Biddle Testers
High-Potential Testers
AC and AC/DC High-Pot Testers
 |
|
| Description | Part Number | Price |
| 4 kV AC Hipot; 12.3 mA | mg230415 | $1,530.00 |
| 4 kV AC/5 kV DC Hipot; 12.3 mA | mg230425 | $1,980.00 |
BIDDLE AC and AC/DC High-Pot Testers
Rapid production-line testing to latest UL standards
Extra safety features
Rugged design for portability
The BIDDLE AC and AC/DC High-Pot Testers are designed for safety and ease of
operation, and readily adapt to development, maintenance and production testing.
Three models are available: two ac and one ac/dc. These instruments test the
dielectric strength of electrical insulation and the ground circuit continuity
of three-wire appliances and other devices. They feature front-panel adjustable
leakage current trip, one-second or continuous testing, and automatic failure
shutdown.
Model
a. Cat-230315, AC, 3 kV ac, 0.3-12mA
b. Cat-230415, AC, 4 kV ac, 0.3-12mA dc/0.4-17mA ac
c. Cat-230425, AC, 3 kV ac/4 kV dc, 0.3-12mA dc/0.4-17mA ac
Please select
ORDERING INFORMATION |
Item Cat.
No.
|
Included
Accessories
|
5 and 15 KV DC Dielectric Test Sets
 |
|
| Description | Part Number | Price |
| 5 kV DC DielectricTest Set; 2.5 & 5 kV; 5 mA | mg220005 | $2,320.00 |
Item Cat.
No.DC Dielectric Test Sets
|
Optional
Accessories
|
Continuously variable test voltage
Rugged field construction
Compact and portable
Air insulated, uses no oil
±2% accuracy
Leakage current measurement as low as 0.1 mA
Continuously variable test voltage with zero-start safety interlock
Fast charging of high-capacitance samples
Current guard circuit for highly accurate measurements
Strip chart recorder for hard copies (optionally available)
Input and output line circuit breaker
Output current overload relay
Zero-start interlock for high-voltage output
Push-button controls and indicating lights for high voltage ON/OFF
Full circuit breaker protection
Connection for external permissive and safety interlocks
Ground
Resistance Testers
 |
|
|
Three-Terminal Ground Resistance Tester
• Simple to operate
• For quick, routine single-electrode tests
• Direct readout in ohms
The Three-Terminal Ground Resistance Tester is the economical choice for
electrical contractors, plant electricians, telephone and CATV technicians
making routine ground resistance tests on single electrodes and other simple
grounding systems. The instrument is easy to use for quick measurement of
resistances from 0.5 to 500 ohms.
Included Accessories
Test record cards
Batteries, C Cell [4]
Instruction Manual
3-Terminal Analog Ground Tester; Battery 60 Hz
Data Sheet: mg250260.pdf
High Sensitivity Ground/Earth Resistance Tester
Auto Earth Tester
MEGGER DET2/2
 |
|
|
|
4-Terminal High Sensitivity Digital Ground Tester; Battery Data Sheet: mg250202.pdf |
|
|
• Accurately measures ground resistance under the most
demanding conditions The DET2/2 digital ground resistance tester provides a wide
resistance range from 0.010 O to 19.99 kilohms for testing larger or
more complex grounding systems and for difficult testing
environments, with ±0.5% accuracy and 0.001 O resolution.
Microprocessor control and advanced filtering simplify testing in
environments with high levels of interference. |
|
ORDERING INFORMATION |
Item (Qty) Order Code.
|
Included Accessories
Mains supply lead for battery charging
|
Accurately measures ground resistance under the most demanding
conditions
High resolution - 0.001 W, with autoranging
Simple menu driven operation
The DET2/2 digital ground resistance tester provides a wide resistance range from 0.010
W to 19.99 kilohms for testing larger or more complex grounding systems and for difficult
testing environments, with ±0.5% accuracy and 0.001 W resolution. Microprocessor
control and advanced filtering simplify testing in environments with high levels of
interference.
MEGGER DET3/2
Digital Earth Tester
 |
|
|
 |
4-Terminal Digital Ground Tester; Hand-Crank Data Sheet: mg250302.pdf |
|
• Three- or four-terminal measurement selected by a switch The MEGGER DET3/2 Digital Earth Tester is a compact instrument
designed to measure earth electrode resistance and soil resistivity.
The instrument uses the four-terminal method of measurement, in
which the resistance of the current circuit does not affect the
reading. The instrument circuit has been designed so the resistance
of the potential circuit also does not affect the measurement.
Pressing a latchable button converts the instrument from its
four-terminal measurement mode to a three-terminal one. The
reversing d.c. test current has a frequency of 128 Hz, which avoids
possible interference from other 50 and 60 Hz stray currents in the
vicinity of the earth electrode under test. In the interests of
safety, the maximum test voltage has been limited to 50 V. |
|
ORDERING INFORMATION |
Item (Qty) Order Code.
|
Included Accessories
Right-angled terminal adaptors to enable test leads with spadeconnectors, as in the accessory kit, or thest leads with bare ends to be used(4)
|
Four-Terminal Ground/Earth Resistance Tester
MEGGER DET5/4D and DET5/4R
 |
|
|
 |
4-Terminal Digital Ground Tester; Battery Data Sheet: mgDET5-4D.pdf |
|
• Simple, fully automatic operation The Megger® DET5/4D and DET5/4R are fully automatic, four
terminal instruments built into a rugged, water resistant case
giving protection for outdoor use. The instrument is suitable for
the testing of earth electrodes and measuring earth resistivity. |
|
DET5/4D 0.001-20 K Ohm, Batt, Dig Cat-DET5/4D
DET5/4R 0.001-20 K Ohm, Rech-Batt, Digital, Cat-DET5/4R
Three-Terminal Ground/Earth Resistance Tester
MEGGER DET62D
 |
|
|
 |
3-Terminal Digital Ground Tester; Battery Data Sheet: mgDET62D.pdf |
|
• Three-terminal measurement for ground electrode testing The DET62D is a fully automatic, three-terminal instrument
built into a rugged, water resistant case for outdoor use. The
instrument is suitable for the testing of single ground electrodes
such as lightning conductors and other small grounding systems, or
for measuring the resistance of conductors. Ground resistance can
be measured directly from 100 mO to 2 kO. |
|
|
|
|
High Sensitivity Ground/Earth Resistance
Tester
MEGGER DET2/2
|
4-Terminal High Sensitivity Digital Ground Tester; Battery Data Sheet: mg250202.pdf |
|
|
• Accurately measures ground resistance under the most
demanding conditions The DET2/2 digital ground resistance tester provides a wide
resistance range from 0.010 O to 19.99 kilohms for testing
larger or more complex grounding systems and for difficult
testing environments, with ±0.5% accuracy and 0.001 O
resolution. Microprocessor control and advanced filtering
simplify testing in environments with high levels of
interference. |
|
Multimeters
Power
Clamp Meter
5-10kv
Megger Table
Battery
Impedance (BITE) Tester Selection Guide
Digital
Low Resistance Ohmmeters DLRO Selection Guide
High
Pot Tester Selection Guide
Major Megger® Insulation
Resistance Tester Selection Guide
Ground
Resistance Tester Selection Guide
Insulation Resistance
Tester Selection Guide
Oil
Test Sets Selection Guide
Datacom/Telecom
Selection Guide
Transformer
Turns Ratio Testers
