SPECTRUM ANALYZER SELECTION GUIDE

                                                         FEATURES

GSP-827 (9kHz ~ 2.7GHz) MSRP $4700	Superior Performance:
	Frequency Range: 9kHz~2.7GHz.
	Input Range: -100dBm~+20dBm
	Average Noise Floor: -130dBm/Hz
	Power Measurements: ACPR/OCBW/CH Power
	Split Window: Simultaneous Measurements in Two Separate Frequency Spans.
	RBW: 3KHz, 30KHz, 300KHz, 4MHz 300Hz RBW, EMI Filters, AM/FM Demodulation options available
	Portability:
	Light Weight at 4.5kg and Compact Size
	AC/DC/Battery Operation
	100 Trace/State Memories with Date/Time stamp and file name
	Easy-To-Use:
	10 Markers: Delta Mode, Peak Search, Peak Track Trace Function: Dual-Trace Display, Peak Hold, Freeze, Average, Trace Math
	Limit Line: Upper/Lower Limit with Pass/Fail Test
	Trigger Function: Video/ External
	Clock/Calendar: Time/Date Stamp in Saved Data
	Wide Range of External Reference Clock: 1MHz...19.2MHz

Data Sheet User Manual Download Software
SPECIFICATIONS
Frequency
Frequency Range	9kHz-2.7GHz
Frequency Accuracy	See time base
Span Range	2kHz to 2.5GHz in 1-2-5 sequence, full span, zero span
Span Accuracy	See time base
Phase Noise	-85dBc/Hz @1GHz 20kHz Offset typical
Time Base	+ 10ppm, 0-50°C, 5ppm/yr
Resolution Bandwidth
RBW Range	3kHz, 30kHz, 300kHz, 4MHz
RBW Accuracy	15%
Video Bandwidth Range	10Hz to 1MHz in 1-3 steps
Sweep time	100ms to 25.6s
Amplitude
Measurement Range	-100dBm to +20dBm: 1M~2.5GHz @ 3k RBW -95dBm to +20dBm: 2.5GHz~2.7GHz @ 3k RBW -70dBm to +20dBm: 150k to 1MHz @ 3k RBW -60dBm to +20dBm: 50k to 150kHz @ 3k RBW
Reference Level Range	-30dBm to +20dBm, overload protected
Accuracy	+ 1.5dB @100MHz
Frequency Flatness	+ 1.5dB
Display Range Linearity	+ 1.5dB over 70dB
Dynamic range
Average Noise Floor	-130dBm/Hz: 1MHz to 2.5GHz -125dBm/Hz: 2.5GHz to 2.7GHz -105dBm/Hz: 150k~1MHz -95dBm/Hz: 50k~150kHz
Third Inter-modulation	< -70dBc @-40dBm Input, 2MHz apart
Harmonic Distortion	< -60dBc @-40dBm Input
Non-harmonic Spurious	< -60dB typical Down from Reference Level 150k to 2.7GHz
Input
RF Input Overload protection	+30dBm, 25VDC
RF Input Impedance	50£[ nominal
RF Input Return Loss	<1.5:1 @ 0dBm Reference Level
RF Input Connector	Type: N female
External Reference Input	1M, 1.544M, 2.048M, 5M, 10M, 10.24M, 13M, 15.36M, 15.4M, 19.2M
Output
Reference Clock Output	10MHz
Features
Marker Mode	Normal and Delta Mode
Marker Number	Up to 10 in Multi Maker Mode
Peak Search	To Peak, To Conter, Next Peak, Peak Right, Peak Left and Peak Track
Trace Number	2, Tr A and B for Display Memory
Trace Function	Peak Hold, Average, Freeze, Math Detect: Sample, Peak+, AVG 1/2/3, Quasi-Peak
General
Display	640 x 480 high resolution graphical LCD, B&W
RS-232	Sub-D 9 pins female
Power Source
Line Voltage Range	100V ~ 240V AC, automatic selection
Line Frequency	48Hz ~ 63Hz
Power Consumption	85Watts, 95VA maximum, with fan
Accessories	Power cord x 1 ; Instruction manual x 1 ; Quick Start manual x 1
Dimensions & Weight	330(W) x 170(H) x 340(D) mm, Approx. 4.5kg
Options
Opt. 01
Tracking Generator	• Frequency Range: 9k to 2.7GHz • Amplitude Range: -50dBm to 0Bm • Amplitude Accuracy: +1dB@100MHz, 0dBm • Amplitude Flatness: +1.5dB@0dBm • Harmonics: <-30dBc typical • Reverse Power: +30dBm • Impedance: Type: N female, 50£[ nominal • RF output VSWR: < 1.5:1
Opt.02
Li-ion Battery Pack	• IAC 100~240V ; DC 12V ; 10.8V Li-Ion Battery Pack
Opt. 03
±1ppm Stability	±1ppm, 0~50°C, 1ppm/yr
Opt. 06
GPIB Interface	• IEEE 488 Bus
Opt. 07
Soft Carrying Case	• GSC-001
Opt. 08
General kit set	• ADP-002: N-SMA adapter x2 • ATN-100: 10dB attenuator x1 • GTL-303: RF cable(SMA-SMA, RD316, 600mm) x2 • GSC-002: Kit box x1
Opt. 09
CATV kit set	• ADP-001: N-BNC adapter x2 • ADP-101: 50Ω to 75Ω adapter x2 • GTL-304 RF cable(N(p)-N(J), RG223, 300mm) x2 • GSC-003: Kit box x1
Opt. 10
RLB kit set	• GAK-001: Termination x1 • GAK-002: Cap with Chain x1 • GTL-302: RF cable(N(P), RG223, 300mm) x2 • GSC-004: Kit box x1
Opt. 11
DC Power Line	• GTL-401: DC Power cord with DC jack and lighter plug, current 5A
Opt. 12
EMI Filter (*)	• RBW Selections: 9kHz and 120kHz, 6dB bandwidth
	• RBW Accuracy: 15%
Opt. 13
Demodulator (*)	• Demodulation: AM, FM
	• Output: Internal speaker, 3.5mm stereo jack wired for mono operation
Opt. 14
EMI Filters and 300Hz RBW (*)	• RBW Selections: 9kHz and 120kHz, 6dB bandwidth 300Hz, 3dB bandwidth
	• RBW Accuracy: 15%
Opt. 15
EMI Filters and Demodulator (*)	• RBW Selections: 9kHz and 120kHz, 6dB bandwidth
	• RBW Accuracy: 15%
	• Demodulation: AM, FM
	• Output: Internal speaker, 3.5mm stereo jack wired for mono operation
Opt. 16
EMI Filters, 300Hz RBW, and Demodulator (*)	• RBW Selections: 9kHz and 120kHz, 6dB bandwidth 300Hz, 3dB bandwidth
	• RBW Accuracy: 15%
	• Demodulation: AM, FM
	• Output: Internal speaker, 3.5mm stereo jack wired for mono operation
NOTE (*): Only one option could be installed for one given GSP-827 unit

GSP-810 (150kHz ~ 1000MHz) MSRP $2375	FEATURES：
	Frequency Range : 150kHz ~ 1000MHz
	Fully Digital Phase Locked Loop Technique Design
	High Frequency Stability : ±10ppm
	High Resolution of Span to Measure the more detailed signal :      Zero,  2kHz ~ 100MHz /DIV
	RBW : 3k, 30k, 220k, 4M
	High Input Protection Level : +30dBm, ±25VDC
	Reference Level Range : -30dBm ~ +20dBm
	Good Noise Floor Performance : -95dBm @30kHz, -100dBm typical ;     over -150dBm/Hz typical @220kHz and 4MHz RBW
	Spurious Noise : < -60dB
	Inter-modulation (3rd) : < -70dBc
	Two Markers for Absolute and Relative Measurement
	Functions : Max. Hold, Average (2 ~ 32 traces), Freeze, Peak Search, Marker to         Center Function
	9 Memories of Save/Recall
	RS-232 Interface and Display Software to get Trace from GSP-810 to PC
	Options :Power Meter, Tracking Generator, Remote Control Software

Data Sheet User Manual Download Software
SPECIFICATIONS
FREQUENCY
Frequency Range	150kHz ~ 1000MHz
Frequency Resolution	1kHz C.F. entry, 40Hz Sweep resolution at 2kHz/DIV
Frequency Display	6 1/2 digit setting
Frequency Control	Digital phase locked
Frequency Stability	±2ppm/year aging,±10ppm, 0 to 50°C
Frequency Spans	Zero, 2kHz to 100MHz/DIV, in a 1-2-5 sequence
BANDWIDTH
Resolution Bandwidths	3kHz,30kHz, 220kHz, 4MHz
Resolution BW Accuracy	15%
Video Bandwidth	1.6kHz/90kHz coupled with RBW
AMPLITUDE
Reference Level Range	-30dBm to +20dBm
Reference Level Accuracy	±1dB at 80MHz
Input Level Range	-100dBm to +20dBm
Noise Floor	-95dBm@30kHz RBW, -100dBm typical/-75dBm:150kHz ~ 10MHz
Amplitude Display Range	75dB
Amplitude Accuracy	±1.5dB typical@0dBm, 80MHz
Amplitude Level Linearity	±1.5dB over 70dB
Ref. Level Freq. Flatness	±1.5dB over 100MHz, ±2.5dB typical over entire band/±3dB:150kHz ~10MHz
Harmonic Spur Response	<-40dBc, RF input < selected reference
Non-Harmonic Spur Response	<-60dBc typical down from reference level, average, 5MHz/div
Intermodulation(3rd)	<-70dBc, @-40dBm input, 2 tones, 2MHz apart/<-45dBc:150kHz ~10MHz
Phase Noise	-77dBc/Hz at 1GHz, 30kHz offset
INPUT
Input Overload Protection	+30dBm continuous, ±25VDC
Impedance	50 ohm nominal
Return Loss	<16 dBRL (VSWR < 1.35)
Input Attenuation	50dB to 0dB in 10 dB steps coupled to reference level
Connector	Type N female
MARKER
Number of Markers	2
Marker Resolution	0.1dB, 1kHz
Marker Mode	Absolute, Relative, PK -> Marker, Marker -> Center
Marker Accuracy	0.1dB±amplitude accuracy
FUNCTIONS
Memory	9 memories of save/recall
Trace	Max. Hold, Average(2 ~ 32 traces), Freeze (Hold)
Setup	Access parameters
FM/AM DEMODULATOR
WB FM	120kHz deviation
MB FM	75kHz deviation
NB FM	30kHz deviation
AM Outputs	Internal speaker, 3.5mm stereo jack, wired for mono operation
REMOTE DISPLAY SOFTWARE & RS-232
Connecting to PC and getting trace from GSP-810, software will be downloaded from here
GENERAL
Power Source	100/120/220/230V AC±10%, 50/60Hz
Accessory	Operation manual x 1
Dimensions and Weight	310(W) x 150(H) x 455(D)mm, approx. 8.5kg
OPTIONS
TRACKING GENERATOR (OPTION 01)
Frequency Range	10MHz to 1000MHz
Amplitude Range	0 to -50dBm
Amplitude Resolution	1dB
Amplitude Accuracy	±1dB@0dBm, 80MHz
Attenuation Accuracy	±1dB@, 50MHz
Amplitude Flatness	±1dB@, 10MHz/DIV, ±1.5dB@0dB,entire band
Harmonics	<-30dBc
Reverse Power	<+30dBm
Impedance	50 ohm nominal
Return Loss	<10 dBRL (VSWR<2)
Connector	Type N female
POWER METER (OPTION 02)
Frequency Range	10MHz to 2GHz, usable to 2.7GHz
Power Level Range	-20dBm to +23dBm, usable to +30dBm
Power Level Overload	+40dBm<10% duty cycle, <10mS duration
Return Loss	<1:1.35 VSWR into 50 ohms, <1:1.25 typical
Readout Resolution	0.2mW, 100mW scale, 2µW, 1mW scale; 0.1dB, Log scale
Accuracy	±(10% rdg ±1digit)
Readout	mW or dBm
REMOTE CONTROL SOFTWARE (OPTION 03)
Connecting PC to get trace and provide the control for setting

Instek
Spectrum Analyzer
Oscilloscopes
Power Supplies
Signal/Function Generators
Bench Type MultiMeter
Hand-Held Digital Multimeter
Component and Safety Testers
Test Leads and Accessories
Other Products