Dual-Function Calibrators

More Calibrators

 
Altek
830-T-VIP
TechChek Multifunction Calibrator 830 with FREE 107 Piece Allen Socket Set
List Price: $1,695.00   USD
 
Altek
820-T-VIP
Process Calibrator TechChek 820 with FREE 107 Piece Allen Socket Set
List Price: $1,295.00   USD
 
Altek
820-L-VIP
Multifunction Calibrator, FREE Thermocouple Wire Set, FREE DMM and FREE PST Tool!
List Price: $1,295.00   USD
 
Altek
830-L-VIP
Multifunction Calibrator, FREE Thermocouple Wire Set, FREE DMM and FREE PST Tool!
List Price: $1,695.00   USD
 
Altek
830-KP
TechChek Multifunction Calibrator, Dual Display, 0.05% Accuracy, Keypad Version
List Price: $1,695.00   USD
 
Altek
546
HART Smart Transmitter Calibration Kit
List Price: $1,879.00   USD
 
Altek
23120E-L
Replacement Lead Kit For CheckMate 1000
List Price: $129.00   USD
Altek
556
T/C & mA Calibrator Kit
List Price: $1,388.00   USD
 
Altek
820E
Process Calibrator TechChek 820
List Price: $1,295.00   USD
 
Altek
830E
TechChek Multifunction Calibrator, Dual Display, 0.05% Accuracy
List Price: $1,695.00   USD
Special Price: $1,440.00   USD
 
Druck
23320E-115
Line Adapter For 23320e 115vac
List Price: $110.00   USD
 
Druck
23324P
Cable for 23320E & Sensors (one required)
List Price: $85.00   USD
 
Druck
4773E
Test Lead Set For 23320E (TRX-II)Multifunction Calibrator
List Price: $55.00   USD
 
Druck
5482E
Multifunction Documenting Calibrator
List Price: $3,695.00   USD
 
Druck
5482E-SMART
Multifunction Documenting Calibrator w/Hart Interface, Installed
List Price: $4,590.00   USD
 
Druck
5483P
Pressure Module for 5482E, 140" H2O
List Price: $995.00   USD
 
Druck
5484P
Pressure Module for 5482E, 30 PSIG
List Price: $995.00   USD
Druck
5485P
Pressure Module for 5482E, 100 PSIG
List Price: $995.00   USD
 
Druck
5486P
Dual Pressure Module for 5482E, 140" H2O & 30 PSIG
List Price: $1,595.00   USD
 
Druck
5487P
Dual Pressure Module for 5482E, 30 PSIG & 100 PSIG
List Price: $1,595.00   USD
 
Druck
5487P-20-300
Dual Pressure Module for 5482E , 20 PSI & 300 PSI
List Price: $1,595.00   USD
 
Druck
5488P
Dual Pressure Module for 5482E, 100 PSIG & 100 PSIG
List Price: $1,595.00   USD
 
Druck
5489T
Temperature Probe
List Price: $225.00   USD
 
Druck
5498E
Hart Interface Kit for MCX-II (5482E)
List Price: $895.00   USD
 
Druck
DPI720
Multifunction Process Calibrator
List Price: $995.00   USD
 
Druck/Unomat
23320E
Multifunction Calibrator w/RS-232, High Accuracy & Resolution
List Price: $2,765.00   USD
 
Druck/Unomat
23320E-IS
Multifunction Calibrator w/RS-232, High Accuracy & Resolution, Intrinsically Safe Version
List Price: $3,350.00   USD
 
Fluke
725E-L-VIP
Multifunction Calibrator,with FREE Carrying Case, & FREE T/C Lead Set, & FREE Toolpak Hanger, and FREE PST Tool!
List Price: $1,795.00   USD
 
Fluke
725E
Model 725 Multifunction Process Calibrator
List Price: $1,795.00   USD
 
Fluke
741B
Documenting Multifunction Process Calibrator
List Price: $3,250.00   USD
 
Fluke
743B
Documenting Multifunction Process Calibrator, RS 232 Interface
List Price: $4,250.00   USD
 
Fluke
744E
Documenting Multifunction Calibrator, RS-232 & HART Communication
List Price: $4,950.00   USD
 
Hathaway/Beta
918081-001
BetaPort I/O Module Kit (BetaPORT-D2, -R, -T, & -F)
List Price: $1,800.00   USD
 
Hathaway/Beta
910360-A01
Documenting Multifunction Calibrator (No PCMCIA Slot)
List Price: $3,595.00   USD
 
Hathaway/Beta
910360-B11
Documenting Multifunction Calibrator with PCMCIA Slot
List Price: $3,895.00   USD
 
Hathaway/Beta
910360-C11
Documenting Multifunction Calibrator with HART Protocol PCMCIA Card
List Price: $5,820.00   USD
 
Hathaway/Beta
910360-D21
Documenting Multifunction Calibrator with Honeywell DE Protocol PCMCIA Card
List Price: $4,850.00   USD
 
Hathaway/Beta
910357-001
BetaPort-T Multi-Curve Thermocouple I/O Module
List Price: $575.00   USD
Hathaway/Beta
910356-001
BetaPort-R Multi-Curve RTD I/O Module
List Price: $575.00   USD
 
Hathaway/Beta
917007-001
Spare BetaPort-D DC Current and Voltage (Input Only) Module
List Price: $595.00   USD
 
Hathaway/Beta
910355-001
BetaPort-D2 DC Voltage and Current I/O Module
List Price: $475.00   USD
  
Hathaway/Beta
910358-001
BetaPort-F Frequency Module
List Price: $475.00   USD
 
Hathaway/Beta
5948P-7
Pressure Module 0 to 300 PSIG (0 to 20BAR)
List Price: $695.00   USD
 
Hathaway/Beta
910354-001
HART Protocol PCMCIA Interface Card
List Price: $695.00   USD
 
Hathaway/Beta
910353-001
Honeywel DE Protocol PCMCIA Interface Card
List Price: $995.00   USD
 
Hathaway/Promac
X20-B6S
Spare Battery Pak
List Price: $250.00   USD
 
Hathaway/Promac
X20-RTD
RTD Simulator Module for DHT830
List Price: $235.00   USD
 
Hathaway/Promac
X20-TL2
Test Lead - Dual
List Price: $69.00   USD

Martel
MC-1000 
High Accuracy Multi-Function Calibrator
Price-$1350
 
Martel
M2001
DC Voltage and Temperature Calibrator
List Price: $3,295.00   USD
 
Martel
M2001A
DC Voltage and Temperature Calibrator w/IEEE-488
List Price: $3,595.00   USD
 
Martel
M2000/1RMK
Rack/Panel Mount Kit for M2000 Bench Calibrator
List Price: $149.00   USD
 
Martel
IBP-1
PT100 High Accuracy Probe
List Price: $695.00   USD
Martel
80029
JKTE Thermocouple Kit
List Price: $89.00   USD
 
Martel
80036
RSNB Thermocouple Kit
List Price: $89.00   USD
 
Meriam Instruments
MFT4000
MFT 4000 Multifunctional Modular Calibrator / Communicator
List Price: $1,795.00   USD
 
Meriam Instruments
MFT4010
Modular Multifunction Calibrator w/ HART Communicator
List Price: $2,995.00   USD
 
Meriam Instruments
MFT4020
Modular Multifunction Calibrator w/ Loop Supply
List Price: $2,295.00   USD

Meriam Instruments
MFT4002
MFT 4002 Multifunctional Modular Calibrator / Communicator; Instrinsically Safe Version
List Price: $1,970.00   USD
 
Meriam Instruments
MFT4012
MFT 4012 Multifunctional HART Calibrator / Communicator; Instrinsically Safe Version
List Price: $3,170.00   USD
 
Transcat
MF880
Multifunction Calibrator
List Price: $1,895.00   USD
 
Transmation
190-VIP
Multifunction & Pressure Calibrator, FREE Carrying Case, FREE Tubing and Fitting Kit & FREE 107 piece Allen Socket Set
List Price: $4,695.00   USD
 
Transmation
191-VIP
Multifunction & Pressure Calibrator, FREE Carrying Case, FREE Tubing and Fitting Kit & FREE 107 piece Allen Socket Set
List Price: $5,695.00   USD
 
Transmation
195-VIP
Multifunction & Pressure Calibrator, FREE Carrying Case, FREE Tubing and Fitting Kit & FREE 107 piece Allen Socket Set
List Price: $5,695.00   USD
 
Transmation
196-VIP
Multifunction & Pressure Calibrator, FREE Carrying Case, FREE Tubing and Fitting Kit & FREE 107 piece Allen Socket Set
List Price: $6,695.00   USD
 
Transmation
190P
QuikCal 190 Multifunction & Pressure Calibrator, 0.025% Accuracy
List Price: $4,695.00   USD
 
Transmation
191P
QuikCal 191 Multifunction & Pressure Calibrator
List Price: $5,695.00   USD
Transmation
195P
QuikCal 195 Multifunction & Pressure Calibrator
List Price: $5,695.00   USD

Transmation
196P
QuikCal 196 Multifunction & Pressure Calibrator
List Price: $6,695.00   USD
 
Transmation
191-L-VIP
Multifunction & Pressure Calibrator, FREE Carrying Case, FREE Tubing and Fitting Kit, FREE Dirt/Moisture Trap, FREE PST Tool, & FREE DMM
List Price: $5,695.00   USD
 
Transmation
195-L-VIP
Multifunction & Pressure Calibrator, FREE Carrying Case, FREE Tubing and Fitting Kit, FREE Dirt/Moisture Trap, FREE PST Tool, & FREE DMM
List Price: $5,695.00   USD
 
Transmation
196-L-VIP
Multifunction & Pressure Calibrator, FREE Carrying Case, FREE Tubing and Fitting Kit, FREE Dirt/Moisture Trap, FREE PST Tool, & FREE DMM
List Price: $6,695.00   USD
 
Transmation
190-L-VIP
Multifunction & Pressure Calibrator, FREE Carrying Case, FREE Tubing and Fitting Kit, FREE Dirt/Moisture Trap, FREE PST Tool, & FREE DMM
List Price: $4,695.00   USD

 

Multi-function Universal Temperature Calibrator CL-8026  


* 13 Thermocouples, 5 RTDS, mV, resistance
* Input(monitor) and output(source) functions
* Cold junction compensation
* Smart transmitter compatible
* Three year warranty
* Setpoint and ramping
1079-009 120 VAC Power Adaptor -- $50
1079-010 240 VAC Power Adaptor -- $140


Multi-function Process Calibrator CL-4002 

* Sources and Simulates 0 to 24 mA

* Reads 0 to +/- 50 mA

* Displays in milliamps or percent

* Powers 2-wire transmitters while reading loop current

* Rugged dirt and moisture resistance case






Current Calibrator CL-4102  

* Read, simulate and source 4 to 20mA current loops
* Three stored setpoints
* Pocket sized
* User defined, auto-step mode










Voltage Calibrator CL-4103 - 


* Read and source voltage signals
* Two different ranges in one model
* Three stored setpoints
* User defined, auto-step mode










Voltage & Current Process Signal Calibrator CL-4303  is replaced with PSC9003 


* Calibrate millivolt, voltage and current signals
* Display signals in engineering units or percent of span
* Built-in 24 V loop power supply
* Three stored setpoints




PSC-9003  $1395    
 
COMMON FEATURES
bullet Simultaneously sources and reads a variety of process signals (V, mV, mA, Hz)
bullet 0.05% basic accuracy on all ranges
bullet Up to 9 calibration points can be stored on each range
bullet Built-in 24 volt loop supply
bullet Direct Keyboard data entry
bullet All inputs and outputs protected against overloads
PSC-9003
The Martel PSC-9003 is a full func-tion process signal calibrator capable of sourcing and reading all common process signals such as volts, millivolts, milliamps and frequency. This wide range of capability makes the PSC-9003 ideal for calibrating or monitoring trans-mitters, recorders, flow instrumentation, data acquisition equipment or any other process instruments requiring these types of signal inputs.

Housed in a rugged hand-held case, the PSC-9003 features 0.05% basic accuracy on all ranges. Up to nine (9) calibration setpoints can be stored in non-volatile memory for each of the ranges. An auto-step function allows the user to automatically step through each of the stored setpoints for a particular range at a predetermined interval.

An internal 24 volt loop power sup-ply allows the unit to power two-wire transmitters while reading the current loop. As a simulator, the PSC-9003 can drive current loops up to 1000 ohms and can source up to ±1 mA when operated in the voltage mode.

Each Unit Includes: Test leads, large carrying case, 4 AA alkaline batteries, NIST Certificate, and instruction manual.

General Specifications:
Input/Output Ranges: Volts:  0 to 20.000
mV:  0 to 200.00
mA:  0 to 24.000
KHz:  .1 to 10 KHz
Hz: 1 to 1000 Hz
CPM:  1 to 1000CPM
Accuracy (% of FS): ±.05% ±1LSD
Input z (Volts/Freq.):
(Current):		 1 Meg Ohm typical
20 ohms typical
Output Current
(Voltage Range):		 ±1.0 mA
Voltage Compliance
(Current Range):		 24V ±10%
Input Sensitivity (Freq.): 1V to 100 V
Output Voltage (Freq.): 5V p-p Square Wave
Stability: ±0.005%/°C of FS reading
Oper. Temp.: 32 to 122°F / 0 to 50°C
Display: 32 Character, 2 x 16 format dot matrix
Power Supply: 4 AA Alkaline Cells or 4 AA Ni-Cd Cells
Optional AC Adaptor/Ni-Cd Charger Available
Size: 7" x 3.8" x 1.6" HWD
Weight: 15 oz.
View PDF file (49.4KB)


RTD & Thermocouple Calibrator CL-4305 -- $1045 is replaced with PTC8001 


* Read/simulate RTD's and thermocouples
* C or F display
* Three stored setpoints
* Built-in internal cold junction compensation



PTC-8001  $995.00 
High Accuracy Temperature Calibrator "Smart" Transmitter Compatible		  
COMMON FEATURES
bullet High accuracy ±0.4°C J T/C and ±0.3°C 4W PT385 RTD all errors included
bullet 10 T/C types and 8 RTD types including PT 385 (1000 ohm) and cu (10 ohm)
bullet Direct keyboard entry or scroll control of output
bullet Nema 4 rated case, rugged design
bullet RTD simulation works with all pulsed (smart) transmitters
bullet YSI 400 series thermistor range for medical applications
bullet Standard mini-plug or banana jack connections for T/C
bullet Store up to nine setpoints for each output function
bullet RS232 Interface
PTC-8001
The Martel PTC-8001 Precision Temperature Calibrator is an ideal device to handle all of your temperature calibration needs in a truly rugged, low cost package. It combines virtually all widely used thermocouples and RTDs in one device—you’ll never have to worry about finding a temperature device you can’t calibrate.

This is especially true when calibrating “smart” or pulsed RTD transmitters where many other calibra-tors fail to work or operate at reduced accuracy specs. The PTC-8001 handles those applications with ease.

Each Unit Includes: Test leads, carrying case, 4 AA alkaline batteries, NIST Certificate, and instruction manual.

Note: For T/C please order T/C cable kit.

General Specifications:
T/C Ranges: J, K, T, E, R, S, N, B, L, U including – 10 to 70 mV range
RTD Ranges: Pt 385 (100, 200, 500, 1000 ohms)
Pt 392, JIS, Ni 120, CU10, YSI 400
Ohms Ranges: 0 to 400.00 and 400.0 to 4000.0
Accuracy: T/C Type J: ±.3°C ±10
V (±0.6°C total error)
RTD PT100: ±.1°C ±.075 (±0.3°C total error)
Ohms (400): ±0.1
Ohms (4000): ±1.0
RTD IEX-range: 0.01 mA to 3 mA
RTD Frequency Response:
10 mS – works with all pulsed XMTR’s
Oper. Temp: -10°C to 50°C
Storage Temp: -20°C to 60°C
Power Supply: 4 AA Alkaline Cells, 30 hours typical operating time
Size: 7.5" x 4" x 1.5"


Range: Min Max Accuracy  
Ohms Read 4w (low): 0.00 400.00 0.1 ohm  
Ohms Read 4w (high): 400.0
1500.0		 1500.0
4000.0		 0.5 ohm
1.0 ohm		  
Ohms Ranges:        
Range: Min Max Excitation Current Accuracy
Ohms Source (low): 5.00
5.00		 400.00
400.00		 0.1 to 0.5 mA
0.5 to 3 mA		 0.15 ohm
0.1 ohm
Ohms Source (high): 400.0
1500.0		 1500.0
4000.0		 0.05 to 0.8 mA
0.05 to 0.4 mA		 0.5 ohm
1.0 ohm


RTD Read and Source
Range: Min Max Accuracy
Ni120 (672) -80.0 260.0 0.2°C
Pt100 (385) -200.0 800.0 0.33°C
Pt100(3926) -200.0 630.0 0.3°C
Pt100(3916) -200.0 630.0 0.3°C
Pt200(385) -200.0
100.0		 630.0 0.8°C
Pt500(385) -200.0
500.0		 500.0
630.0		 0.3°C
0.4°C
Pt1000(385) -200.0
100.0		 100.0
630.0		 0.2°C
0.3°C
Cu10 -100.0 250.0 2.2°C
YSI400 15.00 50.00 0.05°C


Thermocouple Read and Source (All errors included)
Range: Min Max Accuracy
J Thermocouple -200.0
0.0		 0.0
1200.0		 0.6°C
0.4°C
K Thermocouple -200.0
0.0		 0.0
1370.0		 0.8°C
0.5°C
T Thermocouple -200.0
0.0		 0.0
400.0		 0.8°C
0.5°C
E Thermocouple -200.0
0.0		 0.0
950.0		 0.5°C
0.4°C
R Thermocouple -20
0
50.0		 0.0
500
1750		 2.4°C
1.7°C
1.3°C


Range: Min. Max. Accuracy
S Thermocouple -20
0
500		 -20
0
1750		 2.4°C
1.7°C
1.4°C
B Thermocouple 600
8000
1000		 800
1000
1800		 2.1°C
1.7°C
1.3°C
L Thermocouple -200.0
0.00		 0.0
900.0		 0.45°C
0.4°C
U Thermocouple -200.0
0.00		 0.0
400.0		 0.7°C
0.45°C
N Thermocouple -200.0
0.00		 0.0
1300.0		 1.1°C
0.6°C
mV Read/Source -10.00 75.00 0.015% ± 2
View PDF file (130KB)
View Product Comparison PDF file (84.3KB)
Microprocessor Calibrator Thermometer 433201 More_Info
Source and Measure 8 thermocouple type devices J, K, T, E, C, R, S and N
Base price : US$349.00
1. Model :
2. Accessory :
3. Accessory :
Unit Price:
Type J or K Calibrator Thermometer 42311 More_Info
Quick and easy sourcing and measurement
Base price : US$159.00
Model :
Unit Price:
Unical Precision RTD Calibrator 423412 More_Info
Calibrates 12 Thermocouples or 9 RTDs
Base price : US$849.00
Model :
RS232 :
Unit Price:
Unical Precision T/C Calibrator 423408 More_Info
Calibrates 12 Thermocouples or 9 RTDs
Base price : US$799.00
Model :
RS232 :
Unit Price:
Fluke 705 Loop Calibrator More_Info
The new Fluke 705 Loop Calibrator is a cost-effective, integrated solution for calibration, repair and maintenance of current loops
Base price : US$449.00
Model :
Unit Price:
Fluke 710 Series Pressure Calibrators More_Info
The Fluke 710 Series Process Calibrators offer a clear new choice in single-function calibrators. These hand-held calibrators deliver outstanding performance, durability and reliability
Base price : US$795.00
Model :
Unit Price:
Fluke 712 RTD Calibrator More_Info
Measure temperature from RTD output
Base price : US$795.00
Model :
Unit Price:
Fluke 714 Thermocouple Calibrator More_Info
Measure temperature from TC output
Base price : US$795.00
Model :
Unit Price:
Fluke 715 Volt/mA Calibrator More_Info
Measure loop current (0-20 mA, 4-20 mA) signals with 0.025% accuracy and 1 mA resolution
Base price : US$795.00
Model :
Unit Price:
Fluke 787 ProcessMeter Loop Calibrator More_Info
Fluke combined the DMM you trust with the loop calibrator you need.
Base price : US$495.00
Model :
Unit Price:

Phone: 813-971-5001
Fax : 813-971-5117

Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Toll Free
1-800-783-6664

email sales@omnicontrols.com
Sales@Omnicontrols.com

We guarantee a 24 hour response on all inquiries made via email.
For quicker response please call Omni Controls
at any of the above numbers

 


Please Note: All prices subject to change without notice
copyright©omnicontrols.com - All Rights Reserved.
Terms and Conditions for Omni Controls Inc - online. Legal Disclaimer
Supplementary Information and Cover Art Copyright omnicontrols.com. All rights reserved.

copyright © omnicontrols 2005
Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Email: sales@omnicontrols.com

Phone: 800-783-6664
Fax: 813-971-5117