Hanna Conductivity Meters

HI 991300 • HI 991301 Waterproof pH, EC, TDS & Temperature Meters 4 instruments in one! - pH, conductivity, TDS and temperature all in one meter with a single probe. Waterproof - HI 991300 and HI 991301 are housed in a compact waterproof, IP67 rated case. Tailor made for your application - Customize pH/EC calibration, select EC/TDS conversion factor and temperature coefficient and choose the temperature scale that best fits your application. Ease of use, accuracy and durability - Two button operation, microprocessor based, rugged instrument and probe construction. Order Information Specifications

Pocket Conductivity Meters

HANNA POCKET CONDUCTIVITY METERS
	DiST-ATC Total Dissolved Solids Tester DiST 1 & DiST 3 Water treatment (softener, demineralization, reverse osmosis, drinking water), Fish farming and aquariums & Pollution control. DiST 2 & DiST 4 Agriculture, horticulture and hydroponics, Cooling towers, Boiling and steam heating plants & Water purification plants. Suggested Retail Price: $49.95

Regardless of what field you are in, the amount of salt or solids (TDS) in water is important. Salt causes corrosion and leaves scale deposits which will damage industrial equipment. Too much salt can harm aquatic flora and fish and too little salt (conductivity) will prevent effective transfer of nutrients to the plant life. Salt is not desirable in your drinking water.

The DiST testers are reliable, pocket-sized instruments that will give you quick and accurate readings of conductivity and TDS. No need to match colors or use dropper bottles. Simply dip the tester and read the display. DiST 1 and DiST 2 give readings in ppm (parts per million of CaCO3), and DiST 3 and DiST 4 give readings in µS/cm (micro siemens).

Temperature effects your conductivity measurements by 2% per degree centigrade. Automatic Temperature Compensation assures that all readings are corrected to compensate for the effect of temperature. An LCD displays the digits clearly so they can be read at virtually any angle. If calibration is necessary simply submerge the electrode into calibration solution, and turn the trimmer at the back of the tester.

Specifications:

                       DiST 1        DiST 2         DiST 3        DiST 4

  Range:             1,990 ppm     10,000 ppm    1,990 µS/cm   19,900 µS/cm  

  Resolution:         10 ppm         100 ppm      10 µS/cm      100 µS/cm    

  Accuracy:                             ±2% Full Scale

  Temp.Compensation:          Automatic from 5 to 50°C (41 to 122°F)

  Calibration:             Manual one point through adjustment trimmer

  Battery:                               4 x 1.4 Volts

  Battery Life:                            350 hours              

  Environment Temp.:                 32 to 122°F (0 to 50°C)

  Weight:                                 3 oz.(85 g)

  Dimensions:                  5.9 x 1.2 x 0.09"(150 x 30 x 24mm)

	DiST Waterproof- Conductivity & Total Dissolved Solids Tester DiST WP 1 & DiST WP 3 Water treatment (softener, demineralization, reverse osmosis, drinking water), fish farming, aquariums & pollution control. DiST WP 2 & DiST WP 4 Agriculture, horticulture, hydroponics, cooling towers, boiling, steam heating & water purification plants.

The new and improved DiST Waterproof meters offer 10 times better resolution, eliminating the need to multiply the display by a factor of 10. The battery life has also been more than doubled. Housed in IP67 waterproof ABS cases, these pocket-sized Conductivity and Total Dissolved Solids testers ensure the best protection against dust and humidity in indoor and outdoor applications. Ideal for fish farming, agriculture, plating, water purification or anywhere humidity levels are high. If accidentally immersed in water, the circuitry will remain unharmed. This makes them immune to accidental spills that could harm the electronics.

In the TDS range, two different testers are available: DiST WP 1 with a range of 1,999 ppm (ratio between conductivity and TDS is factory calibrated at 0.5 [CaCO₃ value]) is suitable for low TDS measurement such as in cooling towers. DiST WP 2 with a range of 10.00 ppt (or 10,000 ppm) is perfect for HVAC applications.

In order to optimize the resolution, two Conductivity testers are also offered: DiST WP 3 with a range of 1,999 µS/cm, is perfect for swimming pools and drinking water control. DiST WP 4 with a range of 19.99 mS/cm is ideal for higher concentrations such as agriculture and waste water treatment.

Specifications:

                    DiST WP 1     DiST WP 2      DiST WP 3     DiST WP 4

  Range:         1,999ppm(mg/L) 10.00ppt(g/L)   1,999µS/cm    19.99mS/cm  

  Resolution:      1ppm(mg/L)    0.01ppt(g/L)    1 µS/cm      0.01 mS/cm    

  Accuracy                  

   (@68°F/20°C):                       ±2% Full Scale

  Typical EMC               

   Deviation:                          ±2% Full Scale

  Calibration  

   Solution:        HI 7032P      HI 7038P        HI 7031P     HI 7039P    

  Calibration:            Manual one point through adjustment trimmer

  Temperature         

   Compensation:              Automatic from 41 to 122°F (5 to 50°C)

  Battery:                              4 x 1.4 Volts

  Battery Life:                350 hours approx continuous use              

  Environment:                 32 to 122°F (0 to 50°C);RH 100%

  Dimensions:                 5.9 x 1.2 x 0.9"(150 x 30 x 24mm)

  Weight:                                3 oz.(85 g)

	CONMET-The First Stick Conductivity Meter on the Market with 4-Ring Technology and ATC 4-Ring potentiometric probe for unsurpassed accuracy. Automatic Temperature Compensation ensures the highest accuracy. Interchangeable probe. Compact unit fits easily into shirt pocket. Two Conductivity and one TDS range to suit your applications. Long battery life for extended versatility. Ratio between conductivity and TDS is factory calibrated at 0.5 (CaCO3 value).

CONMET The need for an easy, accurate and reliable method to measure conductivity and TDS prompted Hanna to develop the most sophisticated stick conductivity meter on the market today. CONMET 1, CONMET 2 and CONMET 3 utilize the proven 4-ring potentiometric method of measuring conductivity in liquids. This technological breakthrough has enabled CONMET meters to offer more accuracy and reliability than any other hand-held unit. The 4-ring probe is constructed of a rugged resin shaft that houses 4 stainless steel rings, providing excellent immunity to hostile environments. The 4-Ring technology provides a linear reading that is almost immune to dirt and unclean samples. The smooth shaft of the probe makes cleaning quick and simple. All the readings are temperature compensated. The probe slides off for easy replacement. 1 point calibration is performed by turning the trimmer on the instrument body. CONMET 1 has a range of 0 to 1999µS, designed for areas such as softeners, demineralizers, and drinking water. CONMET 2 has a range of 0.00 to 19.99 mS and is particularly suitable for waste water, hydroponics and fertilizer control. CONMET 3 with a range of 0.00 to 19.99 g/l, is perfect for HVAC applications.

Specifications:

                       CONMET 1           CONMET 2            CONMET 3

  Electrode:           HI 3291            HI 3292             HI 3292

  Range:            0 to 1999µS/cm   0.00 to 19.99mS/cm    0.00 to 19.99g/l

  Resolution:          1 µS/cm           0.01 mS/cm           0.01 g/l    

  Accuracy:                        2% of full scale

  Temp.Compensation:        Automatic from 32 to 122°F (0 to 50°C)

  Calibration:       Single turn trimmer for 1 point slope calibration

  Battery:                            4 x 1.4 Volts

  Battery Life:         Approximately 150 hours of continuous use              

  Environment Temp.:            32 to 122°F (0 to 50°C)

  Weight:              400 g (14.1 oz.) complete with carrying case

	UPW-Ultra Pure Water Tester for Megohm Checks 0.001 Microsiemens Read-out The first conductivity tester to read 0.001µS/ cm A MUST anywhere distilled water is used. Battery operated and accurate. Compact size to fit in a lab coat pocket. Fast read-out on a large LCD display

UPW is the first pure water tester to measure in 1/1000ths of micro-siemens. If you use deionized or distilled water, UPW offers the only inexpensive method to guarantee its quality. UPW provides on-the-spot and fast checks of minute traces of contamination in your water assuring high quality of products in processes such as printed circuit board cleaning. In biology and laboratories the success or failure of many tests depends on the purity of the test water and reagents. Armed with UPW you can assure that the water is pure and meets the specs before starting your tests. No need to repeat time-consuming and laborious tests all over again.

UPW has a detachable probe which reveals a trimmer for adjustment and calibration. The meter is housed in a rugged ABS case that resists the harmful conditions in industrial applications. An LCD displays the reading in a manner that is readable at virtually any angle. UPW is supplied complete with a conductivity probe, a calibration simulator and a screwdriver in a rugged carrying case, ready to be used.

Specifications:

  Probe:                 HI 3935 (included)

  Range:                 0.000 to 1.999 µS/cm

  Resolution:            0.001 µS/cm

  Accuracy:              ±2% Full Scale

  Calibration:           Manual 1 point through adjustment trimmer

  Environment Temp.:     32 to 122°F (0 to 50°C)

  Battery:               4 x 1.4 Volts

  Battery Life:          120 hours of continuous use

  Weight:                3.0 oz.(85 g)

  Dimensions:            2.6 x 2.0 x 1"(190 x 30 x 15 mm)

.

The PWT enables you to check the purity of water. This is a very important factor for water being used in laboratory and industry. PWT is housed in a sturdy plastic case which provides excellent protection against damage and industrial environments. The range of the Pure Water Tester is 0.1 to 99.9 µS/cm.

Specifications:

  Range:                 0.1 to 99.9 µS/cm

  Resolution:            0.1 µS/cm

  Accuracy:              ±2% of Full Scale

  Temp. Compensation:    Automatic from 50 to 104°F (10 to 40°C)

  Environment Temp.:     32 to 122°F (0 to 50°C)

  Battery:               4 x 1.4 Volts

  Battery Life:          150 hours of continuous use

  Weight:                3.0 oz.(85 g)

  Dimensions:            5.9 x 1.2 x 0.9"(150 x 30 x 24 mm)

Portable Conductivity Meters

HANNA PORTABLE CONDUCTIVITY METERS
	HI 8033 Conductivity Meter for the Education Field 3 Conductivity Ranges and 1 TDS Range Whether you are measuring deionized water, drinking water, waste water or cooling tower water, HI 8033 will cover your range Simple Calibration Simply immerge the probe into a standardizing solution, choose the appropriate range and adjust the K% trimmer 4-Ring Potentiometric Probe The 4-Ring probe will provide readings with high accuracy and reliability Temperature Compensation Temperature variation can be compensated for with a single knob on the front panel

HI 8033 is a hand-held conductivity meter with the ability to take measurements in 3 different conductivity ranges, 0.0 to 199.9µS/cm, 0 to 1999µS/cm and 0.00 to 19.99mS/cm and 1 TDS range; 0 to 19,990 ppm CaCO3. The probe uses the 4-ring potentiometric method which measures conductivity with the utmost accuracy and reliability. The four stainless steel rings are embedded in the resin shaft of the probe to create a smooth surface for fast and easy cleaning. To further the accuracy, temperature compensation can be performed with a knob on the front panel of the meter. HI 8033 is supplied complete with the HI 76301 conductivity probe with 1m cable.

Specifications:

  Range:         0.0 to 199.9 µS/cm (deionized water)

                 0 to 1999 µS/cm (drinking & mineral water)

                 0.00 to 19.99 mS/cm (waste water & fertilizer concentrates) 

                 0 to 19,990 ppm CaCO3 (boilers & cooling towers)

  Resolution:    0.1 µS/cm; 1 µS/cm; 0.01 mS/cm; 10 ppm

  Accuracy:      ±1% Full Scale

  Calibration:   Manual single point through K% trimmer on front panel 

  Temperature

  Compensation:  Manual 32 to 122°F (0 to 50°C) with a ß of 2% per degree °C

  4-Ring Probe:  HI 76301 with 1m cable (included)

  Battery:       9 volt (alkaline battery)/ 100 hours of continuous use

  Environment:   32 to 122°F (0 to 50°C)

  Weight:        13 oz. (355g)

  Dimensions:    7.1 x 3.3 x 1.6" (180 x 83 x 40mm)

	HI 8633 & HI 8733 Multi-Range Conductivity Meters for Laboratory Use 4-Ring potentiometric method of measuring These meters use the proven 4-Ring method of measuring conductivity. This method is far more accurate and reliable than the common 2-ring amperometric method Rugged Probe The probe and the sleeve are made in PVC with an external diameter of 20mm and length of 120mm Four complete ranges HI 8633 / HI 8733 cover the full range of conductivity measurements ATC with Adjustable ß The temperature coefficient is adjustable from 0 to 2.5% per °C.

HI 8633 and HI 8733 have been designed specifically for use in the areas of production and quality control. It is often necessary to test samples with different concentrations ranging from deionized water to brine. The amperometric system would require constant re-calibration and probe changes, thus making the measurement process very time consuming and unreliable. To solve this problem Hanna has developed the HI 8633 which uses a 4-Ring potentiometric probe. The rugged probes made in PVC, are ideal for indoor as well as outdoor measurements. By using one point calibration, it is now possible to obtain accurate readings across the entire range (0.1 to 199,900 µS/cm). If the temperature of the solution fluctuates, the HI 8733 with a built-in temperature sensor and Automatic Temperature Compensation, is the perfect instrument.

HI 8633 is supplied complete with an HI 76301 with 1m (3.3') cable.

HI 8733 is supplied complete with an HI 7633 with 1m (3.3') cable.

As an accessory, the HI 8733 KIT is available. The kit includes a rugged carrying case with a beaker, a calibration screwdriver and standardizing solution.

Specifications:

                           HI 8633                      HI 8733

  Temperature

  Compensation:    Manual from 50 to 104°F       Automatic with a ß of 

                        (10 to 40°C)            0 to 2.5% per degree °C

  4-Ring Probe:       HI 76301 with 1 m           HI 7633 with ATC & 		

                      cable (included)            1m cable (included)

  Range:                     0.0 to 199.9 µS/cm (mmho / cm) 

                               0 to 1999 µS/cm (mmho / cm) 

                             0.00 to 19.99 mS/cm (mmho / cm)   

                              0.0 to 199.9 mS/cm (mmho / cm)

  Resolution:            0.1 µS/cm; 1 µS/cm; 0.01 mS/cm; 0.1 mS/cm

  Accuracy:                           ±1% Full Scale

  Calibration:             Manual single point through trimmer

  Battery:       9 volt (alkaline battery) / 100 hours of continuous use

  Environment:                   32 to 122°F (0 to 50°C)

  Weight:                             13 oz. (355g)

  Dimensions:             (7.3 x 3.2 x 1.8") (185 x 82 x 45 mm)

	HI 8734 Multi-Range Total Dissolved Solids Meter 3 Ranges of Measurements HI 8734 will measure samples in the HVAC industry with a single conductivity probe 4-Ring Potentiometric Method Excels The proven 4-Ring potentiometric method is so technologically advanced that it renders the 2-ring Amperometric method obsolete HI 76301 Probe The probe of the HI 8734 is smooth PVC with the rings embedded into the shaft. This makes cleaning simple and keeps measurements accurate

HI 8734 has been especially designed for the water conditioning industry, particularly in the softening, demineralization, reverse osmosis and drinking water applications. Three ranges of measurement assure the highest accuracy possible. All three ranges can be executed at the touch of a button without having to change the conductivity probe. This makes it very easy to switch applications without having to worry about re-calibration. To add to the meters' accuracy and efficiency, Manual Temperature Compensation is achieved through a knob on the front panel. The 4-Ring potentiometric probe is made of rugged PVC for the best protection in the field and is supplied with a 3.3' (1m) cable to access those hard to reach areas. The ratio between conductivity and TDS is factory calibrated at 0.5 (CaCO3 value). HI 8734 is supplied complete with the HI 76301 conductivity probe with 1m cable. As an accessory, the HI 8734 KIT is available. The kit includes a rugged carrying case with a beaker, a calibration screwdriver and standardizing solution.

Specifications:

  Range:         LOW- 0.0 to 199.9 mg/l (ppm)

                 MEDIUM- 0 to 1999 mg/l (ppm)

                 HIGH- 0.00 to 19.99 g/l (ppt)

  Resolution:    0.1 mg/l; 1mg/l; 0.01 g/l

  Accuracy:      ±1% Full Scale

  Calibration:   Manual single point through trimmer

  Temperature    

  Compensation:  Manual 32 to 122°F (0 to 50°C) with a ß of 2% per degree °C

  4-Ring Probe:  HI 76301  with 1m cable (included)

  Battery:       9 volt (alkaline battery) / 100 hours of continuous use

  Environment:   32 to 122°F (0 to 50°C)

  Weight:        13 oz. (355g)

  Dimensions:    (7.3 x 3.2 x 1.8") (185 x 82 x 45 mm)

	HI 93300 4-Ring Technology & Full Range in a Portable Handy Model Wide range with just one probe Thanks to the 4-ring technology, you can measure conductivity in almost any application with just one probe. No need to change probes, cell constants or recalibrate Simple-To-Operate Just switch on, dip the probe in your solution and choose your operating range Portable and Handy With rubber splash-proof keypad, wrist-strap and all keys reachable with the thumb

HI 933000 is a portable conductivity meter that measures conductivity from 0.1µS to 200 mS with just one probe! The large stainless steel 4 rings are concentrically positioned on the probe shaft with the last one housing the temperature sensor. All readings are compensated automatically for any temperature variation by 2% per degree Centigrade. A protective cap covers and protects the rings and can be easily removed making cleaning simple and quick. To operate the unit, just switch it on and choose the desired operating range. Calibration is manual so that you are not limited to one or two buffers and can calibrate the meter at the value most suited for your application. The calibration trimmer is tucked away in the battery compartment so that it is not tampered with. Hanna offers a wide selection of calibration solutions tailor-made for different applications. The ergonomically designed housing fits the palm of your hand perfectly. It can be operated with one hand and its rubber keypad is splash-proof. HI 933000 is supplied complete with HI 76302W conductivity probe with a 1 meter screened cable, calibration screwdriver, a wrist-strap for safety, 9V battery and instruction manual.

Specifications:

  Range:         0.0 to 199.9 µS/cm (mmho / cm)

                 0 to 1999 µS/cm (mmho / cm)

                 0.00 to 19.99 mS/cm (mmho / cm)

                 0.0 to 199.9 mS/cm (mmho / cm)

  Resolution:    0.1 µS/cm; 1 µS/cm; 0.01 mS/cm; 0.1 mS/cm

  Accuracy:      ±1% Full Scale

  Calibration:   Manual single point through trimmer in battery compartment

  Temperature    

  Compensation:  Automatic 10 to 40°C with a ß of 2% per degree °C

  4-Ring Probe:  HI 76302W with ATC 1m screened cable (included)

  Battery:       9 volt (alkaline battery)  / 100 hours of continuous use

  Environment:   32 to 122°F (0 to 50°C)

  Weight:        13oz. (360g)

  Dimensions:    5.6 x 3.2 x 1.5" (143 x 80 x 38mm)

	HI 9033 Waterproof, Multi-Range, ATC Conductivity Meter Water-Resistant Housing HI 9033 will resist the ingress of water and dust to protect its advanced electronic circuitry. 4 Ranges of Measurements With just 1 probe, HI 76302 will measure samples from deionized water to brine, without requiring re-calibration. ATC is incorporated into the probe. 4-Ring Potentiometric Method Excels The proven 4-Ring potentiometric method is so technologically advanced that it renders the 2-ring Amperometric method obsolete. Battery Error Preventive System BEPS will never let you take erroneous readings caused by low batteries.

The increasing demand for instant results of on-field analysis, without waiting for lab tests, has produced a growing necessity across the globe. Adverse weather conditions associated with use in the field, can damage a meter, rapidly deteriorating its performance and life. Due to these demands, Hanna Instruments has developed the HI 9033 to satisfy all field application needs. All conductivity readings, from deionized water to brine, are performed through the rugged 4-Ring potentiometric probe. This probe is so technologically advanced that it can measure any sample in any range of the meter without requiring re-calibration. BEPS (Battery Error Preventive System) will alert the user when low batteries could effect the readings. HI 9033 comes supplied complete with an HI 76302 conductivity probe and a rugged carrying case

Specifications:

  Range:                0.0 to 199.9 µS/cm

                        0 to 1999 µS/cm

                        0.00 to 19.99 mS/cm

                        0.0 to 199.9 mS/cm

  Resolution:           0.1 µS/cm

                        1 µS/cm

                        0.01 mS/cm

                        0.1 mS/cm

  Accuracy:             1% of Full scale

  Calibration:          Manual

  Temp. Compensation:   Automatic 

  4-Ring Probe:         HI 76302 

  Environment Temp.:    32 to 122°F (0 to 50°C)

  Weight:               3.1 lb (1.4 Kg)

  Dimensions:           7.7 x 3.1 x 2.4" (196 X 80 X 60mm)

	HI 9034 Waterproof, Multi-Range, ATC Total Dissolved Solids Meter Water Resistant Housing The rugged waterproof housing makes HI 9034 perfect for industrial and field applications 3 Ranges of Measurement HI 9034 will measure samples with extreme accuracy due to the triple range capability. The ratio between conductivity and TDS is factory calibrated at 0.5 (CaCO3 value) 4-Ring Potentiometric Method Excels The proven 4-Ring potentiometric method is so technologically advanced that it renders the 2-ring Amperometric method obsolete HI 76302 Probe HI 9034's probe is smooth PVC, with the rings embedded into the shaft. This makes cleaning simple and keeps measurements accurate

The increasing demand for instant results of field analysis, without waiting for lab tests, has produced a growing necessity across the globe. On-site measurements in the field can subject the instrumentation being used to the inclemency of the weather. The cold, rain, snow and dust associated with use in the field, will damage the meter, rapidly deteriorating its performance and life. On the other hand, HI 9034 is a multi-range TDS meter that will meet the demands of all field applications. This instrument has three ranges that will accurately measure TDS in solutions ranging from water treatment to HVAC. All three ranges can be executed at the touch of a button without having to change the conductivity probe. This makes it very easy to switch applications without having to worry about probe changes and re-calibration. HI 9034 is supplied complete with the HI 76302 conductivity probe with 1m cable and a rugged carrying case.

Specifications:

  Range:         LOW- 0.0 to 199.9 mg/l (ppm)

                 MEDIUM- 0 to 1999 mg/l (ppm)

                 HIGH- 0.00 to 19.99 g/l (ppt)

  Resolution:    0.1 mg/l; 1mg/l; 0.01 g/l

  Accuracy:      ±1% Full Scale

  Calibration:   Manual single point through trimmer on the case

  Temperature    

  Compensation:  Automatic 10 to 50°C with a ß of 2% per degree °C

  4-Ring Probe:  HI 76302 detachable with 1m cable (included)

  Battery:       1 x 9 volt (alkaline battery) 100 hours  of  continuous use

  Environment:   32 to 122°F (0 to 50°C)

  Weight:        15 oz. (425g )  KIT: 3.1 lbs (1.4Kg)

  Dimensions:    7.7 x 3.1 x 2.4" (196 x 80 x 60mm)

	HI 9039 Waterproof, Microprocessor, ATC Fertilizer Meter Water-Resistant Housing HI 9039 will resist the ingress of water and dust to protect its advanced electronic circuitry 4 Measurement Ranges This meter will measure conductivity from 0 to 9,999 µS/cm, temperature, and 2 different user selected fertilizers 4-Ring Potentiometric Method Excels The proven 4-Ring potentiometric method is so technologically advanced that it renders the 2-ring Amperometric method obsolete

In the fields of agriculture and hydroponics, many different fertilizers are used on a daily basis. The fertilizer is dissolved in water, and then used for irrigation of crops. It is crucial to monitor the amount of fertilizer being fed to the flora. Because every fertilizer has a different conductivity value, it was impossible to monitor more than one fertilizer with the same meter without re-calibration. HI 9039 has solved this problem. The 4 range meter will measure 2 different types of fertilizer (F1 and F2), conductivity and temperature. To monitor the quality of the water used with the fertilizer, the conductivity must be checked. This aids in the selection of water to be mixed with fertilizer. To measure the fertilizer content, simply standardize the two different fertilizer ranges. To do this, dissolve one gram of fertilizer in one liter of water, immerse the probe, and press the CAL button. This will standardize the meter to read "1.00"g/l. Repeat this for the second fertilizer. It is now possible to monitor the two different fertilizers without re-calibrating or changing the probe. The large LCD aids the user through operation and calibration with large comprehensive symbols. In addition to displaying the selected range, the LCD will simultaneously display the temperature. The 4-Ring probe incorporates a temperature sensor that reads in the range of 0.0 to +50.0°C. HI 9039 comes supplied complete with an HI 76302 conductivity probe and a rugged carrying case.

Specifications:

  Range:      Conductivity  0 to 9,999µS/cm (µmho / cm) 

              Temperature   0.0 to 50.0°C

              F1            0.00 to 9.99 g/l (ppt) 

              F2            0.00 to 9.99 g/l (ppt)

  Resolution: Conductivity  1µS/cm

              Temperature   0.1°C

              F1/F2         0.01 g/l

  Accuracy:                 ±1%, All Ranges

  Calibration:              Single point automatic at 5,000 µS/cm

  Temperature               

  Compensation:             50 to 122°F (10 to 50°C)

  4-Ring Probe:             HI 76302 with 1m cable (included)

  Battery:                  9 volt (alkaline) 100 hours of continuous use

  Environment:              32 to 122°F (0 to 50°C)

  Weight:                   115 oz. (425g)  KIT: 3.1 lbs (1.4 Kg)

  Dimensions:               7.7 x 3.1 x 2.4" (196 x 80 x 60mm)

	HI 933100 Auto-Ranging Conductivity and ºC on Large LCD in Waterproof Casing Dual Level LCD showing both the conductivity and the temperature Wide Range From pure water to brine with one 4-ring probe Automatic Temperature Compensation All measurements are compensated for the temperature effect at user-selectable coefficient from 0 to 3% /ºC Automatic Calibration and Buffer Recognition made simple with a sophisticated custom built microchip

HI 933100 conductivity meter employs state-of-the-art design and electronics to provide you with accurate measurements of conductivity over a wide range. The large user-friendly display shows both conductivity and temperature at the same time. With its waterproof housing HI 933100 can be used indoors as well as outdoors, from heavy-duty industrial to environmental applications. The conductivity reading starts with pure water at 0.1µS/cm and automatically switches from one resolution to the next, reaching 199,900 µS/cm with only one probe! This is thanks to its sophisticated custom-built microchip and Hanna's exclusive 4-Ring probe with a built-in temperature sensor. The microprocessor has also made temperature compensated calibration as simple as A-B-C. Press "CAL" and then "BUF" to choose between 1,413 or 12,880 µS/cm buffers, place the probe in the solution and press "CFM" to complete the calibration. No need to look up values on conductivity/temperature charts or turn knobs and screws! User-friendly symbols also indicate when the solution is recognized and once the reading has stabilized. If you are working with samples that are acidic, alkaline or with high salt content, then the temperature coefficient will typically be around 1.5% and not the standard 2% per ºC. With HI 933100, you can simply set the appropriate value through the "FACTOR" key for optimum results. You can even calculate your solutions coefficient by setting the "FACTOR" to zero, a useful tool when working with unfamiliar samples. The display gives low battery warning and switches itself off after 10 minutes to save the batteries. For continuous monitoring, HI 933100 is supplied with a built-in 12VDC socket protected behind a waterproof cover.

Specifications:

  Range:      µS/cm     0.0 to 150.0 µS/cm (µmho / cm)

              µS/cm     150 to 1500 µS/cm (µmho / cm)

              mS/cm     1.50 to 15.00 mS/cm (mmho / cm)

              mS/cm     15.0 to 199.9 mS/cm (mmho / cm)

              °C        0.0 to 60.0°C

  Resolution: µS/mS/°C  0.1 µS/cm; 1 µS/cm; 0.01 mS/cm; 0.1 mS/cm, 0.1°C

  Accuracy:             ±1% Full Scale; ±0.5°C

  Calibration:          Auto 1 point at 1,413 or 12,880 µS/cm with keyboard

  Temp Compensation:    Automatic from 32 to 140°F (0 to +60°C) with a

                        variable ß from 0 to 3% per degree °C

  4-Ring Probe:         HI 76302 detachable with 1m cable (included)

  Battery:              4 x 1.5 volt(alkaline) Power socket for 12VDC supply

                        100 hours continuous use & auto-off after 10 minutes

  Environment:          32 to 122°F (0 to 50°C)

  Weight:               15 oz. (425g)

  Dimensions:           7.7 x 3.1 x 2.2" (196 x 80 x 57mm)

HI 9635 Waterproof, Auto-Ranging, ATC Conductivity/TDS/ºC Meter Professional Extensive conductivity and TDS range with the resolution automatically selected by the meter without pressing any key. Both conductivity (or TDS) and temperature are displayed at at the same time. User Friendly Large LCD with helpful graphic symbols and low battery warning. User replaceable probe. Easy calibration procedure with 3 memorized values (84, 1413, or 12880 µs/cm). Design & Construction Rugged lightweight ABS material, large tactile rubber keys , PVC probe for best field protection, stable on workbenches, lab desktops or slippery surfaces. Just One Probe HI 76302W measures any kind of sample from dionized water to brine with Automatic Temperature Compensation without requiring recalibration.

The new Hanna HI 9635 can measure conductivity, total dissolved solids and temperature, all with one probe. The temperature of all conductivity and TDS measurements is automatically or manually compensated for by the meter's ATC circuitry. The temperature coefficient is user selectable from 0.0 to 3.0% and the TDS factor can be set to 0.70 (F1) or 0.50 (F2).

The meter is constructed with a waterproof, rugged housing which allows the versatility required for both laboratory and field use. Moreover, HI 9635 is equipped with a large LCD that helps the user through operation and calibration with large comprehensive symbols. Besides displaying the measurements, the LCD simultaneously displays the temperature. The display gives a low battery warning and switches itself off after 10 minutes of non-use to save the batteries.

HI 9635 is supplied complete with HI 76302W conductivity probe with 3.3' (1 m) screened cable, 4 x 1.5V AAA batteries and instruction manual in a rugged carrying case.

	HI 933300 Portable, Microprocessor, ATC Conductivity Meter with built-in Printer & Datalogger Automatic Calibration HI 933300 performs calibration automatically on 5 different buffers at the touch of a button PC Compatible The meter can be connected to a PC through an infrared data transmitter HI 9200, to download data for storage, graphing, and other functions Low power Consumption HI 933300 is equipped with an automatic shut-off system and advanced electronics. It delivers up to 500 hours of use with 60 minutes measuring intervals. A 12 VDC socket is included for maximum versatility

HI 933300 is the first portable conductivity meter equipped with datalogging capability and a built-in printer. When the "logging" mode is activated, the meter records the conductivity and the temperature measurements with user-selectable interval from 1 to 180 minutes. The stored data can be printed directly or at a later time. It is also possible to download the stored data into a PC through HI 9200, with a standard RS232 serial port. HI 933300 can memorize up to 16,000 readings. The temperature coefficient ß is user-selectable from 0.0 to 3.0%/ ºC. HI 933300 is supplied complete with the ATC HI 76302 4-ring probe with 1 meter of cable ending in a sturdy DIN connector, calibration solution, paper rolls, and a practical rugged carrying case.

Specifications:

  Range:      µS/cm     0.0 to 150.0 µS/cm (µmho / cm)

              µS/cm     0 to 1500 µS/cm (µmho / cm)

              mS/cm     0.00 to 15.00 mS/cm (mmho / cm)

              mS/cm     0.00 to 199.9 mS/cm (mmho / cm)

              °C        0.0 to 60.0°C

  Resolution: µS/mS/°C  0.1 µS/cm; 1 µS/cm; 0.01 mS/cm; 0.1 mS/cm, 0.1°C

  Accuracy:             ±1% Full Scale; ±0.5°C

  Calibration:          Auto 1 point at 0,84,1.413,12.880 & 80.000 µS/cm

  Temp Compensation:    Auto 0 to 60°C with a variable ß from 0.0 to 3.0%/°C

  4-Ring Probe:         HI 76302 detachable with 1m cable (included)

  Printer:              Low-power impact type belt, using non-fading paper

  Logging Interval:     Selectable from 1,2,5,10,15,30,60,120 & 180 minutes

  Battery:              4 x 1.5V; 500 hours with 60 minute intervals

                        Power socket for 12VDC supply

  Environment:          32 to 122°F (0 to 50°C)

  Weight:               15 oz. (425g)

  Dimensions:           7.7 x 3.1 x 2.2" (196 x 80 x 57mm)

	HI 933301 Portable Microprocessor Conductivity Meter with Printer and Automatic Temperature Compensation Maximum Precision The HI 76302 4 ring-probe, automatic temperature compensation, and automatic calibration make HI 933301 a meter providing excellent accuracy No need for Thermal Paper The dot-matrix printer uses regular, non-fading paper. Replacement inexpensive paper is readily available (HI 92241/P) Low Power Consumption HI 933301 is equipped with an automatic shut-off system and advanced electronics. It delivers up to 500 hours of use with 60 minute measuring intervals. A 12 VDC socket is included for maximum versatility

HI 933301 adds to the speed and excellent specifications of Hanna conductivity meters, the option of printing the conductivity and the temperature data. The printing interval is user-selectable from 1 to 180 minutes, and the temperature coefficient ß can vary from 0.0 to 3%/ ºC. HI 933301 provides automatic temperature compensation, thanks to the supplied HI 76302 4-ring probe with integrated temperature sensor. The microprocessor-based meter provides automatic calibration with 5 memorized buffers: 0 µS/cm, 84 µS/cm, 1,413 µS/cm, 12,880 µS/cm and 80,000 µS/cm. This makes the calibration procedure extremely simple and quick.

Specifications:

  Range:      µS/cm     0.0 to 150.0 µS/cm (µmho / cm)

              µS/cm     0 to 1500 µS/cm (µmho / cm)

              mS/cm     0.00 to 15.00 mS/cm (mmho / cm)

              mS/cm     0.00 to 199.9 mS/cm (mmho / cm)

              °C        0.0 to 60.0°C

  Resolution: µS/mS/°C  0.1 µS/cm; 1 µS/cm; 0.01 mS/cm; 0.1 mS/cm, 0.1°C

  Accuracy:             ±1% Full Scale; ±0.5°C

  Calibration:          Auto 1 point at 0,84,1.413,12.880 & 80.000 µS/cm

  Temp Compensation:    Auto 0 to 60°C with a variable ß from 0.0 to 3.0%/°C

  4-Ring Probe:         HI 76302 detachable with 1m cable (included)

  Printer:              Low-power impact type belt, using non-fading paper

  Logging Interval:     Selectable from 1,2,5,10,15,30,60,120 & 180 minutes

  Battery:              4 x 1.5V; 500 hours with 60 minute intervals

                        Power socket for 12VDC supply

  Environment:          32 to 122°F (0 to 50°C)

  Weight:               15 oz. (425g)

  Dimensions:           7.7 x 3.1 x 2.2" (196 x 80 x 57mm)