - Y OPERATION |
Sensitivity | 5mV ~ 5V / DIV+4% |
| X - axis Bandwidth | DC ~ 500kHz | |
| Phase Error | 3º or less from DC ~ 50kHz | |
|
|
||
|
OUTPUT SIGNAL |
Trigger Signal Output | Voltage：approx. 20mV / DIV into 50Ω |
| Bandwidth：50Hz to 5MHz (-3dB) | ||
| Impedance：Approx. 50Ω | ||
| Calibrator Output | 1kHz Squarewave, 2Vpp+2% | |
|
|
||
| POWER SOURCE | AC 115V / 230V + 15%, 50/60Hz | |
|
|
||
| ACCESSORIES | Power
cord x 1, Instruction manual x 1, Probes(10:1/1:1) x 2, |
|
|
|
||
| DIMENSIONS & WEIGHT | 310(W) x 150(H) x 455(D) mm；Approx. 8.5kg | |
|
|
| FEATURES： |
|
10 MHz, Single Channel |
|
With TV Sync. Mode |
|
High Sensitivity 5mV/DIV |
|
Easy to Operate |
|
Low Cost, High Performance |
|
Designed for Education, Student, Hobbyist and Maintenance use |
|
Data Sheet User
Manual |
|
| SPECIFICATIONS | |
CRT |
|
| Display area |
75mm round screen CRT, 8 x 10 DIV (6mm/DIV) |
| Accelerating Potential | Approx. 1.2kV |
|
|
|
| VERTICAL SYSTEM | |
| Sensitivity |
5mV ~ 5V in 4 decade steps |
| Bandwidth |
DC ~ 10MHz |
| Accuracy |
Within+3% (at line Voltage+5%) |
| Input Impedance |
1MΩ+5% within 35pF |
| Max. Input | 600Vpp or 300Vpk (DC+AC peak), <1kHz |
|
|
|
| HORIZONTAL SYSTEM | |
| Sweep Rate |
10mS ~ 0.1µS in 6 decade steps |
| Accuracy | Within +5% (at line Voltage+5%) |
|
|
|
| TRIGGER | |
| Trigger Mode |
AUTO, NORM, EXT, TV |
| Trigger Source |
INT, EXT |
| EXT. |
Trigger Max. input voltage : 600Vpp or 300Vpk (DC+AC peak) |
| Input Impedance |
1MΩ+5% within 35pF |
|
|
|
| X-Y OPERATION | |
| Freq. Response |
DC ~ 500kHz (-3dB) |
|
Sensitivity : approx. 0.1V/DIV |
|
| Input Impedance |
1MΩ+5% within 35pF |
| Max. Input Voltage | 600Vpp or 300Vpk (DC+AC peak) |
| Phase Error | 3º or less at 10kHz |
|
|
|
| CALIBRATOR |
1kHz+5%, square wave, 0.25Vpp+3% |
|
|
|
| POWER SOURCE |
AC 115/220/230V+10%, 50/60Hz |
|
|
|
| ACCESSORIES |
Power cord x
1, |
|
|
|
| DIMENSIONS & WEIGHT |
132(W) x 210(H) x 298(D) mm ; Approx. 4.6kg |
