Bacharach Combustion Analyzers/Test Kits More Bacharach
- New ECA 450
- 300 Series Electronic Combustion Analyzers
- Monoxor Indicator Kit
- Model 300 NSX
- Monoxor, Oxor II, and Nonoxor II Detector Kits
- Fyrite Gas Analyzers
- Monoxor II Electronic Analyzer
- Fyrite II Hand-Held, Electronic Combustion Analyzer
- Oil Combustion Test Kit
- Gas Combustion Test Kit
- Sling Psychrometer
- Leakator 10 Battery-Powered Combustible Gas Detector
- CA40H Hand-Held Combustion Analyzer
 |
ECA 450 Combustion Efficiency & Environmental Analyzer
The ECA 450 is ideal for professionals concerned about combustion efficiency, environmental compliance, or both. It enables plant maintenance engineers and managers, industrial boiler/furnace service technicians, energy coordinators, compliance officers, environmental auditors and safety managers ensure that industrial equipment is burning efficiently while environmental regulations are being met. |
Unlike any other industrial grade combustion efficiency and environmental analyzer on the market today, the new ECA 450 from Bacharach conducts accurate combustion and emissions tests that will help you meet environmental regulations and ensure your equipment is burning efficiently. The ECA 450 measures Oxygen, Carbon Monoxide, Nitric Oxide, Nitrogen Dioxide and Sulfur Dioxide, as well as combustibles, temperature and draft. It also calculates combustion efficiency, excess air, carbon dioxide, NOx (Nitrogen Oxides) and pollution units.
The ECA takes continuous samplings of furnaces, boilers and other industrial combustion equipment for up to eight hours and generates precise, reliable combustion and environmental measurements and calculations. And it generates this complex data easily — even at selected intervals — enabling plants to make more accurate equipment adjustments and better assess pollution levels. The ECA 450 helps improve overall combustion efficiency, reduce fuel costs, and determine emissions compliance.
Features and Benefits:
- Large, easy-to-read fluorescent display that is visible from wide angles.
- Battery life of over eight hours.
- Modular design lets you add sensors as your needs change.
- Built-in printer and complete data downloading to a PC capability.
- EPA-ETV test verified performance.
- Measures and displays O2 and CO in the flue gas, pressure (draft), primary air temperature, and stack temperature.
- Calculates and displays combustion efficiency, excess air, and CO2.
- Optionally measures and displays NO, NO2, SO2, HC (methane equivalent combustibles), and CO in the high range of 4,000 to 8,000 ppm).
- Optionally calculates NOx (the combination of NO and NO2), and calculates CO, SO2, and NOx individually referenced to a user defined Oxygen level of between 0 and 15%.
- Optionally displays pollution conversions for CO, NO, NO2, and SO2. Pollution conversions include parts per million, pounds of pollutant per million BTU, milligrams of pollutant per cubic meter of gas, and grams of pollutant per gigajoule.
- Stores over 1000 individual combustion and/or pressure test records, which can later be recalled for viewing or printing.
- Stored test records can be downloaded to a personal computer and stored as a text file, which can then be opened in a spreadsheet program for analysis.
- Performs datalogging.
Ordering Information
| Part Number | Description |
|---|---|
| 24-7221 | Standard unit (O2, CO2, Stack Temp., Primary Air Temp., & Draft) |
| 24-3026 | CO (high) Sensor |
| 24-3027 | NO Sensor |
| 24-3028 | Combustibles Sensor |
| 24-3029 | NO2 Sensor |
| 24-3030 | SO2 Sensor (requires NO2 option) |
| 24-1124 | 20 ft Hose Extension |
| 24-3024 | 24 inch Probe |
| 24-3025 | 36 inch Probe |
| 24-7224 | Compact sample conditioner/probe assembly. Includes Peltier chiller/probe assembly, built-in filter, condensate pump, and 15 ft hose assembly. |
| 24-7223 | Heavy duty sample conditioning system (EPA-ETV test verified performance). Includes Peltier chiller unit with integral condensate pump, 15 ft heated hose assembly with probe, and built-in temperature controller. |
| 07-1644 | Filters (package of 3) |
| 24-7059 | Calibration Kit (does not include gas) |
| 104-1800 | Thermocouple Wand Extension |
| 104-4027 | Serial Cable (DB-9M to DB-9F) |
| 24-0980 | Printer Paper (5 rolls) |
| Alnor C02 | Bacharach |
| AEMC Carbon Monoxide | Extech Carbon Monoxide Meters |
| Amprobe Combustible Gas Detectors | Amprobe Accessories |
300 Series Electronic Combustion Analyzers*
* Discontinued and replaced with the Fyrizer
* Automatically calculate and display combustion efficiency of any boiler or furnace
* Multiple LED readouts display stack temperature, ppm Carbon Monoxide (CO), percent oxygen (02), percent excess air, percent carbon dioxide (C02) and percent efficiency on seven selectable fuels including natural gas liquid propane, coal, wood fuel oil 2, fuel oil 6, and bagasse
* A micro-processor controls the sequence of operation while calculating burner efficiency
* Programmed routines lead the operator through the proper procedures, signaling the appropriate action and waiting until correct steps are taken
* Factory calibrated to measure 0-25% oxygen, 0-3000 ppm CO, and 0-2000°F stack lamp
* Unit runs self-test on sensors when turned on
* High performance pump continuously draws filtered flue gas into unit for continuous monitoring
* Industrial hose, 12" stainless steel probe assembly
Model 300 NSX *
* Discontinued replaced by the
 |
|
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
 |
Leakator® Jr.Measuring only 6 inches in length with a 12-inch flexible probe, Bacharach’s Leakator Jr. is a low maintenance, easy-to-use portable combustible gas leak detector that is capable of pinpointing large and small leaks quickly with absolutely no calibration required. The Leakator Jr. is ideal for pinpointing combustible gas leaks; testing appliances in commercial, residential, and industrial applications; surveying gas pipelines; and inspecting valves, regulators, and meters on gas equipment. |
Features & Benefits:
- Compact Design: Fits in the palm of your hand (6"L x 2"W x 1.5"D)
- Visual Indicator: 1 LED (Variable Frequency)
- Audible Indicator: Loud audible ticking rate
- 2 Sensitivity Levels: Aids in pinpointing both large and small leaks
- Operational Status LED: Provides visual indication of instrument’s operational state
- Long Battery Life: Four AA batteries provide 14 hours of operation
- Lower Power Metal Oxide Sensor: Plug-in sensor
- 12 Inch Flexible Probe: For taking measurements in hard-to-reach locations
- Tough ABS Plastic Housing: Durable and rugged
- UL 913 Classification: Class I, Div. 2 for groups A, B, C & D
- 2 Year Warranty: On instrument
Gases Detected
- Acetone, Acetylene, Benzene, Butane, Ethanol, Ethylene Oxide, Gasoline, Hexane, Hydrogen, Industrial Solvents, Methane, Paint Thinners, Propane, Natural Gas, and Naptha.
Ordering Information
| Part Number | Description |
|---|---|
| 19-7075 | LEAKATOR Jr., including flexible 12 inch probe for combustible gases and vapors, instruction manual, sensor, cloth case, and batteries |
| 19-0575 | Replacement sensor |
| 19-0576 | Replacement sensor cover |
| 19-0577 | Replacement battery door |
Additional Product Information
(116K) Data Sheet
(680K) Instruction Card
