DC TRIPLE POWER SUPPLY

        
                      

                                   MSRP $460
        
         GPC-3030D (DIGITAL)



                gpc-3030dq.JPG


GPC-3030DQ (DIGITAL)
            Triple Output
Four Digital Panel Meter
            Auto Tracking
Triple Output
            Auto Series and Parallel Operation
Auto Tracking
            Constant Voltage and Constant Current Operation
Auto Series and Parallel Operation
            Low Ripple and Noise
Constant Voltage and Constant Current Operation
            Internal Select for Continuous or Dynamic Load　
Low Ripple and Noise
            Overload and Reverse Polarity Protection
Internal Select for Continuous or Dynamic Load
            3 1/2 Digits 0.5" LED Display
Overload and Reverse Polarity Protection
            5V, 3A Fixed Output
3 1/2 Digits 0.39" LED Display
     
5V, 3A Fixed Output
          
    Data Sheet
     User Manual
 
      SPECIFICATIONS
      OPERATION
      MODE		 Independent Two independent outputs and 5V fixed output
Output from 0 to rating volts and 0 to rating amperes
Series Output from 0 to + rating volts at rating amperes each
Output from 0 to double rating volts at rating amperes
Parallel Output from 0 to double rating amperes at rating volts
      5V FIXED 
      OUTPUT		 Regulation Line regulation < 5mV
Load regulation < 10mV
Ripple & Noise < 2mVrms
Voltage Accuracy 5V + 0.25V
Output Current 3A
      TRACKING
      OPERATION		 Tracking Error < 0.5% + 10mV of the master
Series Regulation < 300mV
      CONSTANT 
      VOLTAGE
      OPERATION		 Regulation Line regulation < 0.01% + 3mV
Load regulation < 0.01% + 3mV (rating current < 3A)
< 0.02% + 5mV (rating current < 10A)
Ripple & Noise < 1mVrms 5Hz ~ 1MHz
Recovery Time < 100µS (50% Load change, Minimum load 0.5A)
      CONSTANT 
      CURRENT
      OPERATION		 Regulation Line regulation < 0.2% + 3mA
Load regulation < 0.2% + 3mA
Ripple Current < 3mArms
      METER Digital 3 1/2 digits 0.5" LED display
3 1/2 digits 0.39" LED display ( for GPC-3030DQ )
Accuracy + (0.5% of rdg + 2 digits)
      INSULATION

 

 Chassis and Terminal 20MΩ or above ( DC 500V )
Chassis and AC Cord 30MΩ or above ( DC 500V )
      POWER            
      SOURCE		 AC 100V/120V/220V/240V+10%, 50/60Hz
      ACCESSORIES Instruction manual x 1,
Power cord x 1
Test lead GTL-105 x 3 (<3A) or GTL-104 x 3 (<10A)
      DIMENSIONS 255(W) x 145(H) x 335(D) mm
 
     SELECTION GUIDE
    Model Independent Series Parallel
 

Digital

 GPC-1850D 0~18V x 2,    0~5A x 2 36V 5A 18V 10A
GPC-3020D 0~30V x 2,    0~2A x 2 60V 2A 30V 4A
GPC-3030D 0~30V x 2,    0~3A x 2 60V 3A 30V 6A
GPC-3030DQ 0~30V x 2,    0~3A x 2 60V 3A 30V 6A

D.C. TRIPLE POWER SUPPLY HIGH DIGITAL 


Patent No：81011

    

GPC-HIGH (DIGITAL)

MSRP $825

FEATURES :   
Triple Output
Auto Tracking
Auto Series and Parallel Operation
Constant Voltage and Constant Current Operation
Low Ripple and Noise
Two Digital Panel Meter
Internal Select for Continuous or Dynamic Load
Overload and Reverse Polarity Protection
5V, 3A Fixed Output
Data Sheet
 
    SPECIFICATIONS

     OPERATION MODE
Independent
Two independent outputs and 5V fixed output
Output from 0 to rating volts and 0 to rating amperes
Series Output from 0 to + rating volts at rating amperes each
Output from 0 to double rating volts at rating amperes
Parallel Output from 0 to double rating amperes at rating volts
     5V FIXED OUTPUT Regulation Line regulation < 5mV
Load regulation < 10mV
Ripple & Noise < 2mVrms
Voltage Accuracy 5V + 0.25V
Output Current 3A
     TRACKING OPERATION Tracking Error < 0.5% + 10mV of the master
Series Regulation < 300mV
     CONSTANT VOLTAGE
     OPERATION		 Regulation Line regulation < 0.01% + 3mV
Load regulation < 0.01% + 5mV (rating current < 10A)
                       < 0.02% + 5mV (rating current > 10A)
Ripple & Noise < 1mVrms 5Hz ~ 1MHz
Recovery Time < 100µS (50% Load change, Minimum load 0.5A)
     CONSTANT CURRENT
     OPERATION		 Regulation Line regulation < 0.2% + 3mA
Load regulation < 0.2% + 3mA
Ripple Current < 3mArms
     METER Analog V-meter and I-meter each one
2.5 class
Dimension 50 x 50 mm
Digital 3 1/2 digits 0.5" LED display
Accuracy + (0.5% of rdg + 2 digits)
     INSULATION Chassis and Terminal 100MΩ or above ( DC 1000V )
Chassis and AC Cord 100MΩ or above ( DC 1000V )
     POWER SOURCE AC 100V/120V/220V/240V+10%, 50/60Hz
     ACCESSORIES Instruction manual x 1,
Power cord x 1
Test lead GTL-105 x 3 (<3A) or GTL-104 x 3 (<10A)
     DIMENSIONS 255(W) x 145(H) x 420(D) mm
   
   
    SELECTION GUIDE
　 Model Independent Series Parallel

Digital

 GPC-6030D 0~60V x 2,    0~3A x 2 120V 3A 60V 6A
GPC-3060D 0~30V x 2,    0~6A x 2 60V 6A 30V 12A

D.C. POWER SUPPLY (100 ~ 200VA)                                                                      

       
  GPR-M SERIES (DIGITAL TYPE)

MSRP $360
0.01% High Regulation
Constant Voltage and Constant Current Operation
Internal Select for Continuous or Dynamic Load
Low Ripple and Noise
Overload and Reverse Polarity Protection
3 1/2 Digits 0.5" LED Display

Data Sheet
User Manual
 
    SPECIFICATIONS

     CONSTANT VOLTAGE
     OPERATION
Regulation
Line regulation < 0.01% + 3mV
Load regulation < 0.01% + 5mV ( < 10A)
                        < 0.02% + 5mV ( > 10A)
Ripple & Noise < 1mVrms 5Hz ~ 1MHz
Recovery Time < 100µS (50% Load change, Minimum load 0.5A)
Output Range 0 to rating voltage continuously adjustable
     CONSTANT CURRENT
     OPERATION		 Regulation Line regulation < 0.2% + 3mA
Load regulation < 0.2% + 3mA
Ripple Current < 3mArms
Output Range 0 to rating amperes continuously adjustable
     METER Analog V-meter and I-meter each one
2.5 class
Dimension 60 x 80 mm
Digital 3 1/2 digits 0.5" LED display
Accuracy + (0.5% of rdg + 2 digits)
     INSULATION Chassis and Terminal 20MΩ or above ( DC 500V )
Chassis and AC Cord 30MΩ or above ( DC 500V )
     POWER SOURCE AC 100V/120V/220V/240V+10%, 50/60Hz 
     ACCESSORIES Instruction manual x 1,
Power cord x 1
Test lead GTL-105 x 1 (<3A) or GTL-104 x 1 (<10A)
     DIMENSIONS 255(W) x 145(H) x 335(D) mm
   
   
    SELECTION GUIDE
　 Model Output Volts (V) Output Amps (A)
Digital GPR-1810HD 0 ~ 18 0 ~ 10
GPR-3060D 0 ~ 30 0 ~ 6
GPR-6030D 0 ~ 60 0 ~ 3

D.C. POWER SUPPLY (200 ~ 500VA)                                                                   

 
                              Patent No：81011
                        
                              GPR-H SERIES

                              MSRP from $680
FEATURES：
0.01% High Regulation
Constant Voltage and Constant Current Operation
Internal Select for Continuous or Dynamic Load
Low Ripple and Noise
Overload and Reverse Polarity Protection
3 1/2 Digits 0.5" LED Display

Data Sheet
User Manual
 
    SPECIFICATIONS

     CONSTANT VOLTAGE
     OPERATION
Regulation
Line regulation < 0.01% + 3mV
Load regulation < 0.01% + 5mV ( < 10A)
                       < 0.02% + 5mV ( > 10A)
Ripple & Noise < 1mVrms 5Hz ~ 1MHz
Recovery Time < 100µS (50% Load change, Minimum load 0.5A)
Output Range 0 to rating voltage continuously adjustable
     CONSTANT CURRENT
     OPERATION		 Regulation Line regulation < 0.2% + 3mA
Load regulation < 0.2% + 3mA
Ripple Current < 5mArms(<20A), < 20mArms(<50A)
Output Range 0 to rating amperes continuously adjustable
     METER Digital 3 1/2 digits 0.5" LED display
Accuracy + (0.5% of rdg + 2 digits)
     INSULATION Chassis and Terminal 100MΩ or above ( DC 1000V )
Chassis and AC Cord 100MΩ or above ( DC 1000V )
     POWER SOURCE AC 100V/120V/220V/240V+10%, 50/60Hz
     ACCESSORIES Instruction manual x 1,
Power cord x 1
Test lead GTL-105 x 1(<3A) or GTL-104 x 1(<10A) or Not Available >10A
     DIMENSIONS 255(W) x 145(H) x 420(D) mm

    

   SELECTION GUIDE
　 Model Output Volts (V) Output Amps (A)

Digital

 GPR-0830HD 0 ~ 8 0 ~ 30
GPR-1820HD 0 ~ 18 0 ~ 20
GPR-3510HD 0 ~ 35 0 ~ 10
GPR-6060D 0 ~ 60 0 ~ 6
GPR-7550D 0 ~ 75 0 ~ 5
GPR-11H30D 0 ~ 110 0 ~ 3
GPR-30H10D 0 ~ 300 0 ~ 1

CE APPROVED：GPR-1820HD, GPR-3510HD, GPR-7550D, GPR-11H30D

 

Programmable D.C. Power Supply                                                                                       

 

PST-Series

 
 MSRP from $970
FEATURES：
Digitized Programmable Interface, High Resolution 10mV、 1mA
192 * 128 LCD Display, Display Several Setting and Measuring Result Simultaneously (Variable Display Mode) 
Intelligent Windows Operating Interface
Support Several Directly Buttons
Provided Auto Series and Parallel Function
High Stability, Low Drift
Over-Voltage, Over-Current, Over-Temperature Protection
Intelligent Fan Control (Change by Output Power)
Built-in Buzzer Alarm
100 Sets Memory for Setting Save, Auto Running
Interface (Standard)：RS-232
Interface (Option)：GPIB (IEEE 488.2)

  Data Sheet
  User Manual
  Programmer Manual
 
     SPECIFICATIONS
 

MODEL

PST-3202

 PST-3201
      Output Voltage 0~32V x 2, 0~6V x 1 0~32V x 3
Current 0~2A x 2, 0~5A x 1 0~1A x 3
OVP 0~33V x 2, 0~7V x 1 0~ 33V x 3
      Load Effect Voltage
< 3mV
Current
< 3mA
      Source Effect Voltage
< 3mV
Current
< 3mA
      Resolution Voltage 10mV ( 20mV rating voltage > 36V )
Current 1mA ( 2mA rating current > 3.5A )
OVP 10mV ( 20mV rating voltage > 36V )
      Program Accuracy
      ( 25 + 5°C )		 Voltage < 0.05% + 20mV ( +40mV rating voltage > 36V )
Current < 0.1% + 5mA ( +10mV rating voltage > 3.0A )
OVP < 0.05% + 20mV ( +40mV rating voltage > 36V )
      Ripple & Noise
      ( 20Hz ~ 20MHz )		 Voltage Ripple：< 1mVrms / 3mVp-p
Noise：< 2mVrms / 30mVp-p
Current < 3mArms ( < 5mArms rating current > 3.5A )
      Temperature Voltage < 100ppm + 3mV
      Coefficient( 0 ~ 40°C ) Current < 100ppm + 3mA
      Read back Resolution Voltage 10mV ( 20mV rating voltage > 36V )
Current 1mA ( 2mA rating current > 3.5A )
      Read back Accuracy
      ( 25 + 5°C )		 Voltage < 0.05% + 10mV ( + 20mV rating voltage > 36V )
Current < 0.1% + 5mA
      Read back Temperature Voltage < 100ppm + 10mV ( + 20mV rating voltage > 36V )
      Coefficient Current < 150ppm + 10mA
      Response Time Voltage Up 10% ~ 90%：< 100mS
Voltage Down 90% ~ 10%：< 100mS
      Drift Voltage < 100ppm + 10mV ( + 20mV rating voltage > 36V )
Current < 150ppm + 10mA
      Track Operation
 Tracking Error < 0.1% + 20mV
Series
(Load Effect)		 < 20mV
      Parallel Operation
 Program Accuracy
( 25 + 5°C )		 Voltage：< 0.05% + 10mV ( + 20mV rating voltage > 36V )
Current：<  0.1% + 10mA
OVP：< 0.05% + 10mV
      Memory
 Store/Recall Points 0 ~ 99
      Timer
 Setting Time 0.1sec ~ 99Min59sec (max. 99Min59sec x 100)
Resolution 0.1sec
Function Auto Step running (for output working loop)
      Interface (Standard) RS-232
      Interface (Option) GPIB (IEEE 488.2)
      Power Source AC 100V/120V/220V/240V+10%, 50/60Hz
      Accessories Power cord x 1,
Instruction manual x 1,
Test Lead x 3 sets
      Dimensions & Weight 230(W) x 140(H) x 380(D) mm, Approx. 10 kg

     

Programmable Switching D.C. Power Supply                                                     

 
                      
                         PSS-2005/PSS-3203

                                 MSRP $525
FEATURES：
Digitized Programmable Interface, High Resolution 10mV、 1mA
High Stability, Low Drift
Over-Voltage, Over-Current, Over-Temperature Protection
Intelligent Fan Control (Change by Output Power)
Built-in Buzzer Alarm
Interface (Standa)：RS-232
Interface (Option)：GPIB (IEEE 488.2)
Data Sheet
User Manual
Programmer Manual
 
    SPECIFICATIONS
 

MODEL
PSS-2005
PSS-3203 
     Output Voltage 0~20V x 1 0~32V x1
Current 0~ 5A x 1 0~3A x 1
OVP 0~21V x 1 0~33V x 1
     Load Effect Voltage
< 3mV
Current
< 3mA
     Source Effect Voltage
< 3mV
Current
< 3mA
     Resolution Voltage 10mV
Current 1mA ( 2mA rating current > 3.5A )
OVP 10mV
     Program Accuracy ( 25 + 5°C ) Voltage < 0.05% + 10mV
Current < 0.1% + 5mA
OVP < 0.05% + 10mV
     Ripple & Noise ( 20Hz ~ 20MHz ) Voltage Ripple：< 1mVrms / 3mVp-p
Noise：< 2mVrms / 30mVp-p
Current < 3mArms ( < 5mArms rating current > 3.5A )
     Temperature Voltage < 100ppm + 3mV
     Coefficient( 0 ~ 40°C ) Current < 100ppm + 3mA
     Readback Resolution Voltage 10mV
Current 1mA ( 2mA rating current > 3.5A )
     Readback Accuracy ( 25 + 5°C ) Voltage < 0.05% + 10mV
Current < 0.1% + 5mA
     Readback Temperature Voltage < 100ppm + 10mV
     Coefficient Current < 150ppm + 10mA
     Response Time Voltage Up 10% ~ 90%：< 100mS
Voltage Down 90% ~ 10%：< 100mS
     Drift Voltage < 100ppm + 10mV
Current < 150ppm + 10mA
     Interface (Standard) RS-232 *
     Interface (Option) GPIB (IEEE 488.2) *
     Power Source AC 100V/120V/220V/240V+10%, 50/60Hz
     Accessories Power cord x 1,
Instruction manual x 1,
Test Lead x 1 set
     Dimensions & Weight 108(W) x 140(H) x 315(D) mm, Approx. 4.8 kg

     * Unable to install RS-232 & GPIB simultaneously

 

  

PSH-Series

MSRP from $720
FEATURES：
Wide Input Range and High Power Factor (P.F)
High Efficiency and High Power Density
Constant Voltage and Constant Current Operation
Over-Voltage, Over-Current and Over-Heat Protection
Low Ripple and Noise
Option : GPIB (IEEE-488.2) & RS-232
Output ON / OFF Control
Self-Test and Software Calibration
LCD Display
Built-in Buzzer alarm
(Note: GPIB and RS-232C cannot be installed simultaneously)

Data Sheet
User Manual
Programmer Manual
 
    SPECIFICATIONS

     Output
10V
36A (PSH-1036)
70A (PSH-1070)
100A (PSH-10100)
20V 18A (PSH-2018) 35A (PSH-2035) 50A (PSH-2050)
36V 10A (PSH-3610) 20A (PSH-3620) 30A (PSH-3630)
60V 6A (PSH-6006) 12A (PSH-6012) 18A (PSH-6018)
     Regulation (CV) Load 0.1% + 5mV 0.1% + 5mV 0.1% + 5mV
Line 0.05% + 5mV 0.05% + 5mV 0.05% + 5mV
     Regulation (CC) Load 0.2% + 5mA 0.2% + 10mA 0.2% + 15mA
Line 0.2% + 5mA 0.2% + 10mA 0.2% + 15mA
     Ripple & Noise Voltage (mVrms) 10 ~ 20mV 10 ~ 20mV 10 ~ 20mV
Current (mArms) 0.2% 0.2% + 20mA 0.2% + 40mA
     Resolution Voltage < 36V 10mV 10mV 10mV
Voltage > 36V 20mV 20mV 20mV
Current 10V 10mA 20mA 30mA
Current 20V 10mA 10mA 20mA
Current 36V 10mA 10mA 10mA
Current 60V 10mA 10mA 10mA
     Program Accuracy Voltage < 36V 0.05% + 25mV 0.05% + 25mV 0.05% + 25mV
Voltage > 36V 0.05% + 50mV 0.05% + 50mV 0.05% + 50mV
Current 10V 0.2% + 30mA 0.2% + 60mA 0.2% + 90mA
Currnet 20V 0.2% + 30mA 0.2% + 30mA 0.2% + 60mA
Current 36V 0.2% + 30mA 0.2% + 30mA 0.2% + 30mA
Current 60V 0.2% + 30mA 0.2% + 30mA 0.2% + 30mA
     Readback (METER)
     Resolution		 Voltage As Resolution As Resolution As Resolution
Current As Resolution As Resolution As Resolution
     Readback (METER)
     Accuracy		 Voltage As Program Accuracy As Program Accuracy As Program Accuracy
Current As Program Accuracy As Program Accuracy As Program Accuracy
     Readback Temp.
     Coefficient		 Voltage
(25 + 5°C )		 < 100ppm/°C  < 100ppm/°C  < 100ppm/°C 
     Response (Rise/Fall)
     Time		 Voltage Up < 150mS < 150mS < 150mS
Voltage Down < 150mS < 150mS < 150mS
     Recovery Time CV Mode < 500µS < 500µS < 500µS
     Protection OVP/OCP/OHP ˇ ˇ ˇ
Rush Current ˇ ˇ ˇ
     Output On/Off Control   ˇ ˇ ˇ
     Display LCD
     Power Source AC 85V ~ 250V, 50/60Hz
     Accessories Power cord x 1,
Instruction Manual x 1
     Dimensions & Weight  

108(W) x 141(H) x 388(D)mm, 3.3kg

 188(W) x 141(H) x 388(D)mm, 6.2kg 268(W) x 141(H) x 388(D)mm, 9.3kg

Programmable D.C. Electronic Load                                                                         

Patent No：81011/81324
   


                                     PEL- 300

                                    MSRP $1265
 
FEATURES：
 
Operating Voltage DC 3 ~ 60V
Operating Current 6mA ~ 60A
Operating 1 ~ 300W
Easy Operation, with UP/DOWN Key
High Resolution：20mV, 0.2mA, 0.33mW
Over Voltage, Over Current, Over Power Protection
Memory Store and Recall 100 Points
Max. Power：300W
Operation Mode：Constant Voltage mode, Constant Current mode
    Constant Resistance mode
Transient Generator Frequency
    Frequency Range：1Hz ~ 1kHz；Duty Range：10% ~ 90%
Self-Test and Software Calibration
Meet UL, CSA, IEC Safety Regulation
  Data Sheet
  User Manual
 
    SPECIFICATIONS

     RATING
Operating Voltage
DC 3 ~ 60V
                    Current 6mA ~ 60A
                    Power 1 ~ 300W
  Minimum Operation 3V
     CV MODE Operating Range 3 ~ 60V
  Setting Accuracy + (0.1% + 40mV)
  Setting Resolution 20mV
     CC MODE Operating Range 6mA ~ 60A
  Setting Accuracy 6.02A ~ 60A Range + (0.5% + 100mA)
    0.602A ~ 6A Range + (0.1% + 10mA)
    6mA ~ 0.6A Range + (0.1% + 1mA)
  Setting Resolution 6.02A ~ 60A Range 20mA
    0.602A ~ 6A Range 2mA
    6mA ~ 0.6A Range 0.2mA
     CR MODE Operating Range 50mW ~ 1kW
  Setting Accuracy 100.33W ~ 1kW  + (5% + 1W)
    10.033W ~ 100W + (5% + 100mW)
    1.0033W ~ 10W + (5% + 1mW)
    50mW ~ 1W + (5% + 1mW)
  Setting Resolution 100.33W ~ 1kW   330mW
    10.033W ~ 100W   33mW
    1.0033W ~ 10W   3.3mW
    50mW ~ 1W   0.33mW
     DYNAMIC OPERATION Frequency Range 1Hz ~ 1kHz
     CC MODE ONLY Resistance Range 105Hz  ~ 1kHz Range 5Hz
    10.5Hz  ~ 100Hz Range 0.5Hz
    1Hz  ~ 10Hz Range 0.05Hz
  Duty Range 10% ~ 90%
  Resolution 1%
     VOLTAGE READBACK Accuracy + (0.1% + 60mV)
  Resolution 20mV
     CURRENT READBACK Accuracy 6.02A ~ 60A Range + (0.5% + 100mA)
    0.602A ~ 6A Range + (0.1% + 10mA)
    6mA ~ 0.6A Range + (0.1% + 1mA)
  Resolution 6.02A ~ 60A Range 20mA
    0.602A ~ 6A Range 2mA
    6mA ~ 0.6A Range 0.2mA
     MEMORY Store/Recall Points 0 ~ 99
     TIMER Range 1sec ~ 999min 59sec
  Resolution 1sec
  Function for load on
     POWER SOURCE AC 100V/120V/220V/240V+10%, 50/60Hz
     ACCESSORIES Instruction manual x 1,
Power cord x 1
     DIMENSIONS & WEIGHT 255(W) x 145(H) x 346(D) mm, Approx. 9kg



 

Phone: 813-971-5001
Fax : 813-971-5117

Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Toll Free
1-800-783-6664

email sales@omnicontrols.com
Sales@Omnicontrols.com

We guarantee a 24 hour response on all inquiries made via email.
For quicker response please call Omni Controls
at any of the above numbers

 


Please Note: All prices subject to change without notice
copyright©omnicontrols.com - All Rights Reserved.
Terms and Conditions for Omni Controls Inc - online. Legal Disclaimer
Supplementary Information and Cover Art Copyright omnicontrols.com. All rights reserved.

copyright © omnicontrols 2005
Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Email: sales@omnicontrols.com

Phone: 800-783-6664
Fax: 813-971-5117