GDS-820/840 Series Digital Storage Oscilloscope                                       

GDS-820/840 Series 
FEATURES
150MHz/250MHz Bandwidth with either Color or Monochrome LCD Display
125k Long Memory and 12 Division Horizontal Display
25Gsa/s Sampling Rate for Repetitive Waveforms 
15 Auto Measurement Functions to get quick and accurate results
Advance Trigger: Pulse Width, TV-Line, Event Delay and Time Delay
GO-No Go, Learn Mode and Auto Setup Sequence
FFT Function
Standard Interface: USB, RS232, Printer Port, Option: GPIB Interface

                       MSRP from $1095
DOWNLOAD YOUR FREE SOFTWARE HERE!!!
 Data Sheet
 User Manual
 Programmer Manual
 
      SPECIFICATIONS

   
      Display System

 
      Display Device

GDS-820

GDS-820S

GDS-820C

GDS-840S

GDS-840C
Mono (320*240)
5.7" LCD		 Mono (320*240)
5.7" LCD		 Color (320*240)
5.7" LCD		 Mono (320*240)
5.7" LCD		 Color
(320*240)
5.7" LCD
      Display Contrast
Adjustable
      Waveform Display Graticule
8 x 10 divisions (8 x 12 div, when menu off)
      Display Mode
Dot, Vector, Accumulate

      Vertical System

  
      Bandwidth (-3dB)

GDS-820

GDS-820S

GDS-820C

GDS-840S

GDS-840C
DC~150MHz
DC~150MHz
DC~150MHz
DC~250MHz
DC~250MHz
      Channels
2
      Resolution
8 bit
      Sensitivity
2mV / DIV ~ 5V / DIV
      Accuracy
+3%
      Rise Time

GDS-820

GDS-820S

GDS-820C

GDS-840S

GDS-840C
<2.3ns
<2.3ns
<2.3ns
<1.4ns
<1.4ns
      Input Coupling
AC, DC, GND
      Input Impedance
1MΩ + 2%, ~ 22pF
      Polarity
Positive& Negative
      Maximum Voltage Between   
      Signal and Common at input
      BNC
300V (DC + AC peak), CAT II
      Waveform Signal Process
CH1-CH2, CH1+CH2, FFT
      Offset Range
2mV/div ~ 50mV/div: ±0.5V ; 100mV/div ~ 500mV/div: ±5V ; 1V/div ~ 5V/div: ±50V
      Bandwidth Limit
20MHz (-3dB)

      Horizontal System

  
      Range
1nS/DIV ~10S / DIV ; Roll: 250mS/DIV ~ 10S/DIV (1-2-5 increments)
      Modes
MAIN, WINDOW, WINDOW ZOOM, ROLL, X-Y
      Accuracy
+0.01%
      Delay Range
Pre-trigger : 20 DIV, Post-trigger : 1000 DIV

      Signal Acquisition System
      Real-time Sample Rate
100MSa/s maximum on each channel
      Equivalent Sample Rate
25GSa/s maximum on each channel
      Record Length
125k / CH
      Peak Detection
10nS (500nS/DIV ~ 10S/DIV)
      Acquisition Mode
Sample, Peak Detect, Average
      Average
2, 4, 8, 16, 32, 64, 128, 256

      Trigger System

  
      Source
CH1, CH2, LINE, EXT
      Modes
AUTO-LEVEL, AUTO, NORMAL, SINGLE, TV, TIME DELAY, /EVENT DELAY, EDGE, PULSE WIDTH
      Coupling
AC, DC, LF rej, HF rej, Noise rej
      Sensitivity

GDS-820

GDS-820S

GDS-820C

GDS-840S

GDS-840C
DC ~ 25MHz : approx. 0.35 DIV or 3.5mV ;
25MHz ~ 100MHz : approx. 1.5 DIV or 15mV
DC ~ 25MHz : approx. 0.35 DIV or 3.5mV ;
25MHz ~ 250MHz : approx. 1.5 DIV or 10mV

      External Trigger

  
      Range
+15V
      Sensitivity

GDS-820

GDS-820S

GDS-820C

GDS-840S

GDS-840C
DC ~ 30MHz : approx. 50mV ;
30MHz ~ 100MHz : approx. 100mV
DC ~ 30MHz : approx. 50mV ;
30MHz ~ 100MHz : approx. 100mV;
150MHz 100MHz ~ 250MHz : approx. 150mV
      Input Impedance

1MΩ + 2%, ~ 22pF
      Maximum Input

300V (DC + AC peak), CAT II

      X-Y Mode

  
      X-Axis Input / Y-Axis Input

Channel 1 (CH1) / Channel 2 (CH2)
      Phase Shift

+3° at 100kHz

      Cursor & Measurement

  
      Automated Voltage  
      Measurement
Vhi, Vlo, Vmax, Vmin, Vpp, Vavg, Vrms, Vamp
      Automated Time
      Measurement
Rise Time, Fall Time, Duty Cycle, Frequency, Period, Positive Width, Negative Width
      Cursor Measurement
Voltage difference between cursors (ΔV)
time difference between cursors (ΔT)
Frequency difference between cursors (1/ΔT)

      Frequency Counter

  
      Readout Resolution
6 digits
      Range
AC Coupled, 10Hz minimum to rated bandwidth
      Signal Source
All available trigger source except the Pulse Width & Video Trigger mode
      Control Panel Functions  
      Autoset
"Autoset" adjust vertical (volt/DIV), horizontal (sec/DIV), and trigger level automatically
      Save/Recall
Up to 15 sets of measurement conditions can be saved and recalled
      Waveform Trace Save/Recall
2 sets of waveform can be saved and recalled
     Interface    
      USB Interface

GDS-820

GDS-820S

GDS-820C

GDS-840S

GDS-840C
NA
STD.
STD.
STD.
STD.
      RS-232 Interface
NA
STD.
STD.
STD.
STD.
      Printer port
NA
STD.
STD.
STD.
STD.
      Go-No Go Output
NA
STD.
STD.
STD.
STD.
      GPIB Interface
NA
OPT.
OPT.
OPT.
OPT.
      Power Source    
      Line Voltage Range
100V ~ 240V AC, automatic selection
      Line Frequency
48Hz ~ 63Hz
      Power Consumption
85Watts, 95VA maximum, with fan
      Accessories
Power cord x 1 ;
Instruction manual x 1 ;
GDS-820 Series: GTP-150A Probes(10:1/1:1) x 2
GDS-840 Series: GTP-250A Probes(10:1/1:1) x 2
      Dimensions & Weight

254(W) x 142(H) x 310(D) mm, Approx. 4.1kg
GDS-806C Digital Storage Oscilloscope
 


GDS-806C
               front view

 

 

 

             
                   rear view  

                 Click Image to Enlarge

                               MSRP $755

  • 60MHz Bandwidth With  COLOR  Display
     

  • 125k Memory and 12 Division Horizontal Display
     

  • 25GS/s Sampling Rate for Repetitive Waveforms
     

  • Advanced Trigger : Pulse Width , TV Line, Event Delay and Time Delay
     

  • Go/NoGo , Auto Setup Sequence and TTF Function
     

  • Built-In Help Menu, Multi-Language and  FREE PC Software
     

  • Standard Interface: RS-232C
     

  • Optional Interface: GPIB, Printer Port and USB 2.0

                      

  Datasheet  User Manual Programmer Manual

 

Specifications

Applications

Options

Software

      
           
     Display System     Display Device   Color (320 x 240)    
      Display Contrast   Adjustable    
      Waveform Display  Graticule 8 x 10 divisions (8 x 12 when menu off)  
 
     Vertical System     Bandwidth   60MHz    
      Channels      2    
      Vertical Resolution   8-bit    
      Vertical Sensitivity   2mV/div ~ 5V/div    
      Vertical Accuracy   ±3%    
      Rise Time   <5.8ns    
      Input Coupling   AC , DC , Ground    
      Input Impedance   1MΩ ± 2% , ~18pF    
      Polarity   Normal and Invert    
      Max. Voltage Between Signal & 300V ( DC+AC peak ) , CATII    
      common at Input BNC        
      Waveform Signal Process CH1 + CH2 , CH1 - CH2 , FFT  
      Offset Range   2mV/div~50mV/div : ± 0.5V; 100mV/div~500mV/div : 1V/div~5V/div : ±50V
      BW Limit   20MHz ( -3dB )    
     Horizontal System     Time Base Range   1ns/div ~ 10s/div ( 1-2-5 increments ), Roll : 250ms/div ~ 10s/div
      Time Base Mode   Main , Window , Window Zoom , Roll , X-Y  
      Time Base Accuracy   ± 0.01%    
      Delay Range   Pre-trigger : 20 div  
     Signal Acquisition     Real-Time Sample Rate 100MS/s maximum on each channel  
     System     Equivalent Sample Rate   25GS/s E.T. maximum on each channel  
      Record Length   125h/CH    
      Peak Detection   10ns (500ns/div ~ 10s/div)  
      Acquisition Mode Sample , Peak Detect , Average  
      Average   2 , 4 , 8 , 16 , 32 , 64 , 128 , 256  
     Trigger     Trigger Source   CH1 , CH2 , Line , Ext  
      Mode   Auto Level , Auto , Normal , Single , TV , Time Delay , Event Delay , Edge ,
        Pulse Width , AC , DC , HF , LF , Noise Reject
      Coupling   AC , DC , HF , LF , Noise Reject  
      Sensitivity   DC ~ 25MHz : Approximate 0.5div or 5mV
      25MHz ~ 60MHz : Approximate 1.5div or 15mV  
     X - Y Mode     X-Axis Input / Y-Axis Input Channel 1 / Channel 2
      Phase Shift   ± 3° at 100 kHz    
     Cursor and     Auto Voltage Measurement Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin
     Measurement     Auto Time Measurement Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width,
      Duty Cycle
      Cursor Measurement   Voltage difference between cursors (∆V), Time difference between
      cursors (∆T), Frequency difference between cursors (1/∆T)
     Frequency Counter     Readout Resolution   6 digits    
      Frequency Range   AC Coupled , 20Hz~rated bandwidth ; resolution: 10Hz
      Signal Source   All available trigger source except the Pulse Width & Video Trigger mode  
     Adjustable Probe     Frequency Rang   1 kHz ~ 100 kHz   1KHz / STEP  
     Calibration Signal     Duty Cycle   5% ~ 95%    5% / STEP  
     External Trigger     Range       ± 15V    
      Sensitivity   DC ~ 25MHz : ~ 50mV ; 25 ~ 60MHz : ~ 100mV
      Input Impedance   1MΩ ± 2%, ~ 18pF  
      Maximum Input   300V ( DC + AC peak ) , CATII  
    Control Panel Function     AutoSet   "Autoset" can adjust vertical ( Volt/div ), Horizontal ( Sec/div) and Trigger  
       level automatically  
      Save/Recall   Up to 15 sets of measurement conditions can be saved and recalled  
      Waveform Trace Save/Recall 2 sets of waveform can be saved and recalled  
 
     Interface     Standard   RS-232C      
      Optional Opt. 01   GPIB Interface      
      Optional Opt. 11   USB, Printer Port, Go/NoGo Output  
 
     Power Source     100V ~ 240V  AC  47Hz ~ 63Hz , Auto selection  
 
     Accessories     Instruction Manual x 1 , Power Cord x 1 , Probe x 2  
 
     Dimensions and Weights   310W x 142H x 254D (mm) , Approximate 4.1 kg

Cursor Readout Analog Oscilloscope                                                                               


                        

GOS-6200

 MSRP $1950

 FEATURES：
200 MHz, Dual Channel, Delayed Sweep
Built-in 6 Digit Universal Counter
Auto Set
TV-Line Selection (NTSC, PAL, SECAM)
10 Sets Memory for SAVE & RECALL of Front Panel Setting
Cursor Readout with 7 Measurements
Panel Setup Lock of Digital-Control Functions
Buzzer Alarm
LED Indicators
Trigger Signal Output
Z-Axis Modulation Input
SMD Technology, High Stability and Reliability
  Data Sheet
  User Manual
 
    SPECIFICATIONS


     CRT
Type


6-inch rectangular type with internal graticule;
0%, 10%, 90% and 100% markers. 8 x 10 DIV (1 DIV=1 cm)
Phosphor P31
Accelerating Potential 14 kV approx.
Illumination Continuously adjustable
Z-axis input Coupling : DC
Sensitivity : 5V or more
Maximum input voltage : 30V (DC+AC peak) at 1kHz or less
Bandwidth : DC ~ 5MHz

     VERTICAL SYSTEM

 Sensitivity 2mV ~ 5V/DIV,11 step in 1-2-5 sequence
Sensitivity Accuracy < 3% (5 DIV at the center of display)
Vernier Vertical Sensitivity Continuously variable to 1/2.5 or less panel-indicate value
Bandwidth(-3dB) DC ~ 200MHz (2mV/DIV : DC ~ 20MHz)
Rise Time 1.75nS (2mV/DIV : 17.5 nS)
Signal Delay Leading edge can be monitored
Max. Input Voltage 400V (DC+AC peak) at 1kHz or less
Input Coupling AC, DC, GND
Input Impedance 1MΩ+2%// approx. 25pF
Vertical Mode CH1, CH2, DUAL (CHOP/ALT), ADD, CH2 INV.
Bandwidth Limited 20MHz
Common-Mode Rejection Ratio 50 :1 or better at 50kHz
Dynamic Range 8 div at 100MHz；5 div at 200MHz

     HORIZONTAL SYSTEM

 Horizontal Modes MAIN(A), ALT, DELAY(B)
A(main)Sweep Time 20nS ~ 0.5S / DIV, continuously variable (UNCAL)
B(delay)Sweep Time 20nS ~ 50mS/DIV
Accuracy + 3% (+ 5% at x 10 MAG)
Sweep Magnification x 10 (maximum sweep time 2nS / DIV)
Hold Off Time Variable
Delay Time 1µS ~ 5S
Delay Jitter Better than 1:20000
Alternate Separation Variable

     TRIGGER

 Trigger Modes AUTO, NORM, TV
Trigger Source CH1, CH2, LINE, EXT, EXT/10
Trigger Coupling AC, DC, HFR, LFR, NR
Trigger Slope "+" or   "-" polarity or TV sync polarity
Trigger Sensitivity
Mode
Frequency
INT
EXT
EXT/10
AUTO
10Hz~20MHz
0.35 DIV
50 mV
500 mV
20MHz~200MHz
1.5 DIV
150 mV
1.5 V
NORM
DC~20MHz
0.35 DIV
50 mV
500 mV
20MHz~200MHz
1.5 DIV
150 mV
1.5 V
TV
sync signal
1 DIV
200 mVpp
2 Vpp
Trigger Level Range INT :±4DIV or more；EXT :±0.4V or more；EXT/10 :±4V or more
TV Triggering Mode : TV-V, TV-H, TV-LINE
TV-Line Selection

Standard

Filed 1

Filed 2

NTSC (525H)

1H~263H

1H~262H

PAL (625H)

1H~313H

1H~312H

SECAM (625H)

1H~313H

1H~312H
Max. External Input Voltage

400V (DC+AC peak) at 1kHz
External Input Impedance

1MΩ + 5%, // approx. 25pF

     X-Y OPERATION

 Mode X-axis : selectable CH1, EXT, EXT/10
Y-axis : selectable CH1, CH2, CH1 and CH2
Sensitivity Accuracy 2mV ~ 5V / DIV ±3%； EXT : 0.1V / DIV±5%； EXT / 10 :1V / DIV±5%
X-axis Bandwidth DC ~ 500kHz (-3dB)
Phase Error 3º or less from DC ~ 50kHz

     OUTPUT SIGNAL

 Trigger Signal Output Voltage : approx. 25mV/DIV into 50Ω
Frequency response : DC ~ 10MHz
Calibrator Output 1kHz Squarewave, 2Vpp±2%

     CURSOR READOUT
     FUNCTION

 Cursor Measurement Function ΔV，ΔV%，ΔVdB，ΔT，1/ΔT，ΔT%，Δθ
Cursor Resolution 1 / 100 DIV
Effective Cursor Range Vertical : ±3DIV ; Horizontal : ±4DIV
Panel Setting Display Vertical : V/DIV(CH1,CH2), UNCAL, ALT/CHOP/ADD, INV, probe factor, AC/DC/GND
Horizontal : S/DIV(MTB,DTB), UNCAL, x 10MAG, delay time, HO
Trigger : source, coupling, slope, level, TV-V, TV-H
Others : X-Y, lock, save/recall MEM 0-9

     AUTO MEASUREMENT
     FUNCTION

 Parameter Function FREQ, PERIOD, ±WIDTH, ±DUTY ( + or - polarity selected by trigger slope)
Display Digits Max. 6-digits, decimal
Frequency Range 50Hz ~ 200MHz
Accuracy 1kHz ~ 200MHz : +0.01%；50Hz ~ 1kHz : +0.05%
Measuring Sensitivity >2 div (Measuring source selected from CH1 and CH2 as synchronous signal sources)

     SPECIAL FUNCTION

 Auto Set Input Channel : CH1, CH2；Frequency Response 50Hz~50MHz
Panel Setting Save & Recall 10 sets
Panel Setups Lock Provided
     POWER SOURCE AC 100V / 120V / 230V + 10%, 50 / 60Hz
     ACCESSORIES Power cord x 1;
Instruction manual x 1;
Probes(10:1/1:1) x 2
     DIMENSIONS & WEIGHT 310(W) x 150(H) x 470(D) mm；Approx. 9kg

Cursor Readout Analog Oscilloscope                                                                              Back to index


                

                      GOS-6112/6103/6103C
             (GOS-6103C Without CE Approved.)

                     MSRP   GOS-6103    $1250
                     MSRP   GOS-6103C  $1295
                     MSRP   GOS-6112     $1150

 FEATURES：
100 MHz, Dual Channel, Delayed Sweep
Built-in 6 Digit Universal Counter (GOS-6103C)
10 Sets Memory for Front Panel Setting Save & Recall (GOS-6103/GOS-6103C)
Time Base Auto-range (GOS-6103/GOS-6103C)
Cursor Readout with 7 Measurements
Panel Setup Lock of Digital-Control Functions
Buzzer Alarm
LED Indicators
TV Synchronization
Trigger Signal Output
Z-Axis Modulation Input
SMD Technology, High Stability and Reliability

Data Sheet
User Manual for GOS-6103C
User Manual for GOS-6112
 
    SPECIFICATIONS


     CRT
Type


6-inch rectangular type with internal graticule;
0%, 10%, 90% and 100% markers. 8 x 10 DIV (1 DIV=1 cm)
Phosphor P31
Accelerating Potential 16 kV approx.(GOS-6103/GOS-6103C), 12kV approx.(GOS-6112)
Illumination Continuously adjustable (GOS-6103/GOS-6103C)
Z-axis input Coupling : DC
Sensitivity : 5V or more
Maximum input voltage : 30V(DC+AC peak) at 1kHz or less
Bandwidth : DC ~ 5MHz

     VERTICAL SYSTEM

 Sensitivity 2mV ~ 5V / DIV,11 step in 1-2-5 sequence
Sensitivity Accuracy < 3% (5 DIV at the center of display)
Vernier Vertical Sensitivity Continuously variable to 1 / 2.5 or less panel-indicate value
Bandwidth(-3dB) DC ~ 100MHz (2mV/DIV : DC ~ 20MHz)
Rise Time 3.5nS (2mV/DIV : 17.5 nS)
Signal Delay Leading edge can be monitored
Max. Input Voltage 400V (DC+AC peak) at 1kHz or less
Input Coupling AC, DC, GND
Input Impedance 1MΩ+2%// approx. 25pF
Vertical Mode CH1, CH2, DUAL (CHOP/ALT), ADD, CH2 INV.
Bandwidth Limited 20MHz
Common-Mode Rejection Ratio 50 :1 or better at 50kHz
Dynamic Range 8 div at 60MHz；5 div at 100MHz (GOS-6112)
8 div at 100MHz (GOS-6103/GOS-6103C)

     HORIZONTAL SYSTEM

 Horizontal Modes MAIN (A), ALT, DELAY (B)
A(main)Sweep Time 50nS ~ 0.5S / DIV, continuously variable (UNCAL)
B(delay)Sweep Time 50nS ~ 50mS / DIV
Accuracy + 3% (+ 5% at x 10 MAG)
Sweep Magnification x 10 (maximum sweep time 5nS / DIV)
Hold Off Time Variable
Delay Time 1µS ~ 5S
Delay Jitter Better than 1:20000
Alternate Separation Variable

     TRIGGER

 Trigger Modes AUTO, NORM, TV
Trigger Source CH1, CH2, LINE, EXT
Trigger Coupling AC, DC, HFR, LFR
Trigger Slope "+" or   "-" polarity or TV sync polarity
Trigger Sensitivity

Mode

Frequency

INT

EXT

AUTO

10Hz~20MHz

 0.35 DIV

50 mV

20MHz~100MHz
1.5 DIV

150 mV

NORM

DC~20MHz

0.35 DIV

50 mV

20MHz~100MHz

1.5 DIV

150 mV

TV

sync signal

1 DIV

200 mVpp
TV Sync TV-V, TV-H
Max. External Input Voltage

400V (DC+AC peak) at 1kHz
External Input Impedance

1MΩ + 5%, // approx. 25pF

     X-Y OPERATION

 Mode X-axis :selectable CH1, CH2, EXT
Y-axis :selectable CH1, CH2, CH1 and CH2
Sensitivity Accuracy 2mV ~ 5V/DIV+3%; EXT : 0.1V/DIV+ 5%
X-axis Bandwidth DC ~ 500kHz (-3dB)
Phase Error 3º or less from DC ~ 50kHz

     OUTPUT SIGNAL

 Trigger Signal Output Voltage : approx. 25mV/DIV into 50Ω
Frequency response : DC ~ 10MHz
Calibrator Output 1kHz Squarewave, 2Vpp+2%

     CURSOR READOUT
     FUNCTION

 Cursor Measurement Function ΔV，ΔV%，ΔVdB，ΔT，1/ΔT，ΔT%，Δθ
Cursor Resolution 1 / 100 DIV
Effective Cursor Range Vertical : + 3DIV ; Horizontal : + 4DIV
Panel Setting Display Vertical : V/DIV(CH1,CH2), UNCAL, ALT/CHOP/ADD, INV, probe factor, AC/DC/GND
Horizontal : S / DIV(MTB,DTB), UNCAL, x 10MAG, delay time, HO
Trigger : source, coupling, slope, level, TV-V, TV-H
Others : X-Y, lock, save/recall MEM 0-9(GOS-6103/GOS-6103C)

     AUTO MEASUREMENT
     FUNCTION (GOS-6103C)

 Parameter Function FREQ, PERIOD, +WIDTH, +DUTY ( + or - polarity selected by trigger slope)
Display Digits Max. 6-digits, decimal
Frequency Range 50Hz ~ 100MHz
Accuracy 1kHz ~ 100MHz : +0.01%；50Hz ~ 1kHz : +0.05%
Measuring Sensitivity >2 div (Measuring source selected from CH1 and CH2 as synchronous signal sources)

     SPECIAL FUNCTION

 TIME/DIV Auto Range Provided (GOS-6103/GOS-6103C)
Panel Setting Save & Recall 10 sets (GOS-6103/GOS-6103C)
Panel Setups Lock Provided
     POWER SOURCE AC 100V / 120V / 230V + 10%, 50 / 60Hz
     ACCESSORIES Power cord x1,
Instruction manual x1,
Probes(10:1/1:1)x2
     DIMENSIONS & WEIGHT 310(W) x 150(H) x 455(D) mm；Approx. 9kg

Generation Analog Oscilloscope                                                                                           
 

nce.jpg (1984 bytes)


New GOS-6000 Series 

 FEATURES：
yball.gif (937 bytes) 2 Channels, 4 Traces：
    DC ~ 30MHz (GOS-6030/6031)
    DC ~ 50MHz (GOS-6050/6051)
yball.gif (937 bytes) 1mV/DIV ~ 20V/DIV
yball.gif (937 bytes) CRT Readout
yball.gif (937 bytes) Cursor Measurement, 6 Digit Frequency Counter, 10 Sets Memory for Front Panel
    Setting Save & Recall (GOS-6031/6051)
yball.gif (937 bytes) ALT MAG Function (x5, x10, x20)
yball.gif (937 bytes) Vertical Mode Triggering
yball.gif (937 bytes) TV Synchronization
yball.gif (937 bytes) CH1 Signal Output, Z-axis Input
yball.gif (937 bytes) Buzzer Alarm & LED Indicators
yball.gif (937 bytes) Compact size (275W x 130H x 370D mm) and Front Panel Layout Groups for   
    easy to use
Data Sheet
User Manual
 
    SPECIFICATIONS


     CRT
Type


6-inch rectangular type with internal graticule; 0%, 10%, 90% and 100% markers. 8 x 10 DIV (1 DIV=1 cm)
Accelerating Potential GOS-6051/6050 approx.10kV
GOS-6031/6030 approx.2kV
INTEN and FOCUS Front panel control
Illumination Provided (GOS-6031/6051)
Trace Rotation Provided
Z-axis input Sensitivity: at least 5V
Polarity: positive going input decrease intensity
Usable frequency range: DC to 2MHz
Maximum input voltage: 30V (DC+AC peak) at 1kHz or less
GOS-6051/6050 Input impedance: approx. 33kΩ
GOS-6031/6030 Input impedance: approx. 47kΩ

     VERTICAL SYSTEM

 Sensitivity and Accuracy 1mV ~ 2mV/DIV + 5%, 5mV ~ 20V/DIV + 3%, 14 calibrated steps in 1-2-5 sequence
Vernier Vertical Sensitivity Continuously variable to 1/2.5 or less panel indicate value
Bandwidth (-3dB) and Rise Time

 

 

Bandwidth(-3dB)

Rise Time

GOS-6051/6050

5mV ~ 20V/DIV

DC ~ 50MHz

Approx. 7nS

1mV ~ 2mV/DIV

DC ~ 7MHz

Approx. 50nS
GOS-6031/6030

5mV ~ 20V/DIV

DC ~ 30MHz

Approx. 11.67nS

1mV ~ 2mV/DIV

DC ~ 7MHz

Approx. 50nS
Maximum Input Voltage 400V (DC + AC peak) at 1kHz or less
Input Coupling AC, DC, GND
Input Impedance 1MΩ + 2% // approx. 25pF
Vertical Modes CH1, CH2, DUAL (CHOP, ALT), ADD, CH2 INV
CHOP Frequency Approx. 250kHz
Dynamic Range GOS-6031/6030:8 DIV at 20MHz, 6 DIV at 30MHz
GOS-6051/6050:8 DIV at 40MHz, 6 DIV at 50MHz

     HORIZONTAL SYSTEM

 Sweep Time 0.2µS/DIV ~ 0.5S/DIV, 20 steps selectable in 1-2-5 sequence, continuous variable control between steps at least 1：2.5
Accuracy + 3%, + 5% at x5, x10 MAG. + 8% at x20 MAG
Sweep Magnification x5, x10, x20 MAG
Maximum Sweep Time
(at MAG)		 GOD-6051/6050: 20nS/DIV (10nS/DIV are uncalibrated)
GOD-6031/6030: 100nS/DIV (10nS/DIV ~ 40nS/DIV are uncalibrated)
ALT-MAG Function Available

     TRIGGER

 Trigger Modes AUTO, NORM, TV
Trigger Source VERT-MODE, CH1, CH2, LINE, EXT
Trigger Coupling AC, HFR, LFR, TV-V(-), TV-H(-)
Trigger Slope "+" or   "-" polarity
Trigger Sensitivity

GOS-6051/6050

20Hz ~ 5MHz

5MHz ~ 40MHz

40MHz ~ 50MHz

GOS-6031/6030

20Hz ~ 2MHz

2MHz ~ 20MHz

20MHz ~ 30MHz
CH1, CH2
0.5 DIV
1.5 DIV
2.0 DIV
VERT-MODE
2.0 DIV
3.0 DIV
3.5 DIV
EXT
200mV
800mV
1V
TV sync pulse more than 1 DIV (CH1, CH2, VERT-MODE) or 200mV(EXT)
External Trigger Input Input Impedance：Approx. 1MΩ // 25pF (AC coupling)
Max. input voltage：400V (DC + AC peak) at 1kHz
Hold-off Time

Variable

     X-Y OPERATION

 Input X-axis：CH1；Y-axis：CH2
Sensitivity 1mV/DIV ~ 20V/DIV
Bandwidth X-axis：DC ~ 500kHz (-3dB)
Phase Difference 3º or less from DC to 50kHz

     OUTPUT SIGNAL
Trigger Signal Output Voltage： approx. 20mV/DIV (with 50Ω terminated)；
Bandwidth：50Hz to at least 5MHz
Calibrator Output Voltage：0.5V + 3%；Frequency：approx. 1kHz,  Square wave

     CURSOR READOUT

 Panel Setting Display CH1/CH2 sensitivity, sweep time, trigger condition
Panel Setting Save & Recall (GOS-6031/6051) 10 sets
Cursor Measurement
(GOS-6031/6051)		 Cursor measurement function：ΔV, ΔT, 1/ΔT
Cursor resolution：1/25 DIV；
Effective cursor range：vertial: + 3 DIV, horizontal: + 4 DIV
Frequency Counter
(GOS-6031/6051)		 Display digits：Max. 6-digits decimel
Frequency range：GOS-6051：50Hz ~ 50MHz；Accuracy：+ 0.01%
Frequency range：GOS-6031：50Hz ~ 30MHz；Accuracy：+ 0.01%
Measuring sensitivity：more than 2 DIV (measuring source selected from CH1 or CH2 as synchronous signal sources)
     POWER SOURCE AC 100V/120V/ 230V + 10%, 50/60Hz
     ACCESSORIES Power cord x 1, Instruction manual x 1, Probes(10:1/1:1) x 2
     DIMENSIONS & WEIGHT 275(W) x 130(H) x 370(D) mm, Approx. 7.2kg

50 MHz Oscilloscope                                                                                                                    


                        
                                   GOS-653G

                                     MSRP $790
FEATURES :
 
50 MHz, Dual Channel
Delayed Sweep
Built-in Delay Line
TV Synchronization
Z axis input
ALT Triggering Function
Hold off Function
Trigger level lock function
CH1 output

Data Sheet
User Manual
 
    SPECIFICATIONS


     CRT
Type


6-inch rectangular type with internal graticule;
0%, 10%, 90% and 100% markers. 8 x 10 DIV (1 DIV=1 cm)
Phosphor P31
Accelerating Potential 12 kV
Illumination Continuously adjustable
Z-axis input Input Impedance : Approx. 5kΩ
Sensitivity : Above 3Vp-p
Bandwidth : DC ~ 5MHz

     VERTICAL SYSTEM

 Sensitivity 5mV ~ 5V/DIV +3%, 1mV ~ 2mV/DIV +5%
Bandwidth DC ~ 50MHz
DC ~ 15MHz at 1mV ~ 2mV/DIV
Rise Time 7nS (23.3nS at 1mV ~ 2mV/DIV)
Signal Delay Leading edge can be monitored
Input Impedance Approx. 1MΩ
Input Coupling AC, DC, GND
Vertical Mode CH1, CH2, DUAL, CH2 INV, ADD.(Dual automatic switching ALT and CHOP)

     HORIZONTAL SYSTEM

 A (main) Sweep Time 0.1µS ~ 0.5S / DIV+3%,
100nS ~ 50mS / DIV+5% (x 10MAG),
10nS ~ 50nS/DIV+8% (x 10MAG)
B (delay) Sweep Time 0.1µS ~ 0.5mS / DIV+3%,
100nS ~ 50µS / DIV+5%(x 10MAG),
10nS ~ 50nS / DIV+8% (x 10MAG)
Delay Time 1µS ~ 5mS, +5%
Delay Time Jitter Better than 1:10000

     TRIGGER

 Trigger Mode AUTO, NORM, SINGLE
Trigger Source CH1, CH2, ALT, LINE, EXT
Trigger Coupling AC, DC, HR, REJ, TV
Trigger Slope "+" or   "-"

     X-Y OPERATION

 Sensitivity 5mV ~ 5V / DIV+ 4%
X-axis Bandwidth DC ~ 2MHz
Phase Error 3º or less from DC ~ 100kHz

     OUTPUT SIGNAL

 Trigger Signal Output Voltage : approx. 50mV / DIV into 50Ω
Calibrator Output 1kHz Squarewave, 2Vpp+2%
     POWER SOURCE AC 100V / 120V / 220V / 230V + 10%, 50 / 60Hz
     ACCESSORIES Power cord x 1;
Instruction manual x 1 ;
Probes(10:1/1:1)x2
     DIMENSIONS & WEIGHT 310(W) x 150(H) x 455(D) mm；Approx. 8.2kg

35MHz Oscilloscope                                                                                               


                    
                                  GOS-635G

                                   MSRP $495
FEATURES :
35 MHz, Dual Channel
High sensitivity 1mV/DIV
TV Synchronization
Z axis input
ALT Triggering Function
Hold Off Function
CH1 output

Data Sheet
 User Manual
 
    SPECIFICATIONS


     CRT
Type


6-inch rectangular type with internal graticule 8 x 10 DIV (1 DIV=1 cm)
Z-axis input Input Impedance : Approx. 5kΩ
Sensitivity : Above 3Vp-p
Bandwidth : DC ~ 5MHz

     VERTICAL SYSTEM

 Sensitivity 5mV ~ 5V / DIV +3%, 1mV ~ 2mV / DIV +5%
Bandwidth DC ~ 35MHz
DC ~ 10MHz at 1 ~ 2mV / DIV
Rise Time 10nS (35nS at 1mV ~ 2mV / DIV)
Input Impedance Approx. 1MΩ
Input Coupling AC, DC, GND
Vertical mode CH1, CH2, DUAL, ADD, CH2 INV
(Dual automatic switching ALT and CHOP)

     HORIZONTAL SYSTEM

 Sweep Time 0.1µS ~ 0.5S / DIV+3%；
100nS ~ 50mS / DIV+5% (x 10MAG)；
10nS ~ 50nS+8% (x 10MAG)

     TRIGGER

 Trigger Mode AUTO, NORM
Trigger Source CH1, CH2, ALT, LINE, EXT
Trigger Coupling AC, DC, HF, REJ, TV
Trigger Slope "+" or   "-"

     X-Y OPERATION

 Sensitivity 5mV ~ 5V / DIV+4%
X - axis Bandwidth DC ~ 1MHz
Phase Error 3º or less from DC ~ 50kHz

     OUTPUT SIGNAL

 Trigger Signal Output Voltage : approx. 50mV/DIV into 50Ω
Calibrator Output 1kHz Square wave, 2Vpp+2%
     POWER SOURCE AC 100V / 120V / 220V / 230V+10%, 50 / 60Hz
     ACCESSORIES Power cord x 1,
Instruction manual x 1,
Probes (10  1/1 :1)x2
     DIMENSIONS & WEIGHT 310(W) x 150(H) x 455(D) mm；Approx. 8.2kg
 

Phone: 813-971-5001
Fax : 813-971-5117

Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Toll Free
1-800-783-6664

email sales@omnicontrols.com
Sales@Omnicontrols.com

We guarantee a 24 hour response on all inquiries made via email.
For quicker response please call Omni Controls
at any of the above numbers

 


Please Note: All prices subject to change without notice
copyright©omnicontrols.com - All Rights Reserved.
Terms and Conditions for Omni Controls Inc - online. Legal Disclaimer
Supplementary Information and Cover Art Copyright omnicontrols.com. All rights reserved.

copyright © omnicontrols 2005
Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Email: sales@omnicontrols.com

Phone: 800-783-6664
Fax: 813-971-5117