Fluke 983 Particle Counter

Take a new look at indoor air quality The new Fluke 983 Particle Counter is the preferred choice for HVAC and IAQ professionals. From filter testing to IAQ investigations, the Fluke 983 is the portable solution for determining airborne particle concentrations. Use the Fluke 983 to immediately respond to occupant complaints, or as part of a comprehensive preventive maintenance program. With the Fluke 983, you can: Measure filter efficiency Monitor industrial cleanrooms Pre-screen indoor air quality and confidently work with IAQ specialists Locate particle sources for remediation Report the effectiveness of repairs to customers Drive additional business by demonstrating the need for maintenance and repair With expanded data logging and six-channel particle size display, the Fluke 983 allows users to run more tests quickly, with less time spent cycling through screens to obtain the data. The Fluke 983 is lightweight and easy to use in any position, with a comfortable hand strap and rugged rubber holster.

Fluke 983 Particle Counter

Specifications Channels 0.3, 0.5, 1.0, 2.0, 5.0, 10.0 µm Flow Rate 0.1 cfm (2.83 L/min) controlled by internal pump Count Modes Concentration, totalize, audio Counting Efficiency 50% @0.3 µm; 100% for particles > 0.45 µm (per JIS B9921:1997) Zero Count 1 count/5 minute (JIS B9921:1997) Coincidence Loss 5% at 2,000,000 particles per ft3 Relative Humidity ± 7%, 20% to 90% non-condensing Temperature ± 3 ˚C, 10 ˚C to 40 ˚C (50 ˚F to 104 ˚F) Data Storage 5000 sample records (rotating buffer) of date, time, counts, relative humidity, temperature, sample volumes, alarms, label Alarms Counts, low battery, sensor fail Delay Time 0 to 24 hours Sample Inlet Isokinetic probe Interface RS-232 and RS-485 via RJ-45 Environmental Specifications Operating: 10 ˚C to 40 ˚C (50 ˚F to 104 ˚F), 20% to 90% relative humidity, non-condensing Storage: -10 ˚C to 50 ˚C (14 ˚F to 122 ˚F), up to 90% relative humidity, non-condensing Mechanical & General Specifications Size 11.43 cm x 20.96 cm x 5.72 cm (4.5 in x 8.25 in x 2.25 in) Dimensions (W x L x D) Weight 1.0 kg (2.2 lbs) Power AC adapter, 12 V DC at 2.5A, 90 to 250 V AC, 50 to 60 Hz Rechargeable Battery NiMH, 4.8 V at 4.5 Ah; replaceable Battery Life 8 hours Recharge Time 2 hours Calibration PSL particles in air (NIST traceable)

Fluke 983 Particle Counter

Assess air quality more easily and accurately The Fluke 983 Particle Counter simultaneously measures and displays six channels of particle size distribution, temperature and humidity. This compact, lightweight, self-contained tool allows for one-handed operation. The Fluke 983 maintains its accuracy when used in any position. The 8 hour rechargeable battery together with a large 5000 sample record capacity allows for uninterupted performance during air quality surveys. The Fluke 983 is the ideal tool for determining size distribution of airborne particles or tracking down a particle source.   Simultaneously measure and display 6 channel of particle sizes, temperature and humidity Measure particle size down to 0.3 µm Selectable sample time, count data, programmable delay Store 5000 records of date, time, counts, relative humidity, temperature, sample volumes, alarms and location label Upload stored data to a PC with included software Compact, self-contained package allows for one-handed operation Intuitive, easy to use user interface Always ready to run, with no fluids to refill Backlit LCD for use in any lighting condition 8 hour rechargeable NiMH battery Protective holster

Features at a Glance

The Fluke CO-210 Carbon Monoxide Probe is an accessory for use with a digital multimeter with dc millivolt inputs. The CO-210 utilizes the newest generation of electro-chemical sensors (fast responding) and an intelligent microprocessor to provide higher accuracy and reliability. Use the CO-210 as an accessory to your digital multimeter for a display of carbon monoxide levels, or as a stand-alone indicator by relying upon the "sun-bright" LED and beeper which trigger with increasing frequency as the levels of CO rise.

• Rugged case and electronics
• Displays CO levels on multimeter from 0 to 1000 ppm
• Acts as a stand-alone device with LED and beeper CO indicators
• CO indicator beeper can be silenced
• Automatic sensor zeroing and self-test sequence upon start-up
• Easy to replace battery
• Simple on/off switch operation
• Replaceable sensor extends tool life
• Includes C50 Soft Carrying Case, battery (installed) and instruction sheet
• Detachable RJ-45 connection to probe and standard banana jack to multimeter
• Automatic power-off after 20 minutes extends battery life.
• Battery life 500 hours with alkaline battery
• Stabilized electrochemical CO specific sensor with 2 second warm-up
• Typical 3 year sensor life; one year calibration cycle

Specifications

Range:	0 to 1000 ppm
Resolution:	1 ppm
Accuracy:	3%

Manuals

Available Models

Fluke CO-210   Description: Carbon Monoxide Probe   Accessories: View List   Pricing 1: $209.00

Available Accessories and Options

CO-205
Aspirator Kit

Product Home | Manuals

Sample flue gas with your Fluke CO-210 or CO-220 using the CO-205 Aspirator Kit

Draw flue gas samples up to 700 ºF (370 ºC) reliably for measurement with the Fluke CO-210 Carbon Monoxide probe or Fluke CO-220 Carbon Monoxide meter.

The CO-205 aspirator accessory kit contains all the components necessary to provide a clean sample for the Fluke family of gas measuring devices.

Features at a Glance
The CO-205 accessory kit includes:

• Stainless steel sampling tube.
• Industrial-grade hand operated aspirator to draw flue sample.
• Easy to replace particulate filter.
• Specially designed nose cap for connection to the Fluke CO-210/220.
• 4' (1.2m) hose length.