The Model 6010 Hall-effect gaussmeter represents the latest
innovations and state-of-the-art designs from the world leader in magnetic measuring
equipment. F.W. Bell's exclusive Dynamic Probe Correction feature, along with
temperature compensation, allows measurements up to 300 kG with a basic accuracy of
0.25%.
SPECIFICATIONS:
Key features include Peak Hold, Max/Min Hold, Auto Zero, Auto Range,
Relative Mode and Temperature measurement. The Model 6010 allows the user to select
Gauss, Tesla or Ampere/Meter readings. The Model 6010 also features a corrected analog
output (± 3 V Full Scale for each range), an RS-232 communications port, a rechargeable
battery and probe temperature compensation. The Temperature measurement feature, used with
the new 6000 Series 5th Generation Hall-effect gaussmeter probes, allow the user to
take temperature readings (-40 0C to +85 0C) while monitoring the magnetic field.
The easy-to-read large format alpha-numeric LCD, with dual 3 3/4 digit read outs, gives
the user magnetic field flux density readings while also displaying temperature (or Peak
Hold, or Max/Min Hold)
User prompts on the custom formatted LCD allow fast, simple
push button operation. All models come equipped with a zero gauss chamber, accessory hard
case, built-in rechargeable battery, quick reference card and instruction manual. A wide
range of axial and transverse probes are available as options.
Applications for the Model 6010 range from the most
sensitive laboratory environments to rugged industrial settings. All instruments are fully
CE compliant.
The all new 7000 Series Gauss/Tesla-Meters
from Sypris Test & Measurement lead
the way for Advanced Hall Effect Magnetic
measuring technology. The easy-to-use
front-panel programming feature incorporates the
latest in user control operations. The
7000 Series instruments are capable of
simultaneously measuring and displaying seven
different parameters per channel -- 27 total
parameters for the 7030 three-channel model.
The single-channel
7010 and three-channel
7030 models are
high accuracy instruments fully equipped to meet
most all magnetic measuring applications. And
F.W. Bell's exclusive dynamic probe correcting
software actually increases the 7000 Series
measurement capabilities to make it the
most versatile magnetic measuring tool in the
world.
Key features include
high-resolution, high-accuracy and high-speed
with a bright 1/4 VGA display. The 7000
Series features 50 kHz frequency response,
a 100 samples-per-second update rate,
temperature and frequency measurements, Auto
Zero, Auto Range, Hold functions for Peak,
Valley, Min and Max, corrected and uncorrected
outputs for each channel and Vector
Summation and angle (three-channel model). The
7000 Series provides Gauss, Tesla, Oe and A/m,
as well as IEEE-488, RS-232 communications ports
and Classifier output, and are fully CE
compliant.
Reference
Magnets - Used
to verify the calibration of a
Gauss/Tesla-Meter.
Technical
Support for the 7000 series - Online
technical support resources for the 7000
series, including manuals, FAQs, firmware
upgrades & utilities.
The Model 7010 single-channel Advanced
Gauss/Tesla-Meter from F.W. Bell is capable of
simultaneously measuring and displaying seven different
parameters per channel -- flux density, frequency, temperature,
min, max, peak and valley.
Key features include high-resolution,
high-accuracy and high-speed with a large graphic
electroluminescent display. The 7010 provides 50-kHz
frequency response, temperature and frequency measurements, Auto
Zero, Auto Range, Hold functions for Peak, Valley, Min and Max,
corrected and uncorrected outputs for each channel and
Vector Summation and angle. The Model 7010 provides the user with
gauss, tesla, Oe, A/m, IEEE-488 and RS-232 communications ports
and Classifier output.
The 7010 operates with Bell's fifth generation
Hall Effect probes. These probes provide temperature
compensation and measurement readings (-40°C to +100°C)
while monitoring the magnetic field. Applications range from
basic magnetic measuring to sensitive complicated three-axis
vector summing requirements.
7010
Data Sheet - A complete
set of instrument specifications in PDF format.
The Model 7030
three-channel Advanced
Gauss/Tesla-Meter from F.W. Bell is capable of
simultaneously measuring and displaying seven different parameters
per channel -- flux density, frequency, temperature, min, max,
peak and valley. With its vector summation feature, the 7030
can measure and display a total of 27 different parameters.
Key features include high-resolution,
high-accuracy and high-speed with a large graphic
electroluminescent display. The 7030 provides 50-kHz
frequency response, temperature and frequency measurements, Auto
Zero, Auto Range, Hold functions for Peak, Valley, Min and Max,
corrected and uncorrected outputs for each channel and
Vector Summation and angle. The Model 7030 provides the user with
gauss, tesla, Oe, A/m, IEEE-488 and RS-232 communications ports
and Classifier output.
The 7030 operates with Bell's fifth generation
Hall Effect probes. These probes provide temperature
compensation and measurement readings (-40°C to +100°C)
while monitoring the magnetic field. Applications range from
basic magnetic measuring to sensitive complicated three-axis
vector summing requirements.
7030
Data Sheet - A complete
set of instrument specifications in PDF format.
F.W. Bell’s fifth generation
Gauss/Tesla-Meter probes are designed to meet the electrical and
mechanical requirements of virtually any application. Models are
available for transverse (lines of flux moving perpendicular
through the probe tip) and axial (magnetic lines of flux moving
through the length of the probe) measurements. Cryogenic,
magnaprobe and multi-axis probes are also available.
The 7000 series probes are the
most advanced probes ever built by F. W. Bell. These probes
are precisely calibrated for sensitivity and offset drift over
temperature, along with all of the normal calibration steps
performed on previous probe series. They are also
calibrated for frequency response into the multi-kilo hertz range,
making them the most advanced magnetic sensing devices available.
Although these probes look similar to 6000 series probes, the
extra performance characteristics are only available when matching
the 7000 instrument to the 7000 probe. Legacy adaptors are
available to allow older model probes to function with the 7000
instrument, although the accuracy of combination will be no
better than the existing probe specification.
F.W. Bell's fourth generation gaussmeter probes are
designed to meet the electrical and mechanical requirements of virtually any
application. Models are available for transverse (magnetic lines of flux moving
perpendicular through the probe tip) and axial (magnetic lines of flux moving through the
length of the probe) measurements. Cryogenic, magnaprobe and multi-axis probes are
also available. The probe style is generally dependent upon the measurement
environment. The standard (fiberglass stem) is recommended for laboratory or light
handling environments, while the Heavy duty (aluminum stem) is recommended for unknown or
heavy handling environments. Custom probes available upon request. F.W. Bell's
fourth generation gaussmeter probes are designed to meet the electrical and mechanical
requirements of virtually any application. For customer convenience, most gaussmeter
probes are available for delivery within one to two business weeks.
Model 9550/9950 Gaussmeter Probes
Description
F.W. Bell's fourth generation gaussmeter probes are
designed to meet the electrical and mechanical requirements of virtually any
application. Models are available for transverse (lines of flux moving perpendicular
through the probe tip) and axial (magnetic lines of flux moving through the length of the
probe) measurements. Cryogenic, magnaprobe and multi-axis probes are also available.
The probe style is generally dependent upon the measurement environment. The
standard (fiberglass stem) is recommended for laboratory or light handling environments,
while the Heavy duty (aluminum stem) is recommended for unknown or heavy handling
environments. Custom probes available upon request. F.W. Bell's fourth generation
gaussmeter probes are designed to meet the electrical and mechanical requirements of
virtually any application. For customer convenience, most gaussmeter probes are available
for delivery within one to two business weeks.
Model 9200 Gaussmeter Probes
Description
F.W. Bell's fourth generation gaussmeter probes are
designed to meet the electrical and mechanical requirements of virtually any
application. Models are available for transverse (magnetic lines of flux moving
perpendicular through the probe tip) and axial (magnetic lines of flux moving through the
length of the probe) measurements. Cryogenic probes are also available. The probe
style is generally dependent upon the measurement environment. The standard
(fiberglass stem) is recommended for laboratory or light handling environments, while the
Heavy duty (aluminum stem) is recommended for unknown or heavy handling
environments. Custom probes available upon request. For customer convenience, most
gaussmeter probes are available for delivery within one to two business weeks.
Probe Extension Cables
The calibrated extension cable (*)are
calibrated at the factory to achieve less than 0.1% error with a specific probe. The
cable will be in calibration with that probe only. Other probes, even of the same
model number, will not be in calibration with the cable.
I. Extension Cables for
Models 9950/9550, & 9200
Model
Item Number
A
Error
XOQ92-0010
127400
10' + 2"
<0.1%
XOQ92-0025
127401
25' + 2"
<0.1%
XOQ92-0050
127402
50' + 2"
<0.1%
XOQ92-0100
127403
100' + 2"
<0.1%
Model
Item Number
A
Error
XOQ99-0010
127420
10' + 2"
<0.1%
XOQ990025
127421
25' + 2"
<0.1%
XOQ99-0050
127422
50' + 2"
<0.1%
XOQ99-0100
127423
100' + 2"
<0.1%
II. Extension Cables for
Model 9640
Model
Item Number
A
Error
XOVO-0010
126951
10' + 2"
1%
XOQ4-0010
126959
10' + 2"
<0.1%*
XOVO-0025
126952
25' + 2"
<0.1%
XOQ4-0025
126960
25' + 2"
<0.1%*
Model
Item Number
A
Error
XOVO-0050
126953
50' + 2"
<0.1%*
XOQ4-0050
126961
50' + 2"
<0.1%
XOVO-0100
126954
100' + 2"
<0.1%*
XOQ4-0100
126962
100' + 2"
<0.1%
Phone:
813-971-5001
Fax : 813-971-5117
Omni
Controls Inc.
5309 Technology Dr.
Tampa, FL 33647
Toll
Free
1-800-783-6664
Sales@Omnicontrols.com
We
guarantee a 24 hour response on all inquiries made via email.
For quicker response please call Omni Controls
at any of the above numbers
F W Bell Bench Top Gaussmeters -
Magnetic Measurement
7010
Data Sheet
