Ametek Test Equipment

More Ametek

Type RK Portable Pressure Tester -- $3900 - $7900

SPECIFICATIONS

ACCURACY: +0.05%, +0.025%, +0.015%** of indicated reading. Stainless steel weights. Calibrated for international standard gravity 980.665 cm/sec2 or users local gravity.
REPEATABILITY: 0.005% of output reading.
TEMP. COEFFICIENT: 0.0000167 of output pressure per degree C., based on 23°C.
SUPPLY PRESSURE: Instrument quality air per ISA Quality Standard S 7.3. Maximum: 450 PSI, Minimum: 30 PSI or 150% of output pressure, which ever is greater.
FLOW RATE: 1 SCFH at 4" H2O output. 60 SCFH at 300 PSI output.
CASE SIZE (LxWxH): 38.1 x 24.1 x 20.3 cm
WEIGHTS: 8.5 x 12.0 x 11.5 inches 21.6x30.5x29.2cm

TOTAL WEIGHT
TESTER: 18 to 31.5 Ibs. (8.18 to 14.3 kg)
WEIGHTS: 17.5 to 61.5 Ibs. (7.95 to 27.95 kg)
INPUT & OUTPUT CONNECTIONS: 1/8" NPT Female

Deadweight Tester, Type 10 -- $2500 - $6000

SPECIFICATIONS

ACCURACY: +0.1% of indicated pressure traceable to U.S. National Institute of Standards & Technology.
TEST FLUID: AAA tester oil. MAX. OPERATING PRESSURE: 70,000 kPa (10,000 PSI).
WETTED PARTS: Aluminum, stainless steel, carbon steel and brass. O-rings - Standard: Buna N. Optional: Viton™, EPT.
TEST CONNECTIONS: Male and female union type 1/4" NPT, 3/8" NPT, 1/2" NPT, 7/16"-20UNF.
WEIGHTS: Hard, non-magnetic zinc cast alloy weights.
OVERALL DIMENSIONS (LxWxH): 20.625 x 9.0 x 27.75 inches 53.0 x 23.0 x 71.0 cm
RESERVOIR CAPACITY: 94 liter (57 inch3).
APPROXIMATE WEIGHT: Tester 8 Carrying Case - 50 lb. (22.7 kg); Weight Set #1 K • 25 lb. (12 kg); #2K - 45 ib. (20 kg); #3K - 70 lb. (32 kg); #5K -110 lb. (50 kg.); #10K - 110 lb. (50 kg)

Comparators and Pressure Pumps -- $3000 - $7000

SPECIFICATIONS

ACCURACY: +/-0.25% of gauge span (10,000 PSI gauge. +/-0.5% of gauge span).
WETTED PARTS: Stainless steel, Monel™, brass and aluminum. Ni-Span C (temperature compensated gauges only), carbon steel. Buna N & optional Viton™, EPT O-rings.
MAX. OPERATING DIMENSIONS (LxWxD): 20.625 x 12 x 19 inches 53x30x48cm
APPROXIMATE WEIGHT: 55 Ibs. (25 kg)

HYDRA-LITE Portable Deadweight Tester -- $1500 - $3000

SPECIFICATIONS

ACCURACY: +0.1%, +0.05% of indicated pressure traceable to U.S. National Institute of Standards & Technology (NIST).
TEST FLUID: AAA tester oil MAX. OPERATING PRESSURE: 22,500 KPa (3,000 PSI).
WETTED PARTS: Stainless steel, brass and aluminum. Buna N o-rings and TEFLON back-up rings.
TEST CONNECTIONS: 1/4" NPT, 1/2" NPT. WEIGHTS: Hard non magnetic cast alloy weights or aluminum.
OVERALL DIMENSIONS (LxWxH): 9.0 x 9.0 x 10.0 inches 23.0 x 23.0 x 25.4 cm
APPROXIMATE WEIGHT: 25 Ibs. (11 kg) 45 Ibs. (20 kg)

Type PK11 Portable Pressure Tester -- $1900 - $5500

SPECIFICATIONS

ACCURACY: +/-0.05%, +/-0.025% or +/-0.015% of indicated reading. Stainless steel weights. Calibrated for International Standard Gravity 980.665 cm/sec2 or user's local gravity. +/-0 05% model available with non-magnetic die cast alloy weights as an economical alternative in non-corrosive environments. Calibrated at U.S. Mean Gravity 980.000 cm/sec2.
REPEATABILITY: 0.005% of output reading.
TEMP. COEFFICIENT: 0.0000167 of output pressure per degree C., based on 23°C.
SUPPLY PRESSURE: Instrument quality air per ISA Quality Standard S 7.3 Maximum: 100 PSl. Minimum: 30 PSI or 150% of output pressure, whichever is greater.
FLOW RATE: 1.0 SCFH at 4" H20 output. 11.0 SCFH at 30 PSI output.
CASE SIZE: 13-1/8 x 9-1/4 x 6-3/8 inches (33.3 x 23.5 x 16.2 cm) on 4"-104" H20 and 4"-254" H20 testers, and 13-1/8 x 13-1/8 x 81/4 inches (33.3 x 33.3 x 21.0 cm) on 4"-854" H20 testers
TOTAL WEIGHT: 14 to 23 pounds (6.4 to 10.5 kg)
INPUT & OUTPUT CONNECTIONS: V4" tube fitting.

Model T - 620 Hydraulic Pressure Tester -- $295 to $539

SPECIFICATIONS

ACCURACY: 10.5% of gauge span
TEST FLUID: Petroleum based oils, hydraulic fluids
OPERATING PRESSURE: 5000 PSIG maximum
WETTED PARTS: Aluminum, brass, stainless steel and Lexan
"O" RINGS: BUNAN
RESERVOIR CAPACITY: 1/2 pint
TEST CONNECTION: 1/4" NPT 24 inch (60.95 cm) long hose
WEIGHT: 3.5 Ibs. (1.59 Kg)

T-730/T-740/T-620/T-810 Pneumatic Pressure Tester Starts at $295

ACCURACY: +/-0.5%of gauge span
OPERATING PRESSURE: 300 PSIG max.
WETTED PARTS: Aluminum, brass, stainiess steel, NYLON and NYLATRON GS
"O" RINGS: BUNA-N
TEST CONNECTION: 1/4" NPT, 24" (60.95cm) long hose
WEIGHT: 3 Ibs. (1.36Kg)

EPC 2000 Pressure calibrator-- $3000

EPC 2000 Specifications

Accuracy: +/-0.05% of reading for readings from 20 to 100% of full scale +/-0.025% of full scale for readings from 0 to 20% of full scale.
Resolution: Five digit, floating point.
Traceability: Traceable to NIST. Full data and "as received/as left " data available at additional cost.
Pressure Ranges: 0 to 280 in. H2O (0 to 0.69 bar) 0 to 2000 psi 70 to 138 bar)
Units of measurement: bar, mbar, psi, kPa, MPa, Atm., kg/cm2 Torr, m H2O @ 4 C, mm H2O @ 20 C, m H2O @ 20zC, in H2O @ 20°C, in H20 @ 600C, mm FIg, in Hg¶
Media Compatibility: Any media compatible with 316L stainless steel and Hastelloy C276
Connections: 1/4 in. female, NPT
Current Range: 0 to 50 mA
Format options: mA, mA to %, mA to pressure
Connections: Standard banana jack, 3/4 in. centers
Voltage Range: 0 to 50 VDC
Format options: V, V to %, V to pressure
Connections: Standard banana jack, 3/4 in. centers
Switch Test Format options: None, closing and opening pressures are displayed simultaneously
General Recommended recertification/recalibration period: 1 year
Temperature range: 32 to 1 22°F (0 to 50°C) (operating) -4 to 1 58°F (-20 to 70°C) (storage)
Display: Two line LCD
Keypad: Six key membrane panel with tactile feedback
Enclosure: RFI-shielded plastic, with hanger
Size: 2-1/16 x 4-1/4 x 7-3/8 in. (5.2 x 10.8 x 18.7 cm)
Weight: 2.34 lb (1.06 kg)
Approvals: UL and c-UL Class I, Groups C, D hazardous locations, T3C. Cenelec EEx ib IIB T4. CE Mark.
Power: Two 9 V UL-approved lithium batteries

CAL_PAL Electronic Pressure Calibrator -- $2495

Current Range: 0 to 50 milliamps.
Accuracy: +0.1% of full scale plus least significant digit, including linearity, hysteresis, and repeatability.
Resolution: Four digits with floating decimal point.
Temperature Range: 30° to 130°F (0° to 55°C)
Temperature Effect: +0.01% of full scale per °C from 23°C (73°F)
Media Compatibility: Air, nitrogen, water, natural gas, hydraulic oil, glycol. (Consult AMETEK for other media.)
Over Pressure Protection: This gaug is protected by a pre-set relief valve.
Power Requirements: Two 9 VDC alkalins batteries. Battery Life: Approximately 40 hours.
Low Battery Indication: 'LOW-BATT'appears on display periodically.
Dimensions (HxWxD): 6.875 x S.75 x 2.625 inches 17.7x 9.6 x 6.7 cm
Weight: 3 Ibs. (1.36 kg)
Pressure Connection: The input prsssure connection is a 1/4" male NPT.
Versatile, all-in-one instrument
+ Cold junction compensated
+ Measure or simulate signals
+ Rugged, compact 8"x4.7JJx 1.3" (20.32 x 11.93 x 3.30 cm)
+ Programmable
+ Complete transmitter calibration
+ Readings in °C or °F

Viton(R) is a registered trademark of DuPont Dow Elastomers.