Hanna pH Meters Pocket, Portable & Bench

PHep® - Waterproof pH Testers with Replaceable Electrode Cartridge Dual Level Display Showing pH & Temp. Percent Remaining Battery Indicator. Replaceable pH Electrode Featuring an Extendable Junction. Rugged, Floating Waterproof Casing. Automatic Calibration at standard as well as NIST Buffer Sets. Measurement Stability Indicator. pHep Series- ( HI 98127 pHep4 ) Testers: HI 98127 - HI 98128 pHep®4, pHep®5 pH Testers Dual Level Display Showing pH & ... Price  $77.00

DiST®- Waterproof EC/TDS/°C/°F Testers with Replaceable Electrode Dual Level Display. Battery Level Indicator. Replaceable Graphite Electrode. Rugged, Floating Waterproof Casing. Temperature in °C and °F. Automatic Temperature Compensation (ATC). Adjustable Temperature Coefficient Factor HI 9831 EC/TDS/Temp Tester- ( HI 98311 DIST5 ) Testers: DiST5 HI 98311 EC/TDS/Temp Tester Rugged, Floating Waterproof Casing Dual ... Price  $89.00

Combo - Waterproof pH / EC / TDS / °C / °F Testers with Replaceable Electrode Rugged, Floating Waterproof Casing. Temperature in °C and °F. Measurement Stability Indicator. Replaceable pH Electrode Featuring an Extendable Junction. Automatic pH Calibration at standard as well as NIST Buffer Sets. Automatic Temperature Compensation (ATC). Adjustable Temperature Coefficient Factor. HI 98130 Combo pH /EC/TDS/°C tester- ( Hi 98130 ) Testers: HI 98130 Combo Temperature in °C and °F Rugged, Floating Waterproof Casing ... Price  $144.00

HANNA pH POCKET METERS

pHeltm One Professional Electrode = One Pocket Meter! Accurate Measurements Electronics with the highest standards of quality guarantee excellent accuracy and outstanding repeatability Extra Long Battery Life With 3,000 hours of battery life, pHeltm and pHeltm1 can operate for up to 2 years without requiring battery replacement Simple Calibration Calibration through two dials on the back of the unit that can be easily adjusted with thumbnail or a coin Suggested Retail Price: pHeltm: $58.00; pHeltm1: $95.00(Valid only in USA)

If you have ever had problems with pocket meters due to their small and inexpensive electrodes or limited capabilities, pHel^tm is what you have always been looking for.

pHel^tm is supplied with a state-of the-art double junction full-size electrode. Double junction electrodes provide better and more stable results than standard electrodes, specially in unclean or varied samples. This means your pHel^tm's electrode is as good as a professional electrode, found only in top-of-the-line meters.

Unlike conventional testers, pHel^tm has a long and slim stem, making measurements in small samples or vials possible. pHel^tm1 is also gel-filled so that you do not have to worry about refilling the unit. A large Liquid Crystal Display allows reading of the pH value with a 0.1 pH resolution.

There are two models to choose from:

pHel^tm is literally a combination double junction pH electrode with a plastic, rugged body, resistant to temperatures up to 70°C and pressures of up to 1.5 BAR.

pHel^tm1 offers all the advantages of a glass body electrode with temperature resistance of up to 80°C and 3 BAR of pressure.

Add to the above a 3,000 hour battery life and you have a powerful hassle-free tool to help you with your daily pH tests. All this has been possible due to Hanna Instruments' advanced technology, ISO 9001 facilities and continuous effort and commitment in finding the most appropriate solution for your requirements.

pHel^tm & pHel^tm1 are supplied complete with 2 x 1.4V batteries and instructions.

pHel^tm is a Trademark of "Hanna Instruments"

	Checker®-Modern Substitute for Litmus Paper with Replaceable Electrode Large and easy-to-read LCD High accuracy with 0.01 pH resolution Two point fast and accurate calibration Usable with virtually any pH electrode Battery life: 3000 hours of continuous use Wide range: 0.00 to 14.00 pH Replaceable pH electrode Suggested Retail Price: Checker ®1: $34.50; Checker ®2: $54.90; Checker ®3: $54.90 (Valid only in USA)

At the cost of a few rolls of pH litmus paper, you can now have the industry's latest electronic pH tester. Checker^® supplies you with fast and accurate readings on a large LCD. Unlike other pH testers, the Checker^® electrode can be changed and any pH electrode of different shape or size can be used. Checker^® is also suitable for checking electrodes in pipes and tanks and various other industrial applications. The extended family of Checker^® pH testers now includes standard gel-filled electrodes with built-in BNC or screw-type connectors. Checker^® is supplied complete with electrode, 2 x 1.4V batteries and instructions. Order your Checker^® according to your needs and the type of electrode most suitable for your application:

• Checker^® 1 - Stick model Checker^® with replaceable HI 1270 screw-type, combination, pH electrode.
• Checker^®2 - Stick model Checker^® with replaceable HI 1207 professional full-length gel-filled pH electrode and screw-type connector.
• Checker^®3 - Stick model Checker^® B with replaceable HI 1208 professional full-length gel-filled pH electrode and BNC connector.

Checker^® is a registered Trademark of "Hanna Instruments"

	Take proper care of your hair & skin with the Skinchecktm! pH values displayed on large and easy-to-read LCD Contoured electrode specifically designed to measure pH of scalp, hair and skin Exceptionally long battery life: 3,000 hours of continuous use Compact and pocket-sized Suggested Retail Price: Skinchecktm: $149.50 (Valid only in USA)

The health and beauty industry has been searching for a professional product that can determine the pH value of scalp, hair strands and skin in a quick, accurate and inexpensive way.

Hanna Instruments is proud to introduce the Skincheck^tm, the first pH meter that makes it possible for you to easily measure pH. Skincheck^tm measures pH in just a few seconds with a special flat tip electrode. Skincheck^tm is an absolute must for: Hair Care Specialists, Beauty Salons, Cosmeticians, Beauticians, Dermatologists & The Cosmetic Industry

There are two models to choose from:

Skincheck^tm: The Stick version supplied with a short 2" (50 mm) replaceable electrode incorporating a screw connector, 2 x 1.4V batteries & instructions

Skincheck^tm1: The Extended version with a 3' (1 m) long cable and a replaceable electrode with BNC connector, 2 x 1.4V batteries & instructions

Skincheck^tm is a registered Trademark of "Hanna Instruments"

	The pH Tester Family Champ® - First pH meter that requires no calibration. Suggested Retail Price: $33.60 (Valid only in USA) pHep® - The standard in the world of pH testers. Suggested Retail Price: $36.00 (Valid only in USA) pHep+® - This tester combines all of the valuable features and specifications of the pHep® with Automatic Temperature Compensation. ATC measures the solution temperature and compensates for the effect on pH. This feature increases the accuracy, creating more exact results for your on-the-spot tests of pH levels.Suggested Retail Price: $39.50 (Valid only in USA)

The pH Tester Family The pHep®, introduced in 1986, is the smallest pH meter in the world. Measuring only 5.9" (15 cm) in height and weighing only 3 oz. (85 grams), it's the ideal tool for quick, on-the-spot testing of pH. The meter is basically an extension of the electrode with a large LCD that displays the measurement. The electrode is well protected in a sturdy reinforced casing. The meter comes with a protective cap that can also be used as the measurement vessel. Accurate, simple, sturdy, high-tech and inexpensive, these meters are today's answer to the inferior pH litmus paper of yesterday.

Specifications:

                            Champ®:           pHep®:            pHep+®:              

  Range:                0.0 to 14.0 pH    0.0 to 14.0 pH    0.0 to 14.0 pH

  Resolution:               0.1 pH            0.1 pH            0.1 pH 

  Accuracy:                ±0.5 pH           ±0.2 pH           ±0.1 pH

  Calibration:         Calibration free   Manual 1 point   Manual 1/2 point 

  Temp. Compensation:        N/A               N/A             Automatic 						

                                                              32 to 122°F

  Battery Type:          3 x 1.4 Volt      3 x 1.4 Volt       3 x 1.4 Volt  

  Battery Life:           700 hours         700 hours          700 hours 

  Environment:           32 to 122°F       32 to 122°F        32 to 122°F

  Dimensions:         5.9 x 1.2 x 0.9"  5.9 x 1.2 x 0.9"   5.9 x 1.2 x 0.9" 

  Weight:              3.0 oz. (85 g)    3.0 oz. (85 g)     3.0 oz. (85 g)

When Hanna Instruments introduced it's first version of the pHep (pH electronic paper) in 1986, it immediately revolutionized the standards in pH measurement. The pHep's ease-of-use in combination with its affordability made it possible for non-technical and technical personnel alike to accurately measure pH on the spot. Since then, over 1 million pHeps have gone to satisfied customers around the world. We have always valued your comments and suggestions and in this new series, we have included all the features you have asked for and more!

The waterproof pHep^® 4 and pHep^® 5 pH testers have a dual-level LCD that displays pH and °C or °F. At startup, pHep^® performs a self check then displays the remaining battery level to assure proper working condition. These testers also feature a stability indicator and hold feature to prompt the user when to take the reading & freeze the display for easy and accurate recording. These new pH/Temperature meters have a stainless steel temperature probe for faster and more precise temperature measurement and auto-compensation. 1 or 2 point calibration is made simple with automatic recognition of both standard and NIST buffer sets. We have designed the new pHep^® pH electrodes with an extendable reference junction and when the electrode finally is exhausted simply insert a new electrode cartridge!

Replaceable electrode cartridge featuring an extendable junction.

• pHep^® 4 (HI 98127) has the most common pH range of 0.0 - 14.0 pH
• pHep^® 5 (HI 98128) has a more precise pH range of 0.00 - 14.00 pH

pHep^® is supplied complete with 4 x 1.5V batteries, pH electrode (HI 73127) and electrode replacement tool (HI 73128).

	pHep® WATERPROOF-pH Electronic Paper Completely waterproof, can be fully immersed in water. Easy-to-read LCD. 700 hours of battery life. Automatic Temperature Compensation. Rugged, integral pH electrode in protective housing. Sealed protective cap can be filled with water to keep electrode activated and to prolong its life. Suggested Retail Price: pHep 1: $41.50; pHep 2 & pHep 3: $49.50 (Valid only in USA)

The new waterproof housings of the pHep® waterproof testers provide complete protection in outdoor applications, harsh industrial environments as well as accidental spills. This tester is ideal for swimming pools, fish farming, electroplating industry, printing, agriculture, waste water processing and many other applications where humidity and condensation would render litmus paper useless or ruin the circuitry of ordinary meters.

pHep®1 - Standard waterproof model with manual two point calibration and accuracy of ±0.2 pH

pHep®2 - Manual 2 point calibration & Automatic Temperature Compensation, accuracy ±0.1 pH

pHep®3 - The revolutionary micropHep®3. This "top of the range" pHep® brings even more benefits to the user. The auto switch-off feature prolongs the life of the batteries, delivering up to 700 hours of use. The display indicates when a stable pH value has been reached, ensuring that only accurate readings are taken. Calibration is automatic and can be performed easily, even by non-technical operators. Simply press the 'ON' button for 3 seconds, and the display prompts the user to submerge the tester into pH 7 buffer. After 20 seconds the display prompts immersion in the second buffer (4 or 10 pH). When that is completed, the meter is automatically calibrated and returns to operating mode.

pHep®3 also features:

• Microprocessor based with error and self-diagnostic messages.
• Last digit on display will flash until reading is stable.
• Automatic calibration - just press 'ON' button, dip in pH buffer and unit is calibrated.
• Auto shut-off after 10 minutes.

Specifications:

                         pHep1               pHep2              pHep3

  Range:           0.00 to 14.00 pH    0.00 to 14.00 pH    0.00 to 14.00 pH  

  Accuracy:              0.1 pH             0.1 pH              0.1 pH    

  Resolution:           ±0.2 pH            ±0.1 pH             ±0.1 pH 

  Calibration:           Manual             Manual            Automatic 

  Temp.Compensation:      N/A             Automatic           Automatic

  Battery:                               4 x 1.4 Volts

  Battery Life:                            700 hours              

  Environment Temp.:                 32 to 122°F (0 to 50°C)

  Weight:                                3 oz.(85 g)

  Dimensions:                 5.9 x 1.2 x 0.9"(150 x 30 x 24 mm)

	PICCOLO Breakthrough in pH technology With a resolution and accuracy of 0.01 pH, PICCOLO has the accuracy of a bench meter at the fraction of the cost. Battery operated and only 100 grams, PICCOLO measures pH wherever you need to. Just switch it on, immerse and read. The electrode has sealed electronics designed to cope with humid & dusty conditions and can be removed by simply sliding it off. A built-in temperature sensor and micro-circuitry provide automatic compensation. Piccolo has a 3.5" electrode. Piccolo 2 has a 6.3" electrode. Suggested Retail Price: Piccolo: $128.00; Piccolo 2: $139.00

PICCOLO The creation of PICCOLO by Hanna, is a response to today's industry. Piccolo is a revolutionary all-in-one pH meter with an "Electrode + Amplifier" design. The problem with conventional pH meters is the high impedance signal which makes the electrode, connector, cable and meter delicate and susceptible to noise, humidity and dirty environments. PICCOLO overcomes these problems with an interchangeable preamplified pH electrode that transmits a low impedance signal to the meter. Dual point calibration is performed simply through trimmers on the meter's casing. PICCOLO comes complete with an all-in-one electrode, a carrying case containing pH 4 and 7 buffer solution and a small calibration screwdriver.

Specifications:

  Electrode: Piccolo  HI 1280 Amplified with Temp. Sensor (included)

             Piccolo2 HI 1290 Amplified with Temp. Sensor (included)

  Range:              1.00 to 13.00 pH

  Resolution:         0.01 pH

  Accuracy:           ±0.01 pH

  Calibration:        Manual two point through Offset and Slope trimmers

  Temp. Compensation: Automatic from  32 to 158°F (0 to 70°C)

  Battery Type:       3 x 1.4 Volts

  Battery Life:       100 hours of continuous use

  Environment:        32 to 122°F (0 to 50°C)

  Weight:             14.1 oz. (400 g) complete with carrying case

Portable pH Meters

Interchangable probes Ergonomic design Automatic Temperature Compensation Portable pH Meters Bench pH Meters Application Specific Simulators and Calibrators

Over the past two decades, the measurement and use of pH has grown dramatically. This parameter has come out of the laboratory and is now being monitored in areas such as the environment, food, agriculture, horticulture, waste water, pharmaceutical, cosmetic industry, fish farming, metal finishing, education and anywhere quality is important. This enlargement of the use of pH has meant that every application with its own operating environment and tolerances requires specially designed products suitable to its needs. In addition, each market brings with it people with different backgrounds and technical training. Due to these market realities, Hanna has developed a complete range of meters, each catering to the specific needs of particular market segments. As a result, Hanna pH meters represent the most comprehensive range of portable and bench-top instrumentation on the market and provide the users with the most expansive choice possible.

Portable

HI 9214

-

•

-

•

-

•

-

-

-

•

-

-

-

-

-

-

-

-

-

-

-

-

HI 8010

•

-

-

•

-

-

-

-

•

-

-

-

-

-

-

-

-

-

-

-

-

-

HI 8014

•

-

-

•

•

-

-

-

•

-

-

-

-

-

-

-

-

-

-

-

-

-

HI 8314

•

-

-

•

•

•

-

-

•

-

-

-

-

-

-

-

-

-

-

-

-

-

HI 83141

•

-

-

•

•

•

-

-

•

-

-

-

-

-

-

-

-

-

-

-

-

-

HI 83140

•

-

-

•

•

•

-

-

•

-

•

-

-

-

•

-

-

-

-

-

-

-

HI 8915

•

-

-

•

•

•

-

-

•

-

-

-

-

-

-

-

-

-

-

-

-

-

HI 8424NEW

-

•

-

•

•

•

-

-

-

•

-

-

-

-

-

-

-

-

-

-

-

-

HI 991001

-

•

-

•

-

•

•

•

-

•

-

-

-

-

-

-

-

-

-

-

-

-

HI 991002

-

•

-

•

•

•

•

•

-

•

-

-

-

-

-

-

-

-

-

-

-

-

HI 991003

-

•

-

•

•

•

•

•

-

•

•

-

-

-

-

-

-

-

-

-

-

-

HI 9210N

•

-

-

•

-

•

-

•

•

-

-

-

-

-

-

-

-

-

-

-

-

-

HI 9024

•

-

-

•

-

•

•

•

-

•

-

-

-

-

-

-

-

-

-

-

-

-

HI 9025

•

-

-

•

•

•

•

•

-

•

-

-

-

-

-

-

-

-

-

-

-

-

HI 9026

-

•

-

•

•

•

•

•

-

•

•

•

•

-

-

-

-

-

-

-

•

-

HI 98140

-

-

•

•

-

•

•

•

-

•

-

-

-

•

-

•

•

-

•

-

•

•

HI 9815

•

-

-

-

-

-

-

-

-

•

-

-

-

-

-

•

-

-

•

•

-

-

HI 98150

-

-

•

•

•

•

•

•

-

•

-

-

-

•

-

•

•

-

•

-

•

•

HI 98160

-

-

•

•

-

•

•

•

-

•

-

-

-

•

-

•

•

-

•

-

•

-

HI 98230

-

-

•

•

•

•

•

-

-

•

-

-

-

•

-

•

•

•

•

•

•

•

HI 98240

-

-

•

•

•

•

•

-

-

•

-

-

-

•

-

•

•

•

•

•

•

•

pH 300 Series

The Beauty of Simplicity

CE

Compliance with the CE directives ensures the best reliability and accuracy of all meters manufactured by Hanna Instruments.

ISO

ISO 9000 standards cover different phases of the manufacturing process and are divided into three categories:

• ISO 9001 Standards covering R & D Design, Manufacturing, Quality Control and Customer Service; Hanna Instruments is an ISO 9001 certified company
• ISO 9002 Covering Manufacturing and Customer Service
• ISO 9003 Covering Quality Control and Customer Service

GLP

All models display graphic symbols and messages on the LCD to guide you through the calibration procedure. Calibration is automatic with programmed buffers, and an electrode stability indicator tells you when the reading is stable. Last calibration data, including date, time, offset and slope are memorized after each pH and ION concentration calibration. The data can be displayed or printed at any time at the touch of a button. With these features, these meters help you maintain your high quality of work at all times and meet Good Laboratory Practice requirements.

	pH 300 Bench-Top pH/mV/°C Meter GLP The calibration date and data are stored into non-volatile memory and can be easily recalled using the Last Calibration Data Recall Function Stability Indicator Prevents inaccurate calibrations PC Compatible Download in real time through the RS 232 port and Windows® compatible software Suggested Retail Prices: pH 300: $599.00* pH 300-KIT: $799.00*
*Valid only in USA

pH 300 is the basic model of the new 300 series and it is manufactured according to CSA, UL and CE standards. It features simplicity of use together with state-of-the-art engineering to measure pH, mV, ORP and temperature. Graphic symbols and messages appear on the LCD to guide the user step-by-step through the calibration procedure, which can be performed at 1 or 2 points by choosing from 3 memorized buffers (pH 4.01, 7.01 and 10.01). A "CFM" message blinks on the LCD until stability is reached, and only then can calibration be performed. This guarantees that only optimal calibrations are carried out. The calibration date (month, day and year) and data (offset and slope values) are stored into non-volatile memory, and can be easily recalled by the operator. Erroneous and inaccurate measurements due to a non-calibrated system can be avoided with the pH 300 last calibration data recall function, which warns the user in the case of an overdue calibration. With these features pH 300 meets the requirements of Good Laboratory Practice (GLP). Your work can be transferred into a computer via the opto isolated RS 232 communication port and with the aid of HI 92000, Hanna's user friendly Windows^® compatible software.

pH 300 is supplied ready-to-use, complete with glass body combination pH electrode, 12 VDC adapter, pH 4.01 and 7.01 calibration solutions (30mL each) and instruction manual.

pH 300-KIT in addition to the pH 300 basic accessories, the kit version includes a cantilever electrode holder, combination platinum ORP electrode, temperature probe, Windows^® compatible application software, PC connection cable, storage, cleaning and electrolyte solutions (30mL each) and a refilling pipette.

Specifications:

HI 4211 pH Single channel calibration check pH/mV/°C bench meter with dot-matrix LCD- ( HI 4211 Bench pH Meter ) pH Meters: HI 4211 Graphic Display pH Meter Simple to Use Interactive Menu System ... Price  $850.00

HI 4212 Dual channel calibration check pH/mV/°C bench meter with dot-matrix LCD- ( HI 4212 ) pH Meters: HI 4212 Graphic Display pH Meter Simple to Use Interactive Menu System ... Price  $1,150.00

Bench

HI 4211

-

•

-

•

•

-

•

•

-

-

•

•

-

•

-

•

•

-

•

HI 4212

-

•

-

•

•

•

•

•

-

-

•

•

-

•

-

•

•

-

•

pH 209

•

-

•

-

•

-

-

-

•

-

-

-

-

-

-

-

•

-

-

pH 209R

•

-

•

-

•

-

-

-

•

-

-

-

-

-

•

-

•

-

-

pH 210

-

•

•

-

-

-

•

•

•

-

-

-

-

-

-

-

•

-

-

pH 211

-

•

•

-

•

-

•

•

•

-

-

-

-

-

-

-

•

-

-

pH 211R

-

•

•

-

•

-

•

•

•

-

-

-

-

-

•

-

•

-

-

pH 212

-

•

-

•

-

-

•

•

•

-

-

-

-

-

-

•

•

-

-

pH 213

-

•

-

•

•

•

•

•

•

-

-

-

-

-

-

•

•

-

-

HI 110

-

•

•

-

-

-

•

•

-

•

-

•

-

•

-

-

•

-

-

HI 111

-

•

•

-

•

•

•

•

-

•

-

•

-

•

-

-

•

-

-

HI 112

-

•

-

•

-

-

•

•

-

-

•

•

-

•

-

•

•

-

-

HI 113

-

•

-

•

•

•

•

•

-

-

•

•

-

•

-

•

•

-

•

HI 221

-

•

•

-

•

-

•

•

•

-

-

-

•

•

-

•

•

-

•

HI 222

-

•

•

-

•

-

•

•

•

-

-

-

•

•

-

•

•

-

•

HI 223

-

•

-

•

•

-

•

•

•

-

-

-

•

•

-

•

•

-

•

HI 250

-

•

•

-

-

-

•

•

-

•

-

-

-

•

-

•

•

-

•

HI 251

-

•

•

-

•

-

•

•

-

•

-

-

-

•

-

•

•

-

•

HI 253

-

•

-

•

•

•

•

•

-

•

-

-

-

•

-

•

•

-

•

HI 254

-

•

-

•

•

-

•

•

-

-

•

-

-

•

-

•

•

-

•

HI 120

-

•

-

•

•

-

•

•

-

-

•

•

•

•

-

•

•

-

•

HI 121

-

•

-

•

•

•

•

•

-

-

•

•

•

•

-

•

•

-

•

HI 122

-

•

-

•

•

-

•

•

-

-

•

•

•

•

-

•

•

•

•

HI 123

-

•

-

•

•

•

•

•

-

-

•

•

•

•

-

•

•

•

•

HI 255

-

•

-

•

•

-

•

•

-

•

-

-

-

•

-

•

•

-

•

Application Specific

HI 99121

-

-

-

-

•

•

•

•

•

•

•

-

•

-

•

HI 99131

-

-

-

-

•

•

•

•

•

•

•

-

-

-

•

HI 99141

-

-

-

-

•

•

•

•

•

•

-

-

-

-

•

HI 99161

-

-

-

•

-

•

•

•

•

•

-

•

-

-

•

HI 99163

-

-

-

-

•

•

•

•

•

•

•

•

-

-

•

HI 99171

-

-

-

-

•

•

•

•

•

•

-

-

-

-

•

HI 99181

-

-

-

-

•

•

•

•

•

•

•

-

-

•

•

HI 98401

•

-

-

-

-

-

•

-

•

-

-

-

-

•

•

HI 931100

-

-

•

-

-

-

•

-

•

-

-

•

•

-

•

HI 931101

-

•

-

-

-

-

•

-

•

-

-

•

•

-

•

HANNA pH PORTABLE METERS

HI 9214 Microprocessor, ATC, Stick pH Meter Easy-to-operate. HI 9214 was designed with the user in mind, simple controls on the front panel make every operation easy and comprehensive. 3 Memorized Buffers. The meter automatically recognizes three buffer values (4.01,7.01,10.01pH) for simple 1 or 2 point calibration. Built in Temperature Sensor. The HI 1217S screw type electrode comes complete with a built-in temperature sensor. Accurate Thermometer. The built-in temperature sensor allows the HI 9214 to double as an accurate thermometer in the range of 0 to +70°C (32 to 158°F). Suggested Retail Price: $187.50 (Valid only in USA)

HI 9214 is a compact, hand-held, microprocessor-based pH meter designed to be carried anywhere it is necessary to measure pH and temperature instantly. The HI 1217S pH electrode has a built-in temperature sensor that measures temperature, and together with the aid of the microprocessor, performs Automatic Temperature Compensation. The meter has three memorized buffer values, (4.01, 7.01, 10.01) and automatic buffer recognition to avoid errors during calibration. There are no trimmers, making calibration an easy process, even for non-technical personnel. The electrode screws into the meter housing without the need for cables or separate temperature probes. The Ultem® body pH electrode is very rugged and will stand up to the effects of most chemicals in industry. HI 9214 is supplied complete with a soft carrying case and an HI 1217S plastic body, single junction, gel filled pH electrode with a built-in temperature sensor.

Specifications:

  Range:       pH     0.00 to 14.00 pH

               Temp   32 to 158°F (0.0 to +70.0°C)

  Resolution:  pH     0.01 pH

               Temp   1°F (0.1°C)

  Accuracy:    pH     ±0.02 pH

               Temp   ±0.5°C

  Calibration:        Automatic 2 point at pH 7.01, 4.01 or 10.01

  Temp. Compensation: Automatic from 32 to 158°F (0 to 70°C)

  pH Electrode:       HI 1217S combination, single junction, gel (included)

  Input Impedance:    10¹² ohms

  Battery:            1 x 9 volt (alkaline battery) 

  Battery Life:       100 hours of continuous use

  Environment Temp.:  32 to 122°F (0 to 50°C)

  Dimensions:         7.3 x 1.6 x 1.0" (185 x 42 x 26mm)

  Weight:             7.0 oz.(200 g) instrument alone

	HI 8014 The Ideal pH/mV Meter for Education Easy-to-operate. HI 8014 was designed with the student in mind, simple controls on the front panel make every operation easy & comprehensive. Manual Calibration. In order to illustrate the calibration process, manual trimmers allow the student to adjust the offset and slope characteristics. Large LCD. The large, easy-to-read display gives HI 8014 very clear readings in all ranges. Suggested Retail Price: $166.50 (Valid only in USA)

HI 8014 is an affordable pH meter ideally suited for the field of education. Measurements can be performed for both pH and REDOX (reduction/oxidation potential) with manual temperature compensation. The pH offset and slope are manually adjustable in order to display the calibration concept and the electrode characteristics to the students. The simple-to-use design includes a dial to select from OFF/ °C/ pH/ & mV. The simple calibration can be adjusted at any pH value and will remain valid even after the meter is turned off. HI 8014 is supplied complete with an HI 1332B rugged construction, refillable, plastic body, double junction combination, pH electrode.

Specifications:

  Range:       pH    0.00 to 14.00 pH

               mV    0 to 1999mV

  Resolution:  pH    0.01 pH

               mV    1 mV

  Accuracy:    pH    ±0.01 pH

               mV    ±1 mV

  Calibration:       Manual 2 point at any pH value by offset/slope trimmer

  Temp.Compensation: Manual from 32 to 212°F (0 to 100°C)

  pH Electrode:      HI 1332B combination, double junction (included)

  Input Impedance:   10¹² ohms

  Battery:           1 x 9 volt (alkaline battery) 

  Battery Life:      100 hours of continuous use

  Environment:       32 to 122°F (0 to 50°C)

  Dimensions:        7.1 x 3.3 x 1.6" (180 x 83 x 40 mm)

  Weight:            10 oz. (280 g) instrument alone 

                     1.3 lbs(520 g) with electrode

	HI 8314 ATC Portable pH/mV/°C Meter High Accuracy. HI 8314 is highly accurate in all three ranges, assuring the user of proper pH and temperature control. ATC. With the HI 7667 attached, the meter adjusts all pH readings for the effect of temperature. Easy Operation. The comprehensive front panel and easy to read display, make HI 8314 very easy to understand and operate. Accurate Thermometer. The independent temperature probe provides a fast response when measuring temperature. Suggested Retail Price: $197.50 (Valid only in USA)

HI 8314 is a portable, hand-held multi-purpose meter that combines accurate measurement of pH/ mV/ °C and ATC with a membrane keypad for simple operation. The comprehensive front panel allows the selection of pH, mV (REDOX), and temperature modes along with simple 2 point calibration through slope and offset trimmers. The large, easy-to-read LCD shows the readings with a symbol in the corner to indicate the mode. A low battery indicator will come on to alert the user of a low-power condition. The interchangeable electrode and temperature probe (supplied) are of the highest quality construction and assure the user of accurate measurements throughout their respective ranges. HI 8314 is supplied complete with an HI 1230B double junction, combination, gel, pH electrode, HI 7667 temperature probe. HI 8314 KIT with a rugged carrying case, pH 4 & 7 solutions and a calibration screwdriver is also available.

Specifications:

  Range:       pH     0.00 to 14.00 pH

               mV     0 to ±1999mV (ORP)

               Temp.  0.0 to 100.0°C

  Resolution:  pH     0.01 pH

               mV     1 mV

               Temp.  0.1°C

  Accuracy:    pH     ±0.01 pH

               mV     ±1 mV

               Temp.  ±0.4°C

  Calibration:        Manual 2 point through offset & slope trimmers.

  Temp. Compensation: Automatic from 0 to 70°C (32 to 158°F) or fixed at 

                      25°C with the probe detached.

  pH Electrode:       HI 1230B combination, double junction (included)

  Temp. Probe:        HI 7667 stainless steel temperature probe (included)

  Input Impedance:    10¹² ohms

  Battery:            1 x 9 volt (alkaline battery) 

  Battery Life:       100 hours of continuous use

  Environment Temp.:  32 to 122°F (0 to 50°C)

  Dimensions:         7.3 x 3.2 x 1.8" (185 x 82 x 45 mm)

  Weight:             10.3 oz. (290 g) instrument alone. 1.4 lbs (570 g)

                      complete with pH electrode and temperature probe

HI 8915 ATC, pH Meter with Recorder Output Recorder Output Terminals. The recorder output signal directly matches the pH, mV and temperature readings in mV. There is no need for conversion tables or charts. Automatic Temperature Compensation. Internal circuitry will adjust all readings for the natural effects of temperature. Mode Indicators. Symbols on the LCD will identify the current operational mode. Suggested Retail Price: $235.00 (Valid only in USA)

HI 8915 is a hand-held, portable pH meter with ATC, that combines accurate pH measurement with a recorder output capability. Two recorder output terminals on the front panel make it possible to attach a plotter or recorder directly to the meter for a hard copy of the measured elements. The large LCD displays a different indicator for each operational mode to identify the current measurements. Pressing the 'HOLD' key will freeze the reading on the display. Calibration is simply performed through two trimmers on the front panel. HI 8915 is supplied complete with the HI 1230B double junction, combination, gel, pH electrode and an HI 7669A temperature probe. HI 8314 KIT is also available containing a rugged carrying case, pH 4 and 7 buffers, and screwdriver.

Specifications:

  Range:       pH     0.00 to 14.00 pH

               mV     -1000 to +1000 mV

               Temp.  0.0 to 100.0°C

  Resolution:  pH     0.01 pH

               mV     1 mV

               Temp.  0.1°C

  Accuracy:    pH     ±0.01 pH

               mV     ±1 mV

               Temp.  ±0.5°C

  Recorder Output:                            

               mV/pH  100 mV/pH

               mV/mV  1mV/mV

               mV/C°  10mV/°C

  Calibration:        Manual 2 point through offset & slope trimmers

  Temp.Compensation:  Auto. from 32 to 158°F (0 to 70°C) or fixed at 25°C

                      with the probe detached.

  pH Electrode:       HI 1234B combination, double junction gel (included)

  Temperature Probe:  HI 7669A Stainless steel temp probe (included)

  Input Impedance:    10¹² ohms

  Battery Type/Life:  1 x 9 volt (alkaline)/100 hours of continuous use 

  Environment Temp.:  32 to 122°F (0 to 50°C)

  Dimensions:         7.3 x 3.2 x 1.8" (185 x 82 x 45 mm)

  Weight:             1.4 lbs (570 g) complete with electrode and probe

HI 8424 Microprocessor, ATC, pH/mV/°C Meter 0.1 mV Resolution. Necessary for ion selective electrodes. The first portable pH meter on the market with this resolution. Automatic Buffer Recognition. The meter will automatically recognize pH 4.01, 7.01 and 10.01 buffers. Simple 2 Point Automatic Calibration. Calibration is performed simply through the membrane keypad. The calibration data is then stored in the microprocessor's memory and will remain, even when the meter is off. 3 Meters in 1. pH, mV and temperature are all measured accurately by the HI 8424. Suggested Retail Price: $229.50 (Valid only in USA)

HI 8424 The same performance of a top-of-the-line microprocessor bench meter, can also be obtained with the HI 8424 portable pH meter, one of the most popular pH meters produced by Hanna. By utilizing an advanced microprocessor, HI 8424 is able to perform pH, ORP, ISE and temperature measurements with high accuracy and fast response. The mV measurements automatically switch from 0.1 to 1mV resolution when the reading reaches 400mV. Temperature effects are automatically compensated for, from 32 to 212°F (0 to 100°C) or can be manually compensated for on the control panel in the same range. The meter has three memorized buffer values, (4.01, 7.01, 10.01) and automatic buffer recognition to avoid errors during calibration. To make calibration even easier, the calibration trimmers have been removed and calibration is now performed at the push of a button. HI 8424 is supplied complete with an HI 1230B plastic body, double junction, gel, pH electrode, HI 7667 temperature probe. HI 8424 KIT is also available containing pH 4 and 7 buffers and a rugged carrying case.

Specifications:

  Range:       pH     0.00 to 14.00 pH

               mV     0.0 to ±399.9 mV (ISE)/ 0.0 to ±1999 mV (ORP)

               Temp.  0.0 to 100.0°C

  Resolution:  pH     0.01 pH

               mV     0.1 mV

               Temp.  0.1°C

  Accuracy:    pH     ±0.01 pH

               mV     ±0.2 mV

               Temp.  ±0.4°C

  Calibration:        Automatic 2 point with 3 memorized standard buffers

  Temp. Compensation: Automatic or Manual from 32 to 212°F (0 to 100°C)

  Electrode/inter-

  changeable probe:   HI 1230B electrode (included) HI 7667 probe (included)

  Input Impedance:    10¹² ohms

  Battery Type/Life:  1 x 9 volt (alkaline)/100 hours of continuous use

  Environment Temp.:  32 to 122°F (0 to 50°C)

  Dimensions:         7.3 x 3.2 x 1.8" (185 x 82 x 45 mm)

  Weight:             1.2 lbs (520 g) with pH electrode & temperature probe

HI 9622 Portable pH/mV/ºC Meter with Last Calibration Date (GLP) GLP (Good Laboratory Practice) The user can memorize the calibration date during the calibration procedure. This information can then be retrieved at will by simply pressing a button. mV Range HI 9622 can take ISE and ORP measurements by using the appropriate electrodes. The 0.1mV resolution, necessary for ion selective electrodes, automatically switches to 1mV when the reading reaches 400mV. Automatic Calibration The meter can be automatically calibrated at two points with microprocessor precision. Three buffer values (pH 4.01, 7.01 and 10.01) are memorized for automatic buffer recognition and calibration. Suggested Retail Price: HI 9622: $290.00 (Valid only in USA)

HI 9622 is a portable microprocessor-based pH meter with GLP (Good Laboratory Practice) capabilities. HI 9622 can memorize the last calibration date and show it at the touch of a button. This feature makes HI 9622 an ideal tool for applications such as quality control where instruments have to be in peak condition at all times, or when different operators use the same meter.

Automatic recognition of three buffers (pH 4.01, 7.01 & 10.01) and diagnostic messages complete the outstanding features of this easy-to-use instrument. In addition to pH, HI 9622 can also measure mV and temperature. The mV range allows ISE and ORP measurements and the mV resolution automatically switches from 0.1 to 1 when it reaches 400mV.

Temperature effects are automatically compensated for, from 32 to 212°F (0 to 100°C), or can be manually adjusted in the same range.

HI 9622 is supplied complete with HI 1230B combination gel double-junction pH electrode with BNC & 3.3' (1 m) cable, HI 7669/2W temperature probe with 3.3' (1 m) screened cable, 9V battery and instruction manual.

HI 931000 Read both pH and Temperature with One Rugged Electrode! 4-in-1 electrode for both pH and temperature. Stability Indicator. The stability indicator alerts the user when the electrode has stabilized. Automatic Buffer Recognition. The meter will automatically recognize pH 4.01, 7.01 and 10.01 buffers. Once calibrated, the data in the microprocessor's memory will remain, even when the meter is switched off. Automatic Temperature Compensation. Internal circuitry will adjust all readings for the temperature effect. Suggested Retail Price: $239.50 (Valid only in USA)

HI 931000 is a handy portable pH meter with a rugged, Ultem® pH electrode which reads both temperature and pH. In addition to the temperature sensor, the pH electrode also incorporates a miniaturized amplifier. This immediately amplifies and strengthens the pH sensor high impedance signal which in conventional pH meters is the cause of susceptibility to noise. The 4-in-1 interchangeable electrode therefore contains the pH sensor, reference system, temperature sensor and the amplifier module! The LCD incorporates a stability indicator to ensure that only correct measurements are taken. HI 931000 has been ergonomically designed to perfectly fit the palm of your hand. It can be operated with one hand and its rubber keypad is splash-proof. By simply pressing a button, the display switches from pH to temperature. Calibration is fast and automatic with the microprocessor retaining all the pH/ºC buffer values. HI 931000 is supplied complete with the HI 1217D Ultem®, gel-filled, 4-in-1 pH electrode, a wrist-strap for safety and a soft carrying case so that it can be carried anywhere. There is also an optional rubber boot (HI 710007) to make the instrument completely shockproof.

Specifications:

  Range:      pH      0.00 to 14.00 pH

              Temp.   0.0 to 70.0°C

  Accuracy:   pH      0.01 pH

              Temp.   0.1°C

  Resolution: pH      ±0.01 pH 

              Temp.   ±0.5°C

  Calibration:        Automatic at 2 point

  Temp. Compensation: Automatic from 32 to 158°F (0 to 70°C) 

  Electrode:          HI 1217D plastic, gel, pH electrode (included)

  Battery:            1 x 9 volt (alkaline battery) 

  Battery Life:       200 hours 

  Environment Temp.:  32 to 122°F (0 to 50°C)

  Weight:             11.3 oz. (320 g)

  Dimensions:         5.6 x 3.2 x 1.5" (143 X 80 X 38mm)

HI 9023C Waterproof, Microprocessor, ATC pH/mV/ºC Meter Waterproof Housing. The ABS housing provides the instrument with ultimate protection from industrial or harmful environments. 0.1 mV Resolution. Necessary for ion selective electrodes. One of the few portable pH meters on the market with this resolution. Automatic Buffer Recognition. The meter will automatically recognize pH 4.01, 7.01 and 10.01 buffers. Suggested Retail Price: HI 9023C $320.00; HI 9023CN: $279.00 (Valid only in USA)

HI 9023C The demand for instant results of on-field analyses has become a growing necessity. On-site measurements can subject instrumentation to the inclemency of the weather; adverse weather conditions, in fact associated with use in the field, often damage analytical instruments, rapidly deteriorating their performance and life. Due to these demands, Hanna Instruments has developed HI 9023 to satisfy all field application needs. By utilizing an advanced microprocessor, HI 9023 is able to perform pH, ORP, ISE and temperature measurements for a long period of time without the need for frequent battery changes. mV measurements automatically switch from 0.1 to 1mV resolution when the reading reaches 400mV. Temperature effects are automatically compensated for, from 32 to 212°F (0 to 100°C) or can be manually compensated for, on the control panel in the same range. The meter has three memorized buffer values, (4.01, 7.01, 10.01) and automatic buffer recognition to avoid errors during calibration. There are no trimmers, making calibration an easy process, even for non-technical personnel. HI 9023C is supplied complete with a carrying case containing an HI 1230B combination, double junction, gel, pH electrode, an HI 7669/2 temperature probe and pH 4 & 7 buffers. Upon request HI 9023CN model is available. HI 9023CN is supplied complete with a carrying case containing HI 1217D plastic, gel, combination pH electrode with built-in temperature sensor and amplifier (particularly suited for outdoor use).

Specifications:

  Range:       pH     0.00 to 14.00 pH

               mV     0.0 to ±399.9 mV (ISE)/ 0.0 to ±1999 mV (ORP)

               Temp.  0.0 to 100.0°C

  Resolution:  pH     0.01 pH

               mV     0.1 mV

               Temp.  0.1°C

  Accuracy:    pH     ±0.01 pH

               mV     ±0.2 mV

               Temp.  ±0.4°C

  Calibration:        Automatic with 3 memorized standard buffers.

  Temp. Compensation: Automatic or Manual from 32 to 212°F (0 to 100°C)

  pH Electrode:        

         HI 9023C     HI 1230B pH electrode (included)

         HI 9023CN    HI 1217D with temp. sensor & amplifier (included)

  Temperature Probe:  

         HI 9023C     HI 7669/2 temperature probe (included)

  Input Impedance:    10¹² ohms

  Battery:            4 x 1.4volt (alkaline batteries)

  Battery Life:       100 hours of continuous use

  Environment Temp.:  32 to 122°F (0 to 50°C)

  Dimensions:         7.7 x 3.1 x 2.4" (196 x 80 x 60 mm)

  Weight:             3.1 lbs (1.4 Kg) with carrying case and accessories

HI 9210N Waterproof, Microprocessor, ATC pH/mV/ºC Meter Simple 2-Button Operation. The meter has only two buttons, making it simple to use for even non-technical personnel. Manual Calibration. The calibration trimmers are sealed behind a protective cover. Once the meter is calibrated, the trimmers cannot be accidentally moved or readjusted by unauthorized personnel. Long Battery Life. 1200 hours of operation life guarantees maintenance free use without the need for frequent battery changes or re-chargers. Suggested Retail Price: $275.00 (Valid only in USA)

HI 9210N The increasing need for instant results on the production floor, without waiting for lab tests, and to minimize downtime, has become a necessity. On-site measurements in production and in agriculture, can subject the instrumentation to harsh conditions. The cold, humidity and dust associated with use in production, can damage a meter, rapidly deteriorating its performance and life. HI 9210N heavy-duty pH meter is designed to provide laboratory results and accuracy under harsh industrial conditions. Once the calibration is performed by authorized personnel, the trimmers are sealed behind a protective cover. This assures that the calibration cannot be tampered with. By incorporating only two buttons on the front panel, operation of this meter is simple, even for non-technical personnel. One button toggles the meter ON and OFF, and the other switches between the pH mode and the manual temperature set mode. The HI 9210N's battery life is approximately 1200 hours. The BEPS (Battery Error Prevention System) feature prevents the meter from taking false readings by shutting the meter off when the power is too low. In addition, a "V" appears on the screen to alert the user that there is only 20 hours of battery life left. HI 9210N is supplied complete in a soft carrying case with an HI 1217D pH electrode and a small calibration screwdriver.

Specifications:

  Range:       pH     0.00 to 14.00 pH

               Temp.  0.0 to 70.0 °C

  Resolution:  pH     0.01 pH

               Temp.  0.1°C

  Accuracy:    pH     ±0.02 pH

               Temp.  ±0.5°C

  Calibration:        Manual 2 point with offset & slope trimmers (sealed)

  Temp. Compensation: Automatic from 32 to 158°F (0 to 70°C)

  Electrode:          HI 1217D pH electrode L: 120mm x 12mm dia.(included)

  Battery:            4 x 1.5 volt AAA (alkaline batteries)

  Battery Life:       1200 hours of continuous use

  Environment Temp.:  32 to 122°F (0 to 50°C)

  Dimensions:         7.7 x 3.1 x 2.4" (196 x 80 x 60 mm)

  Weight:             2.2 lbs (1.0 Kg) complete with electrode & probe

HI 9024 & HI 9025 Waterproof, ATC pH/mV/ºC Meters with 5 Memorized Buffers Rugged, Waterproof Construction. The ABS housing provides the instrument with ultimate protection from harmful environments. Dual Level Display with Graphic Symbols. A dual level LCD displays pH or mV and temperature at the same time. Graphic symbols guide the user through the calibration process. 5 Memorized pH Buffer Values (4.01, 6.86, 7.01, 9.18, 10.01 pH). READY Function. The meter will only allow calibration when the electrode has stabilized. Suggested Retail Price: HI 9024C: $340.00; HI 9025C: $360.00 (Valid only in USA)

HI 9024 & HI 9025 are microprocessor-based pH meters in waterproof casings. HI 9024 measures pH & °C, and HI 9025 can also measure ion concentration and ORP in the mV range. Both meters are housed in rugged, waterproof, ABS casings that are built to last. The Auto-Instruction feature guides the user step-by-step through the calibration process with graphic symbols and 5 memorized, standard buffer values (pH 4.01, 6.86, 7.01, 9.18 and 10.01). Because the electrode requires a certain amount of time to stabilize between buffers, the meter will display the READY symbol only when the electrode has stabilized. Unlike conventional meters that only allow the calibration at 7.01pH, the powerful software of the HI 9024/9025 allows the user to start the calibration process using any of the 5 memorized buffers. It is also possible to calibrate the slope (second point of calibration) using any of the remaining buffers (example: 1st point of calibration = pH 4.01; 2nd point = pH 9.18). Both meters can calibrate with one buffer if 1 point calibration is desired. HI 9024/HI 9025 are supplied complete in a rugged carrying case containing an HI 1230B plastic, double-junction, combination, gel, pH electrode, an HI 7669/2W temperature probe, and pH 4 & 7 buffers.

Specifications:

                                 HI 9024                HI 9025 

  Range:      pH            0.00 to 14.00 pH       0.00 to 14.00 pH  

              mV(ISE)            ------                 ±399.9mV 

              mV(ORP)            ------                 ±1999mV

              Temp.          0.0 to 100.0°C         0.0 to 100.0°C

  Resolution: pH                 0.01pH                 0.01pH

              mV                 ------          0.1mV(ISE), 1mV(ORP)

              Temp.              0.1°C                  0.1°C

  Accuracy:   pH                ±0.01pH                ±0.01pH  

              mV                 ------        ±0.2mV(ISE), ±1mV (ORP)	 

              Temp.              ±0.5°C                 ±0.5°C 

  Calibration:             Automatic, 5 selectable standard buffers

  Temp.Compensation:   Automatic or Manual from 32 to 212°F (0 to 100°C)

  pH Electrode:                 HI 1230B pH electrode (included) 

  Temperature Probe:         HI 7669/2 Temperature Probe (included)

  Input Impedance:                           10¹²ohm  

  Battery:                              4 x 1.5 volt AAA

  Battery Life:                     70 hours of continuous use

  Environment Temp.:                  32 to 122°F (0 to 50°C)

  Dimensions:                   9.1 x 6.7 x 2.7" (230 x 170 x 70mm)

  Weight:                                 3.1 lbs (1.4 kg)

.

HI 9624 & HI 9625 Waterproof pH/mV/ºC Meters with built-in GLP GLP (Good Laboratory Practice) Both models provide for GLP to prevent errors and inconsistencies. Last Calibration data are automatically stored in memory and users can check date, time, offset and 2 slope values. IP 67 Classified Made of tough, lightweight ABS material, these waterproof, heavy-duty pH meters comply with the IP 67 standards. 12VDC Socket Whether you work in the lab or in the field, you can run the meter on batteries or external power. Both meters are equipped with a 12VDC socket for external power supply. Suggested Retail Price: HI 9624: $400.00* HI 9625: $420.00*

HI 9624 & HI 9625 present the latest series of Hanna pH metes offering all the benefits of GLP instrumentation in a waterproof housing. The calibration date (month, day and year) and data (offset and 2 slope values) are stored into a non-volatile memory, and can be easily retrieved at any time. Erroneous and inaccurate measurements due to a non-calibrated meter can be entirely avoided. For better accuracy and more convenience, both meters can be calibrated at 1, 2, or 3 points. With these features HI 9624 & HI 9625 fully meet the requirements of Good Laboratory Practice (GLP)

HI 9624 measures pH and temperature, with the pH measurements automatically compensated for temperature changes. In addition to the HI 9624 features, HI 9625 range has been extended to include mV so that ORP (Oxidation Reduction Potential) and ISE (Ion Specific) measurements can also be taken.

HI 9624 is supplied complete with HI 1230B combination gel double-junction pH electrode with BNC & 3.3' (1 m) cable, HI 7669/2W temperature probe with 3.3' (1 m) screened cable, 12VDC power adapter, pH 4.01, pH 7.01 and cleaning solutions (20 mL each) and 4 x 1.5V batteries in a rugged carrying case.
HI 9625 is supplied complete with HI 1230B combination gel double-junction pH electrode with BNC & 3.3' (1 m) cable, HI 7669/2W temperature probe with 3.3' (1 m) screened cable, 12VDC power adapter, pH 4.01, pH 7.01 and cleaning solutions (20 mL each) and 4 x 1.5V batteries in a rugged carrying case.

HI 96240 & HI 96250 Waterproof pH/mV/ºC Meters with RS 232/GLP GLP (Good Laboratory Practice) Last calibration data is automatically stored in memory and users can check date, time, offset and 2 slope values at any time by simply pressing a key. IP 67 Classified These meters comply with the IP 67 standards. They are dust-tight and protected against the effects of temporary immersion in water. PC Connection Both meters are equipped with a 5-pin RS232, making it possible to link them to a PC or data logger for further elaboration. Suggested Retail Price: HI 96240: $420.00* HI 96240-KIT: $490.00* HI 96250: $440.00* HI 96250-KIT: $595.00* *(Valid only in USA)

HI 96240 & HI 96250 are top-of-the-line portable pH meters. They come in a state-of-the-art waterproof housing with RS232 down-loading capabilities and meeting the GLP (Good Laboratory Practice) prerequisites. The calibration date (month, day and year) and data (offset and 2 slope values) are stored into non-volatile memory and can be easily retrieved by the operator. Erroneous and inaccurate measurements due to a non-calibrated unit can be avoided with the last calibration data recall function.

HI 96240 & HI 96250 can be connected to a PC through the RS232 port. In addition, with the HI 92000 Windows^® compatible application software, you can log the pH, °C, and mV (HI 96250 only) with date and time.

These meters are easy to use and simplify the task of frequent and repetitive monitoring, hence freeing staff for other tasks. Moreover, data can be stored or elaborated on by the most common spread sheet programs (for graphs, statistical analysis, etc.)

HI 96240 is supplied complete with HI 1230B combination gel double-junction pH electrode with BNC & 3.3' (1 m) cable, 4 x 1.5V AAA batteries in a rugged carrying case.
HI 96240-KIT comprises HI 96240 together with HI 92000 Windows ^® compatible applications software, HI 920011 PC connection cable, HI 7669/2W temperature probe with 3.3' (1 m) screened cable, 12VDC power adapter, and pH 4.01, pH 7.01, maintenance and cleaning solutions (30 mL each).
HI 96250 is supplied complete with HI 1230B combination gel double-junction pH electrode with BNC & 3.3' (1 m) cable, 4 x 1.5V AAA batteries in a rugged carrying case.
HI 96250-KIT comprises HI 96250 together with HI 92000 Windows ^® compatible applications software, HI 920011 PC connection cable, HI 3230B platinum, gel, plastic body ORP electrode with 3.3' (1 m) cable, HI 7669/2W temperature probe, 12VDC power adapter, and pH 4.01, pH 7.01, maintenance and cleaning solutions (30 mL each).

Windows ^® is a trademark of "Microsoft Co."

HI 9224 Breakthrough in Technology: Hard Copy of pH and Temperature for ISO and Quality Requirements Low Power Consumption. HI 9224 delivers up to 70 hours of use with 5 minute printing intervals. Meter uses common AA batteries. A 12VDC power supply can also be used to power the meter. No Need for Thermal Paper.Belt-type printer uses regular, non-fading paper. Inexpensive replacement paper is also available (Replacement part # HI 92241/P). 3 Memorized Buffers. Meter memorizes the values for pH 4.01, 7.01, and 10.01 and uses automatic buffer recognition. Suggested Retail Price: HI 9224: $475.00; HI 9224D: $495.00

HI 9224 is the first portable, printing pH meter in the world. Housed in a rugged, hand-held casing with a splash-proof keyboard and weighing less than 1 pound (500 grams), this meter can be carried anywhere in the lab or in the field for on-the-spot recording. Recording interval is set at 5 minutes. The print-out supplies the user with the interval, lot #, temperature and pH value. Measurements can be performed with lab-grade precision in the field as well as in the laboratory without compromising accuracy (±0.01 pH and ±0.5°C accuracy). Three memorized buffers (4.01, 7.01 & 10.01 pH) with automatic buffer recognition make calibration simple. In addition, calibration is reduced to a push-button operation. For long term field or lab applications, the HI 9224 can be connected to a 12VDC battery recharger. This flexibility will allow your testing to continue even if there is a power failure. By using advanced technology and state-of-the-art electronics Hanna offers the HI 9224 at a fraction of the cost of a typical recorder. HI 9224 is supplied complete with an HI 1230B plastic body, double junction pH electrode, an HI 7669/2 temperature probe and a rugged carrying case (PKGCASE). Upon request, model HI 9224D is available. HI 9224D is supplied complete with an HI 1217D plastic, gel, combination pH electrode with built-in temperature sensor and amplifier.

Specifications:

  Range:       pH     0.00 to 14.00 pH

               Temp.  0.0 to 100.0 °C

  Resolution:  pH     0.01 pH

               Temp.  0.1°C

  Accuracy:    pH     ±0.01 pH

               Temp.  ±0.5°C

  Calibration:        Automatic 1, 2 or 3 point with 3 memorized buffers

  Temp. Compensation: Automatic from 32 to 212°F (0 to 100°C) or fixed at

                      25°C with temperature probe detached

  pH Electrode: 9224  HI 1230B gel, double-junction (included)

                9224D HI 1217D with temp. sensor & amplifier (included)

  Temp. Probe:  9224  HI 7669/2 temperature probe (included)

  Input Impedance:    10¹² ohms

  Logging Interval:   Selectable from 1,2,5,10,15,30,60,120 & 180 minutes

  Printer:            Low-power impact belt-type, 14 characters/line

  Printing Interval:  5 minutes

  Battery:            4 x 1.5 volt AA (alkaline batteries)

  Battery Life:       500 hours without printing/ socket for 12VDC supply

  Environment Temp.:  32 to 122°F (0 to 50°C)

  Dimensions:         8.7 x 3.2 x 2.6" (220 x 82 x 66mm)

  Weight:             Complete Kit: 3.1 lbs (1.4 Kg)

HI 92240 Printing & Logging pH Meter: Recording up to 8,000 Data with Continuous Monitoring Logging Capacity. Up to 8,000 individual readings can be stored in the meter's memory. Computer Compatible. Cordless infrared transmission to the HI 9200 RS 232 receiver requiring no extra cables. Low Power Consumption. HI 92240 will deliver up to 500 hours when used at 60 minute logging intervals. A 12 VDC power supply can also be used for long term logging. No Need for Thermal Paper. Printer operates with plain paper, HI 92241/P replacement number. Suggested Retail Price: HI 92240: $575.00; HI 92240D: $595.00

HI 92240 is the first portable, printing & logging pH meter available. With all of the features of the HI 9224, this meter adds to its bevy of benefits, an extensive logging function. When in logging mode, the meter stores the measurements at a user selected interval from 1 to 180 minutes. This information can be retrieved at a later date for printing or it can be transferred to a computer through infrared transmitters. The internal software allocates memory space to store up to 8,000 measurements. The battery will last for 500 hours when the meter is logging every 60 minutes. The meter can also accept the power from a 12 VDC battery charger. An optional HI 9200 transmitter can be connected to your computer's RS232 port. The HI 92240 will transfer its data in seconds through the infrared lights, no need for connecting cables between the transmitter and the meter. HI 92240 is supplied complete with an HI 1230B plastic body, gel, double junction pH electrode, an HI 7669/2 temperature probe and a rugged carrying case (PKGCASE). Upon request HI 9224D model is available. HI 9224D is supplied complete with an HI 1217D plastic, gel, combination pH electrode with built-in temperature sensor and amplifier.

Specifications:

  Range:       pH     0.00 to 14.00 pH

               Temp.  0.0 to 100.0 °C

  Resolution:  pH     0.01 pH

               Temp.  0.1°C

  Accuracy:    pH     ±0.01 pH

               Temp.  ±0.5°C

  Calibration:        Automatic 1, 2 point with 3 memorized buffers

  Temp. Compensation: Automatic from 32 to 212°F (0 to 100°C) or fixed at 

                      25°C with temperature probe detached

  Electrode:   92240  HI 1230B double-junction, pH electrode (included) 

               92240D HI 1217D temp. sensing/amplified electrode (included)

  Temp. Probe: 92240  HI 7669/2 temperature probe (included)

  Input Impedance:    10¹² ohms

  Logging Interval:   Selectable from 1,2,5,10,15,30,60,120 & 180 minutes

  Printer:            Low-power impact belt-type, 14 characters per line

  Battery:            4 x 1.5 volt AA (alkaline batteries)

  Battery Life:       500 hours without & 1 hour with printing/

                      power socket for 12 VDC supply

  Environment Temp.:  32 to 122°F (0 to 50°C)

  Dimensions:         8.7 x 3.2 x 2.6" (220 x 82 x 66mm)

  Weight:             Complete Kit: 3.1 lbs (1.4 Kg)

Bench-Top pH Meters

HANNA pH BENCH TOP METERS

HI 8519 Low Cost pH/ mV Bench Meter Tailor-Made for Students. Oriented for Simplicity. HI 8519 was built around the idea of simplicity with a large LCD, easy-to-operate knobs, and a pH/temperature chart on the front panel. Rugged Design. ABS plastic offers superior protection for the meter's electronics. Manual Calibration. In order to illustrate the calibration process, manual potentiometers allow the user to adjust the offset & slope characteristics. Suggested Retail Price: $295.00

HI 8519 A construction of rugged ABS plastic with sturdy knobs and a reference chart for pH and temperature on the front panel make HI 8519 an ideal meter for students. The keypad has membrane keys for changing the mode and knobs for slope and offset calibration. The pH offset and slope are manually adjustable in order to display the calibration concept and the electrode characteristics to the students. Measurements can be performed for both pH and REDOX (Reduction Oxidation Potential) with manual temperature compensation. The LCD displays the temperature comprehensively while manually compensating for its effects. Practicality, simplicity and comprehensive operating procedures in addition to an affordable price make this meter one of the most popular, basic pH meters available today. HI 8519 is supplied complete with an HI 1332B plastic body, double junction, refillable pH electrode, 12 VDC adapter and a durable dust cover.

Specifications:

  Range:        pH    0.00 to 14.00 pH

                mV    0 to ±1999mV

  Resolution:   pH    0.01 pH

                mV    1 mV

  Accuracy:     pH    ±0.01 pH

                mV    ±1 mV

  Calibration:        Manual 2 point through offset and slope knobs

  Temp.Compensation:  Manual from 32 to 212°F (0 to 100°C)

  pH Electrode:       HI 1332B double junction, refillable (included)

  Input Impedance:    10¹² ohms

  Power:              12 VDC power supply (CSA & UL approved)

  Environment Temp.:  32 to 122°F (0 to 50°C)

  Dimensions:         9.1 x 6.7 x 2.7" (230 x 170 x 70 mm)

  Weight:             2.9 lbs (1.3 kg)

HI 8520 & HI 8521 Microprocessor, ATC, Bench pH Meters Ideal for Q.C. Microprocessor-Based Accuracy. 3 memorized buffers (pH 4.01, 7.01 and 10.01) with automatic buffer recognition. Trouble-Shooting Made Easy. Error codes make problem solving quick & simple. Ideal for the QC Laboratory. The simple to use design and rugged construction make HI 8520/HI 8521 perfect for QC labs. Suggested Retail Price: HI 8520: $320.00; HI 8521: $340.00

HI 8520 & HI 8521 By utilizing an advanced microprocessor, HI 8521 is able to perform pH, ORP, ISE and temperature measurements with high accuracy and fast response. mV measurements automatically switch from ISE to ORP when the reading reaches 400mV. Temperature effects are automatically compensated for, from 32 to 212°F (0 to 100°C) or can be manually compensated for, on the control panel in the same range. The meter has three memorized buffer values, (4.01, 7.01, 10.01) and automatic buffer recognition to avoid errors during calibration. HI 8520 has all the same features of HI 8521, but without the mV range. HI 8520 and HI 8521 are both supplied complete with the HI 1332B plastic body, double junction, refillable pH electrode, HI 763 temperature probe with 1 meter (3.3') cable and a dust cover. Upon request HI8520NLP & HI8521NLP versions are available with power socket for 12 VDC supply (CSA & UL approved).

Specifications:

                                 HI 8520                HI 8521     

  Range:      pH            0.00 to 14.00 pH       0.00 to 14.00 pH  

              mV(ISE)            ------                 ±399.9mV 

              mV(ORP)            ------                 ±1999mV

              Temp.          0.0 to 100.0°C         0.0 to 100.0°C

  Resolution: pH                 0.01pH                 0.01pH

              mV                 ------          0.1mV(ISE), 1mV(ORP)

              Temp.              0.1°C                  0.1°C

  Accuracy:   pH                ±0.01pH                ±0.01pH  

              mV                 ------        ±0.2mV(ISE), ±1mV (ORP)	 

              Temp.              ±0.4°C                 ±0.4°C 

  Calibration:           Automatic 2 point with auto-buffer recognition

  Temp.Compensation:    Automatic or Manual from 32 to 212°F (0 to 100°C)

  pH Electrode:          HI 1332B combination pH electrode (included) 

  Temperature Probe:         HI 763 Temperature Probe (included)

  Input Impedance:                            10¹²ohm              

  Power: 8520/8521             240/220/110 V 50/60 Hz max power 10 W

         8520NLP/8521NLP             12 VDC (CSA & UL approved)

  Environment Temp.:                  32 to 122°F (0 to 50°C)

  Dimensions:                   9.1 x 6.7 x 2.7" (230 x 170 x 70mm)

  Weight:                                 3.1 lbs (1.4 kg)

	HI 8417 Microprocessor, ATC, pH Meter with Dual LCD Multi-Range Bench Meter. HI 8417 has 3 different measurement ranges (pH, mV, and temperature). Dual LCD for Easy Operation. The dual display with temperature and pH/mV makes calibration and operation simple. Warning symbols for Buffer Selection. The LCD will flash a code if the buffer selected is not valid in the process. 5 Memorized pH buffers. The microprocessor recognizes pH 4.01, 6.86, 7.01, 9.18, and 10.01 buffer value for NBS or Technical standards. Recorder Output. The meter can communicate with a plotter or other recording device through a mV output. Suggested Retail Price: $395.00

HI 8417 is a microprocessor based pH meter with dual LCD showing temperature and pH simultaneously so that it is possible to monitor both parameters at the same time. The microprocessor allows for Automatic or Manual Temperature Compensation and also uses 5 pre-programmed buffer values to ease calibration. Two-point calibration is performed through the membrane keypad, and appropriate buffer values are indicated by symbols on the LCD. Automatic buffer recognition simplifies the calibration process. A mV recorder output is also incorporated into HI 8417 to make data transfer possible. HI 8417 is supplied complete with an HI 1131B glass-body pH electrode, HI 763 temperature probe and a dust cover. Upon request, version HI 8417NLP is also available with power socket for 12 VDC supply (CSA & UL approved).

Specifications:

  Range:      pH      0.00 to 14.00 pH

              mV      0 to ±399.9 mV (ISE); 0 to ±1999 mV (ORP)

              Temp.   0 to 100°C (Manual) ; -10 to +125°C (Automatic)

  Resolution: pH      0.01 pH

              mV      0.1mV/1 mV

              Temp.   0.1°C

  Accuracy:   pH      ±0.01 pH

              mV      ±0.2 mV / ±1 mV

              Temp.   ±0.5°C

  Calibration:        Auto. 2 point with automatic buffer recognition

  Temp. Compensation: Manual from 32 to 212°F (0 to 100°C) Automatic 

                      from 14 to 257°F (-10 to +125°C)

  pH Electrode:       HI 1131B Glass combination pH electrode (included) 

  Temperature Probe:  HI 763 Temperature Probe (included)

  Input Impedance:    10¹² ohms

  Power:  HI 8417     240/220/110 Volts ±15% 50/60 Hz max power: 10W

          HI 8417NLP  power socket for 12 VDC supply (CSA & UL approved)

  Recorder Output:    1mV/0.01 pH or mV/mV

  Environment Temp.:  32 to 122°F (0 to 50°C)

  Dimensions:         9.1 x 6.7 x 2.7" (230 x 170 x 70 mm) 

  Weight:             3.1 lbs (1.4 kg)

HI 9017 PC Compatible, Microprocessor, Bench pH Meter Pre-Programmed. 6 memorized programs are tailor-made for your applications and help increase efficiency. Programmable Buffer Values. You can calibrate the meter with the buffer value that most suits your sample range. Computer Compatible. Simply interface the meter with any PC through the universal RS232 port, and data will be transferred instantly. Dual LCD. pH/mV and temperature are displayed simultaneously on two LCDs. Suggested Retail Price: $520.00

HI 9017 This PC compatible bench meter is powered by a microprocessor that enables you to measure pH, mV (ISE & ORP ranges) and temperature with the accuracy and reliability you expect from Hanna Instruments. An acoustic alarm in all 3 ranges will alert you when the preset limits or the end points have been reached. You can now concentrate on other tasks and be alerted when your attention is needed. This unique feature will greatly help you in the simulation of chemical reactions such as in the field of biotechnology. The pH meter can be calibrated with any pH buffer, an important feature when working with highly acidic or alkaline samples. The RS232 interface will allow you to connect the meter to your computer and download information for elaboration or reproduction. Other features include: ATC, 6 programs and 3 memorized buffer values for automatic calibration. HI 9017 is supplied complete with a starter kit including the HI 1131B glass body, combination pH electrode, an HI 7667R temperature probe, HI 76405 cantilever electrode holder, pH 4, pH7 and electrolyte solutions and a dust cover.

Specifications:

  Range:      pH        0.00 to 14.00 pH 

              mV        ±399.9 mV (ISE) / ±1999 mV (ORP)

              Temp.     -10.0 to +125.0°C

  Resolution: pH        0.01pH

              mV        0.1 mV / 1mV

              Temp.     0.1°C

  Accuracy:   pH        ±0.01pH

              mV        ±0.2mV / ±1mV

              Temp.     ±0.5°C

  Calibration:          Automatic 2 point with 3 memorized buffers or 

                        at any given pH value

  Temp.Compensation:    Automatic or manual from  32 to 257°F (-10 to 125°C)

  Electrode:            HI 1131B Glass combination pH electrode (included)

  Temperature Probe:    HI 7667R Temperature Probe (included)

  Input Impedance:      10¹²ohm              

  Computer Interface:   RS232

  Power:                240/220/110 Volts ±15%, 50-60 Hz, Max power 10W

  Environment Temp.:    32 to 122°F (0 to 50°C)

  Dimensions:           9.1 x 6.7 x 2.7" (230 x 170 x 70mm)

  Weight:               2.9 lbs (1.3 kg); KIT with holder:  7 lbs (3.2 Kg)

HI 9321 & HI 931400 Microprocessor pH/mV/ºC Meters with 5 Memorized pH Buffers Dual-Level LCD with Graphic Symbols. A large LCD displays pH/mV and temperature at the same time. Graphic symbols guide the user through the calibration process. 5 Memorized pH Buffer Values. The Technical Standard buffers of 4.01, 7.01, 10.01 as well as the NBS (NIST) to 6.86 and 9.18 pH buffer. User-Friendly Front-Label. Graphically designed and appealing label contains abridged instructions to use the meter. READY Function. The meter will only allow calibration when the electrode has stabilized. Suggested Retail Price: HI 9321: $395.00; HI 931400: $499.00

HI 9321 and HI 931400 measure pH and temperature as well as ISE and ORP in the mV range. HI 931400 is also equipped with an RS232 port. The Auto-Instruction feature guides the user step-by-step through the calibration procedure with graphic symbols. Unlike conventional pH meters that offer only the standard buffers of 4.01, 7.01 and 10.01, these meters also allow calibration at the important NBS (NIST) buffers of 6.86 and 9.18. Since the electrode requires a certain amount of time to stabilize between buffers, the meter will not display the READY symbol until the electrode has stabilized. With the READY feature, you are assured of your calibration being correct which means all your subsequent measurements are accurate too. The powerful software of the HI 9321 and HI 931400 allows calibration with any of the 5 memorized buffers. It is also possible to calibrate the slope (second point of calibration) using any of the remaining buffers. Both meters are supplied complete with a starter kit including the HI 1131B glass body, combination pH electrode, HI 7669/2 stainless steel temperature probe, HI 76405 cantilever electrode holder, pH 4, pH 7 and electrolyte solutions and a dust cover. Also available, is version HI 931400NLP with power socket 12 VDC supply (CSA & UL approved).

Specifications:

  Range:      pH      0.00 to 14.00 pH

              Temp.   0.0 to 100.0°C

              mV      ±399.9mV(ISE); ±1999mV (ORP)

  Accuracy:   pH      0.01 pH

              Temp.   0.1°C

              mV      0.1mV (ISE) ; 1mV (ORP)

  Resolution: pH      ±0.01 pH 

              Temp.   ±0.5°C 

              mV      ±0.2mV (ISE); 1mV (ORP)

  Calibration:        Automatic 

  Temp. Compensation: Automatic from 32 to 212°F (0 to 100°C) 

  pH Electrode:       HI 1131B glass body, combination (included) 

  Temperature Probe:  HI 7669/2 Temperature Probe (included)

  Environment Temp.:  32 to 122°F (0 to 50°C)

  Weight:             4 lb (1.8 Kg)

  Dimensions:         9.1 x 6.7 x 2.7" (230 X 170 X 70mm)

HI 9318 Programmable Printing pH Bench-Meter Computer Compatible. Simply interface the meter with any PC through the universal RS232 port, and data will be transferred instantly. Pre-Programmed. 9 memorized programs are tailor-made for your applications and help increase efficiency. No Need for Thermal Paper. Dot-matrix printer uses regular, non-fading paper. Inexpensive replacement paper is available. Suggested Retail Price: $699.00

HI 9318 is a powerful printing pH meter with 3 LCDs for pH, temperature, mV, date and time. HI 9318's built-in printer provides instructions to guide the user through each step in the chosen process (For example: Select your language from English, French, German, Italian, Spanish or Swedish). This is a unique Hanna feature that makes this user-friendly meter simple to operate for all personnel, from non-technical staff to R&D technicians. This meter is designed for those routine tests that need to be monitored closely and accurately in order to maintain optimum efficiency. Other features such as automatic buffer recognition (4.01, 7.01, 10.01 and custom values), RS232 interface, sample counter, date, time, acoustic alarm and print-outs at user selectable intervals make HI 9318 an indispensable asset in today's laboratory. HI 9318 is supplied complete with a starter kit including an HI 1131B refillable glass-body pH electrode, an HI 76405 electrode holder, an HI 7669/2 temperature probe, 5 rolls of printer paper (HI 84181/P), pH 4 and pH 7 buffer solutions, electrolyte solutions and a durable dust cover.

HI 9318 comes with 9 programs:

• Program 1: Allows the user to set sample #, time and date. Values entered into this program are kept in memory even when other programs are used.
• Program 2: Lets user calibrate with buffer values other than the standard (4.01, 7.01 & 10.01) that are pre-programmed into memory.
• Program 3: Prints the offset and slope characteristics of the pH electrode to ensure good working status.
• Program 4: Prints pH/mV and temperature values at selectable intervals from 1 minute to 1 hour for a definable period of time.
• Program 5: Prints pH/mV and temperature values at desired intervals from 1 minute to 1 hour up to a selectable pH/mV end point.
• Program 6: Allows user to set upper and lower limits that will sound a buzzer when exceeded, ideal for use in titration.
• Program 7: Selects working language (English, French, German, Italian, Spanish or Swedish).
• Program 8: Prints the ion-concentration (equivalent).
• Program 9: Allows user to enter the RS232 interface of the computer.

Specifications:

  Range:      pH      0.00 to 14.00 pH

              Temp.   -10.0 to 125.0°C

              mV      0 to ±399.9mV(ISE);0 to ±1999mV (ORP)

  Accuracy:   pH      0.01 pH

              Temp.   0.1°C

              mV      0.1mV (ISE) ; 1mV (ORP)

  Resolution: pH      ±0.01 pH 

              Temp.   ±0.5°C 

              mV      ±0.2mV (ISE); 1mV (ORP)

  Calibration:        Automatic at pH 4,7 & 10 (25°C); variable in program 2

  Temp. Compensation: Automatic from 14 to 257°F (-10 to 125°C) 

  pH Electrode:       HI 1131B glass body, combination (included) 

  Temperature Probe:  HI 7669/2 temperature probe (included)

  Environment Temp.:  32 to 122°F (0 to 50°C)

  Weight:             7lb (3.2 Kg)

  Dimensions:         9.1 x 6.7 x 2.7" (230 X 170 X 70mm)

HI 9219 Printing pH Bench Meter with Stability Indicator Electrode Stability Indication. A ready indicator prompts the user to obtain a print-out only when the electrode has stabilized. No Need for Thermal Paper. Dot-matrix printer uses regular, non-fading paper. Inexpensive replacement paper is available. RS232 PC Interface. The meter can be connected to a standard RS232 serial port for data transfer into a computer system. Suggested Retail Price: $625.00

HI 9219 When accuracy and stability are essential to your laboratory tests, HI 9219 will supply you with the best results. This bench-top meter provides you with pH and temperature readings simultaneously and features a unique stability indicator. When the pH electrode stabilizes in the sample, the 'NO' on the LCD, changes to 'YES'. This indicates that the reading is correct and can be recorded. The operator can then proceed with printing the data. HI 9219 also prints a complete set of calibration instructions for the user. Using automatic buffer recognition, it identifies pH 4.01, 7.01 and 10.01 values for simple and quick calibration. The print-outs of the HI 9219 include valuable information such as time, date, temperature, and pH reading. These print-outs are a must for Q.C. and research labs that abide by strict regulations and guidelines. HI 9219 is supplied with a computer compatible RS232 serial port. This port is ideal for transferring information into a PC for elaboration or research purposes. HI 9219 is supplied complete with a starter kit including the HI 1131B glass body pH electrode, HI 76405 electrode holder, HI 7669/2 temperature probe, pH 4 and pH 7 buffer solutions, electrolyte solutions, 5 rolls of printer paper (HI 84181) and a durable dust cover.

Specifications:

  Range:      pH        0.00 to 14.00 pH 

              Temp.     0.0 to +100.0°C

  Resolution: pH        0.01pH

              Temp.     0.1°C

  Accuracy:   pH        ±0.01pH

              Temp.     ±0.5°C

  Calibration:          Automatic 2 point with 3 memorized buffers

  Temp.Compensation:    Automatic or manual from  32 to 212°F (0 to 100°C)

  Electrode:            HI 1131B Glass combination pH electrode (included)

  Temperature Probe:    HI 7669/2 Temperature Probe (included)

  Input Impedance:      10¹²ohm              

  Printer:              Dot-matrix, 14 characters/line using plain paper

  Power:                240/220/110 Volts ±15%, 50-60 Hz, Max power 10W

  Environment Temp.:    32 to 122°F (0 to 50°C)

  Dimensions:           9.1 x 6.7 x 2.7" (230 x 170 x 70mm)

  Weight:               2.9 lbs (1.3 kg); KIT with holder:  7.4 lbs (3.4 Kg)

HI 931401 Resolution of 0.001 pH and 0.1ºC on a Large Dual Level LCD 0.000 to 14.000 pH. User selectable resolution between 0.001 & 0.01. RS232PC Interface. The meter can be connected through a standard RS232 serial port to a PC computer for data transfer. Dual LCD with Graphic Symbols. A dual LCD displays pH/mV and temperature at the same time. Graphic symbols guide the user through the calibration process. READY Function. The meter will not allow calibration until the electrode has stabilized to ensure accurate pH measurements. Suggested Retail Price: $699.00

HI 931401 With a pH resolution selectable between 0.001 and 0.01 pH, and mV resolution of 0.1 mV from -999.9 to +999.9 mV, the top-of-the-line HI 931401 is designed for those operators who need optimum accuracy. The pH/mV readings are displayed together with temperature on a large dual level display. The pH measurements are automatically adjusted for the temperature effect. Calibration is simple with the memorized buffers comprising both the Standard 4.01, 7.01 and 10.01 as well as the NBS (NIST) 6.86 and 9.18 solutions. The display gives step-by-step prompts for the first and second buffers and provides error messages if the wrong solution is used. Since the electrode requires a certain amount of time to stabilize between buffers, the meter will not display the READY symbol until the electrode has stabilized. With the READY feature, you are assured of your calibration being correct which means all your subsequent measurements are accurate too. HI 931401 is supplied complete with a starter kit including the HI 1131B glass-body, refillable combination pH electrode, HI 7669/2 stainless steel temperature probe, HI 76405 electrode holder, pH4, pH7 and electrolyte solutions and a dust cover. Upon request, version HI 931401NLP is also available with power socket 12 VDC supply (CSA & UL approved).

Specifications:

  Range:      pH        0.000 to 14.000 pH & 0.00 to 14.00 pH 

              mV        ±999.9 mV(ISE & ORP)

              Temp.     0.0 to 100.0°C

  Resolution: pH        0.001 & 0.01 pH

              mV        0.1 mV(ISE) / 1 mV(ORP) 

              Temp.     0.1°C

  Accuracy:   pH        ±0.002 & 0.01 pH

              mV        ±0.05% (ISE) / ±1 mV(ORP) 

              Temp.     ±0.5°C

  Calibration:          Automatic 1 or 2 point with recognition of 5 buffers

  Temp.Compensation:    Automatic and Manual from 0 to 100°C

  Electrode:            HI 1131B Glass combination pH electrode (included)

  Temperature Probe:    HI 7669/2 Temperature Probe (included)

  Input Impedance:      10¹²ohm              

  Computer Interface:   RS232

  Power: HI 931401      240/220/110 Volts ±15%, 50-60 Hz, Max power 10W

         HI 931401NLP   power socket for 12 VDC supply 	(CSA & UL approved)

  Environment Temp.:    32 to 122°F (0 to 50°C)

  Dimensions:           9.1 x 6.7 x 2.7" (230 x 170 x 70mm)

  Weight:               2.9 lbs (1.3 kg); KIT with holder:  7 lbs (3.2 Kg)

Windows^® is a registered Trademark of "Microsoft Co."

	pH 301 Bench-Top pH/mV/ION/°C Meter Direct Readings in ppm or mV ISE measurements converted automatically by internal microprocessor to read directly in ppm or mV Logging Function can be used in the pH, mV and ISE mode Windows® Compatible the RS 232 port is bidirectional, so the meter can be operated with the computer keyboard and even download in real time! Suggested Retail Prices: pH 301: $1,199.00* pH 301-KIT: $1,399.00*
*Valid only in USA

pH 301 includes all the basic features offered by pH 300. In addition, the resolution of the pH range has been extended to 0.001 pH and, for routine operations, the operator can also choose to use the 0.01 pH resolution. The pH calibration can be performed at 1, 2 or 3 points with 6 memorized pH values (pH 1.68, 4.01, 6.86, 7.01, 9.18 and 10.01). In the ISE mode, the user can choose between readings in mV or direct concentration in ppm. Calibration can be performed at 1 or 2 points with 5 memorized concentration values (0.1, 1, 10, 100 and 1000 ppm). During pH and ISE calibration the time (hours and minutes) is stored in the non volatile memory together with the date and data. Similar to the pH mode, the ISE calibration time, date and data can be recalled, to meet GLP requirements. The opto-isolated RS 232 is bidirectional, which means that the user can operate the meter from the computer keyboard. The pH 301 logging function can be used in the pH, mV and ISE modes. The logging interval is user selectable (1, 15 or 30 seconds and 1, 5, 30, 60, 120 and 180 minutes). The memory is capable of retaining up to 99 different lots, each containing a maximum of 8,000 samples.

pH 301 is supplied ready-to-use, complete with glass body combination pH electrode, 12 VDC adapter, pH 4.01 and 7.01 calibration solutions (30mL each) and instruction manual.

pH 301-KIT in addition to the pH 301 basic accessories, the kit version includes a cantilever electrode holder, combination platinum ORP electrode, temperature probe, Windows^® compatible application software, PC connection cable, storage, cleaning and electrolyte solutions (30mL each) and a refilling pipette.

Specifications:

Windows^® is a registered Trademark of "Microsoft Co."

	pH 302 Bench-Top pH/mV/°C Meter with Built-in Printer Printing Capability A hard copy of any measurement is always available on 44 mm wide plain paper. GLP The calibration date and data are stored into non-volatile memory and can be easily recalled using the Last Calibration Data Recall Function. PC Compatible Download in real time through the RS 232 port and Windows® compatible software. Suggested Retail Prices: pH 302: $899.00* pH 302-KIT: $1,099.00*
*Valid only in USA

pH 302 incorporates all the basic features offered by pH 300, and it fits the ever increasing need to document and record the results of your tests. In order to do this in a simple and yet accurate and reliable way, pH 302 has been equipped with a built-in printer (dot matrix, 44 mm wide plain paper) and powerful software that provides 9 programs to help you with all possible documentation needs. This meter can print at user selectable intervals the sample #, the date and time of the measurement, the pH and temperature for a programmed amount of time or until a pre-selected end point (pH or mV) is reached. Calibration procedures and instructions, pH electrode characteristics (offset and slope %) during calibration are also documented on paper. pH 302 also features a sound alarm that activates once the selected upper or lower limit is reached (ideal for titration applications). The user has 6 languages to choose from (English, French, German, Italian, Spanish and Swedish) for the printed instructions and reports.

pH 302 is supplied ready-to-use, complete with glass body combination pH electrode, 12 VDC adapter, pH 4.01 and 7.01 calibration solutions (30mL each), 5 rolls of paper and instruction manual.

pH 302-KIT in addition to the pH 302 basic accessories, the kit version includes a cantilever electrode holder, combination platinum ORP electrode, temperature probe, Windows^® compatible application software, PC connection cable, storage, cleaning and electrolyte solutions (30mL each) and a refilling pipette.

Specifications:

Windows^® is a registered Trademark of "Microsoft Co."