Bridge (Strain Gauge) Input Alarms
Bridge (Strain Gauge) Input Transmitters
Click on model number for data sheet and application information

Model

Input Ranges

Output Ranges

Features

Specify Input Range
Factory Configured
Minimum: 5mVDC
Maximum: 1200mVDC
Specify Excitation Voltage
4-10 VDC

1 DPDT 7A
Contact Set
Field Adjustable
See Data Sheet for Alarm Options

• Looptracker LEDs for Input
• Alarm Status LEDs
• Internal Bridge Excitation Source
• Push to Test/Reset
• Uses API-011 11-Pin Socket
• Specify Power; 115VAC Std.
  Opt. 230VAC or 9-30 VDC

2 SPDT 7A
Contact Sets
Field Adjustable
See Data Sheet for Alarm Options

Specify Input Range
Factory Configured
Others Available
1mV/V
2mV/V
3mV/V
5mV/V
10mV/V
20mV/V
50mV/V
100mV/V
200mV/V
Specify Excitation Voltage 4-10 VDC

Specify Output Range
Factory Configured
Others available
0-1V
0-5V
1-5V
0-10V
±5V
±10V
0-20mA
4-20mA

• Looptracker LEDs for Input and Output
• Internal Bridge Excitation Source
• Output Test Button
• Uses API-011 11-Pin Socket
• Specify Power; 115VAC Std.
  Opt. 230VAC or 9-30VDC

Field Configurable
0-5mVDC to
0-1200mVDC

Field Settable Excitation Voltage
0-10VDC in 1VDC Steps

18 Field Configurable Outputs
0-1V to ±10V
0-2mA to 0-20mA
4-20mA

• Minuteman One-Minute Setup
• I/O Looptracker LEDs
• Internal Bridge Excitation Source
• Drive up to 4 bridges
• Output Test Button
• Uses API-011 11-Pin Socket
• Specify Power; 115VAC Std.
  Opt. 230VAC or 9-30VDC

Field Configurable
0-5mVDC to
0-400mVDC

Field Settable Excitation Voltage
0-10VDC in 1VDC Steps

18 Field Configurable Outputs
0-1V to ±10V
0-2mA to 0-20mA
4-20mA

• Minuteman One-Minute Setup
• I/O Looptracker LEDs
• Full I/O/Power Isolation
• Internal Bridge Excitation Source
• Drive up to 4 bridges
• Output Test Button
• Uses API-011 11-Pin Socket
• Specify Power; 115VAC Std.
• Opt. 230VAC or 9-30VDC

Socket Sold Separately

Field Configurable
0-5mVDC to
0-400mVDC

Field Settable Excitation Voltage
0-10VDC in 1VDC Steps

18 Field Configurable Outputs
0-1V to ±10V
0-2mA to 0-20mA
4-20mA

• Minuteman One-Minute Setup
• I/O Looptracker LEDs
• Full I/O/Power Isolation
• Internal Bridge Excitation Source
• Drive up to 4 bridges
• Output Test Button
• DIN Rail or Surface Mount
• 55 mm Wide
• Specify Power; 115 VAC Std.
• Optional 230 VAC or 9-30 VDC

API SUM-025
Field Selectable Minuteman Setup
Bridge Summing Assembly Board with 4059 G, 115VAC powered

API SUM Board Instruction Manual

Provisions for up to Four 350 Ω or greater Bridges, Strain Gauges or Load Cells
Switch for Internal or External Excitation.
Call Factory for Special Configurations

11-Pin Socket for
API 4059 G or
API 4058 G

• Connect up to 4 Bridges
• 4 Trim Pots for Excitation Adjust
• 4 Trim Pots for Signal Adjust

Phone: 813-971-5001
Fax : 813-971-5117

Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Toll Free
1-800-783-6664

Sales@Omnicontrols.com

We guarantee a 24 hour response on all inquiries made via email.
For quicker response please call Omni Controls
at any of the above numbers