| Electronic Thermo-Hygrograph OPUS I Data Logger  Automatic and Precise Readings
Transmitted from Data Logger to Your Computer. This new thermo-hygrograph puts the data right on your PC — charts it, graphs it, and analyzes it. Allows you to zoom in to a specific point to see exactly what was happening at that time. You can select any measurement interval and any time interval. Print out any time period (day, week, month) in the form most convenient for your application. |
|
|||||||||||||||||||
| •
Barograph version also available • °F & °C switchable • Graphic LCD-display (5" x 2.75") • Printer interface • Fieldbus-compatible (can-fieldbus) • Battery powered • Any measurement interval • Long term recording without service • Table installation or wall mounting • Alarm function • PC-interface RS232 • Expandable memory (memory card) |
||||||||||||||||||||
|
Data Logger Specifications Protection type: IP54 Power supply: 9V - 12V Batteries/recharg.: 5x mono cells Operating temperature: -20°C to 50°C Operating humidity: 0% - 90% Current: tbd CPU: 80C537A (Siemens) Program memory: max. 256 kByte Data memory: max. 2 MByte EPromADC: 4 KBit ADC: 16 Bit/10 Bit Humidity resolution: 0.5% LCD: graphics capable LCD-illuminiscence: CFL Incremental switch: 24 Imp/rotation Accuracy clock: ±4 sec/d Dimensions: 10" x 9" x 2" • Barograph version also
available
|
|||||||||||||||||||
| OPUS II Data Logger |
|||||||
 |
l 8-Channels for Data Collection l Measuring Interval: 1 sec, 10 sec or 60 sec l Progammable Storage Interval: 1, 2, 5, 10 or 60 min. l Measuring Interval: 1 sec, 10 sec or 60 sec l Big Super Twisted LC Display l Data storage of up to 1,000,000 Measurements l Voltage, Current or Digital Input Signals l 90 to 260V AC Charger, Batteries, NiCAD Rechargeable Batteries or Solar Panel l SmartGraph Software (under Windows™). |
||||||
| Data Transmission l RS232 l Telephone (Modems) A versatile data logger that takes
almost any type of sensor, records the data and transfers the data to a PC when called
for. This datalogger puts the data right on your PC — charts it, graphs it, and analyzes it. Allows you to zoom in to a specific point to see exactly what was happening at that time. You can select any measurement interval and any time interval. Print out any time period (day, week, month) in the form most convenient for your application. OPUS-II is a flexible data logger that is ideal for industry, laboratory, science, and meteorology. Protective weatherproof cabinets are available for outdoor monitoring. Extended memory cards can also be used. Smart-Graph Software interfaces with other evaluation software. We can offer the following sensors for use with OPUS II, however it is not limited to these sensors:
|
|||||||
| Model 8151.00 OPUS II 8-Channel Data Logger Without display, includes SmartGraph Software, carrying case and instructions. $1,575.00
Model 8151.20 OPUS II 8-Channel Data Logger With display, includes SmartGraph Software, carrying case and instructions. $1,882.00 |
|
||||||
Abbeon
Opus 200/300 Modular Dataloggers
Description
The Opus 200 and 300 modules work with virtually any type of sensor for
measuring values such as temperature,
humidity, pH, dissolved oxygen, gases, wind, wind speed, wind direction,
pressure, etc. Each module has two
channels to which sensors can be
connected. Each channel has its own datalogger with microprocessor, memory
and clock, so if there should be a failure, only one datalogger is down. This
re-
duces the risk of lost data. Current readings can be viewed on the module’s
LCD
display.
These modules are DIN rail mountable and their modular design allows you to
develop a flexible system. Each module acts as an interface for data transmis-
sion by use of bus connectors — these modules can be connected in series up to
150 units.
Data can be downloaded to your computer either by RS232 cable or by telephone
modems. Comes with Smart Control software that easily configures the system,
downloads data, and displays values as charts or graphs or as a digital display.
Data can be printed out in the form that is most suitable for your analysis, and
a
variety of values can be placed on the same graph for comparison and analysis.
The Smart Control software includes a safety feature that prevents the data from
being manipulated or changed.
While the Opus 200 series is highly accurate, the Opus 300 series has even
higher accuracies (see following specifications). For added security and to
preventinterference, the Opus 200i and 300i are galvanically isolated from the
power supply. All models operate on a 120v AC adapter or the Opus 200/300
operate ona 12-volt battery and the Opus 200i/300i operate on a 24-volt battery.
Details
Specifications
Accessories
8160.SV3 Power Supply, 12 V $346.50
8161.SV3 Power Supply, 24 V $198.00
8160.KAB RS232 Cable for Downloading $5.85
8160.ST1 Bus Connector $24.30
8160.ST2 Connector Kit for Probes $43.53
8160.ST3 Connector for Thermocouple $77.75
* Includes Smart Control Software
Model
* 8160.00 Opus 200 Modular Datalogger $737.75
* 8161.00 Opus 200i Modular Datalogger, GalvanicallyIsolated $891.90
* 8160.10 Opus 300 Modular Datalogger $835.90
* 8161.10 Opus 300i Modular Datalogger, GalvanicallyIsolated $969.75
CAN-BUS System for Recording Physical Values in up to 400 Measuring Points With a PCFor Price and information see below The CAN-System is a real-time system which takes readings from up to 400 measuring points. Measurements can be displayed and archived on line with a personal computer, the open CAN communications protocol allows values to read directly e.g. from PLC. The CAN-System is a fixed system. The CAN-Master provides power to the system; for large systems repeaters are available.Practically any sensor can be connected to the CAN-System. The CAN-System actuator provides control features in addition to the recording, archiving and evaluation of measurements. The CAN-System's transmitters operate on a BUS system, which comprises a microprocessor system, an analog/digital converter, BUS processor and BUS driver. Transmitters convert any physical value of temperature, humidity, current or voltage into a digital signal. Each transmitter has its own "telephone number" whenever the CAN-Master selects this number the transmitter sends its information to the BUS in the form of a digital signal. CAN-System networks may consist of up to 200 transmitters and actuators. Data is carried out digitally, any IBM compatible PC can be used as a data capture system. Universal transmitters offer easy data capture from virtually any kind of physical value. The CAN-System's cabling costs are affordable since transmitters and actuators are daisy-chained by one cable. The CAN-System offers an open solution for the integration of further measurement values and additional sensor points by simple extension of software and hardware. Requirements: IBM compatible PC, 486 min, Windows™ 3.1 or Windows 95, hard disc
|
etwork CAN.
|
Abbeon products |
||
 HUMIDITY METERS |
 THERMOMETERS |
|
All prices subject to change without notice
