Single- and three-phase power-quality, energy, harmonics, and flicker analysis
Four current, four voltage channels (V, A, W, Var, power factor, THD, energy, sag, swell
and more)
NEMA 4x enclosure
PowerACE for Windows software
A POWERFUL POWER MONITOR FOR TODAY’S COST-CONSCIOUS END USER
The ACE Quatro is a low-cost power recorder for simultaneous monitoring of power
quality, power flow, harmonics, and flicker of three-phase power systems. Used in
conjunction with PowerACE for Windows software, a power survey containing up to six
weeks’ data stored in flash memory can be transferred to a PC via RS-232 infrared
link or external modem for report generation and data analysis. The PowerACE for Windows
software, compatible with all our products, displays data and creates complete reports,
including charts and graphs, to provide a complete profile of a site. Compact in design,
multiple ACE Quatros can be installed within a facility or substation to monitor critical
points. The ACE Quatro is line-powered or powered by an external supply for low-voltage
monitoring and equipped with LEDs to provide visual confirmation of 'power on' and proper
phase connections. Straps can be used to mount the ACE Quatro to a pole or panel.
MEASUREMENT MODES
Power Quality
Power Flow
RMS variations: sags and swells
V RMS
Impulses
I RMS
Waveshape faults
kW/h
Demand (kW and kVA)
PF
Frequency
W
kW/h
Vectors
Harmonics
Flicker
Individual
Pst, Plt
THD up to 63rd
BENEFITS
Indoor/outdoor mounting
Wireless transfer saves time and money
Free software upgrades from Web page
Firmware upgradeable in field
Low-cost method to monitor multiple points simultaneously
TECHNICAL INFORMATION
General
Voltage inputs:
Phase A, B, C, neutral, and ground
Current inputs:
Phase A, B, C, and neutral
Power types:
3-phase delta and wye, 3-4 wire, split-phase
Operating Power
AC voltage:
170 VAC to 600 VAC from the measuring line (North America)
170 VAC to 480 VAC (international)
Power adapter:
80 VAC to 230 VAC
Frequency:
45 Hz to 65 Hz; 400 Hz
Measurement Range and Capability
Channels:
4 voltage / 4 current
Voltage:
0.1 VAC to 600 VAC
0.01 to 20,000 PT ratio
Current:
0 A to 10,000 A (probe dependent)
0.01 to 10000 CT ratio
Sample rate:
8 kHz voltage and current
Impulse:
1.2 kVpk
Measurement Capability
Voltage and current:
RMS, Min, Max, Avg, on all measurements (configurable)
You may not
have to climb a mountain to get the job done, but whether you work
indoors or outdoors, the DM-IITM gives you peak performance in any
environment
Models LT8200RFE and
LT8200RCE time-sharing recorders
Models
LT8200RFE and LT8200RCE are time-sharing recorders that can record two
temperatures (refrigerator/freezer cabinets, indoor/outdoor, duct
intake/outlet) and one "on/off" event (on/off operation of
compressor, electric heating element, fan or pump motor).
AMPROBE
voltage recorders are designed to monitor voltage conditions over a wide
variety of ranges. Models PAV2X, PAV3X and PAV4X are expanded scale
recorders. Because their scales do not start at zero, they provide a
high degree of readability.
Multiple Input AC Volt/Amp
Time Sharing Strip Chart Rec
The LAW78KWH
and LAW79KWH are the first low cost recording Watt/VAR meter designed to
record both power consumption and reactive volt/amperes in all of the
most common single-phase and three-phase (three and four wire) systems
(balanced or unbalanced).
RiS, ACE Quatro POWER MONITOR, calibrators, Current Transformers,
Annunciators, transducers, Meters, RiSCue, ace 4000 ,ace tr 2000, Transient Recorders,
Power Quality, Event Recorders, Machine Monitors, Expert Systems">
Phone:
813-971-5001
Fax : 813-971-5117
Omni
Controls Inc.
5309 Technology Dr.
Tampa, FL 33647
Toll
Free
1-800-783-6664
Sales@Omnicontrols.com
We
guarantee a 24 hour response on all inquiries made via email.
For quicker response please call Omni Controls
at any of the above numbers
