|
|
|
Model
5000T-Digital Temperature Indicator and Miniature Datalogger
Multi-channel
Scanner Option with user selectable scan rates
Programmable
Digital Temperature Indicator and Data Logger
|
|
The Doric 5000 Series of single and multiple channel digital temperature indicators sets a new standard for performance, features, value and reliability. With built-in programmability, RS232 serial communications and powerful Windows-based software, the Doric 5000 is ideal for monitoring, testing and process control applications. Complete configuration of the instrument can be quickly performed from the front panel, including sensor input type, sampling rate, limit settings, and resolution. Current value and min/max values can be selected for display from the front panel. Thanks to its exclusive Viewer software, the Doric 5000 becomes a powerful PC-based data gathering, display and logging system. All front panel setup commands can be executed from your PC and all channel data, limit/alarm status and min/max values can be viewed simultaneously. In addition, you can label channel data, perform engineering unit calculations, log data and create exportable data files. With the multiple inputs option installed, the 5000 Series provides simultaneous monitoring of up to six thermocouple or three RTD channels. On single input models, an optional board may be installed which provides enhanced alarm functions as well as a scalable, linearized 4-20ma/0-10V analog output. Multiple InputsInstead of the dual alarm/analog output option, the Doric 5000 can be configured to accept up to six thermocouples or three platinum RTDs. All active inputs can be manually selected or automatically scanned. A front panel channel indicator accompanies the displayed data. Individual limits can be assigned to each channel. A built-in 5A rated form-C relay is energized whenever the limit on the selected channel is exceeded. Analog OutputAnalog output capability is also available in combination with the dual alarm option. A linearized output (4-20mA or 0-10V) with fully adjustable zero and span allows the instrument to serve as an indicating transmitter for a proportional controller, high-level input to a PC-based data converter or other recording device. Dual AlarmsWith the dual alarm option installed, the Doric 5000 can be configured to perform on/off control functions as well as process monitoring. Setpoints can be set for high, low or deviation. In addition, hysteresis (deadband) and delay can be programmed into each setpoint. Alarm conditions can be programmed for manual acknowledgment or for automatic reset. The dual alarm option comes equipped with two 5A rated form-C (NO/NC) relays, one for each alarm setpoint and flashing display whenever an alarm condition exists.
|
| General Specifications |
Size
1/8 DIN, 1.89" (H), 3.78" (W)
Repeatability
±1 Count
Stability with Temperature
Zero: 1µV per °C
Span: 0.01%
Thermocouple Reference Junction
Internal, automatic, 0.03°C per °C, 5°C to 45°C.
Break Detection
Upscale = 50nA, unit displays OL
Stability with Time
0.8° per year
Noise Rejection
NMRR: 60dB at 50-60Hz
CMRR: 120dB at 50-60Hz
(±0.1Hz with 250
|
| Thermocouple Range Table | ||||
| 1° Resolution | 0.1° Resolution | |||
| Sensor Type | Range/Display | Accuracy(±)* | Range/Display | Accuracy(±)* |
| J | -337 to
1403°F -205 to 762°C |
1°F+.03%
rdg 1°C+.03% rdg |
-99.9°
to 999.9°F -99.9° to 761.8°C |
0.9° 0.5° |
| K | -331 to
2510°F -202 to 1377°C |
1°F+.03%
rdg 1°C+.03% rdg |
-99.9°
to 999.9°F -99.9° to 999.9°F |
0.9° 0.5° |
| T | -346 to
755°F -210 to 401°C |
1°F+.03%
rdg 1°C+.03% rdg |
-99.9°
to 754.6°F -99.9° to 401.4°F |
0.9° 0.5° |
| E | -338 to
1835°F -205 to 1002°C |
1°F+.03%
rdg 1°C+.03% rdg |
-99.9°
to 999.9°F -99.9° to 999.9°F |
0.9° 0.5° |
| R | +32 to
3216°F 0 to 1769°C |
1°F+.05%
rdg 1°C+.05% rdg |
||
| S | +32 to
3218°F 0 to 1770°C |
1°F+.05%
rdg 1°C+.05% rdg |
||
| *Accuracy
±1 digit |
||||
| RTD Range Table | ||||
| 1° Resolution | 0.1° Resolution | |||
| Sensor Type | Range/Display | Accuracy(±)* | Range/Display | Accuracy(±)* |
| Platinum RTD | -329 to 1585°F | 0.8°,+0.03% | -99.9° to 999.9°F | 0.9° |
100 3-wire(0.00385) |
-200 to 863°C | 0.8°,+0.03% | -99.9° to 862.6°F | 0.5° |
| Platinum RTD | -332 to 1563°F | 0.8°,+0.03% | -99.9° to 999.9°F | 0.9° |
| 1003-wire (0.00392) |
-202 to 851°C | 0.8°,+0.03% | -99.9° to 862.6°F | 0.5° |
| *Accuracy
percentage of reading +1 digit |
||||
|
|
|
Programmable
Digital Process Indicator and Data Logger
|
|
The Doric 5000D of single and multiple channel digital process indicators sets a new standard for performance, features, value and reliability. With built-in programmability, RS232 serial communications and powerful Windows-based software, the Doric 5000 is ideal for monitoring, testing and process control applications. Complete configuration of the instrument can be quickly performed from the front panel, including sampling rate, limit settings, and resolution. Current value and min/max values can be selected for display from the front panel. Thanks to its exclusive Viewer software, the Doric 5000 becomes a powerful PC-based data gathering, display and logging system. All front panel setup commands can be executed from your PC and all channel data, limit/alarm status and min/max values can be viewed simultaneously. In addition, you can label channel data, perform engineering unit calculations, log data and create exportable data files. With the multiple inputs option installed, the 5000 Series provides simultaneous monitoring of up to six process input channels. On single input models, an optional board may be installed which provides enhanced alarm functions as well as a scalable, linearized 4-20ma/0-10V analog output. Multiple InputsInstead of the dual alarm/analog output option, the Doric 5000 can be configured to accept up to six 0-10 VDC or 0-20mA inputs. All active inputs can be manually selected or automatically scanned. A front panel channel indicator accompanies the displayed data. Individual limits can be assigned to each channel. A built-in 5A rated form-C relay is energized whenever the limit on the selected channel is exceeded. Analog OutputAnalog output capability is also available in combination with the dual alarm option. A linearized output (4-20mA or 0-10V) with fully adjustable zero and span allows the instrument to serve as an indicating transmitter for a proportional controller, high-level input to a PC-based data converter or other recording device. Dual AlarmsWith the dual alarm option installed, the Doric 5000 can be configured to perform on/off control functions as well as process monitoring. Setpoints can be set for high, low or deviation. In addition, hysteresis (deadband) and delay can be programmed into each setpoint. Alarm conditions can be programmed for manual acknowledgment or for automatic reset. The dual alarm option comes equipped with two 5A rated form-C (NO/NC) relays, one for each alarm setpoint and flashing display whenever an alarm condition exists.
|
| General Specifications |
Size
1/8 DIN, 1.89" (H), 3.78" (W)
Accuracy Specification
0.02% RDG +/-1 digit
Sensitivity
Maximum:200uV/Count; 0.4uA/Count
Minimum:1 count
Repeatability
±1 Count
Stability with Temperature
Zero: 1µV per °C
Span: 0.01%/rdg/°C
Noise Rejection
NMRR: 60dB at 50-60Hz
CMRR: 120dB at 50-60Hz
(±0.1Hz with 250
|
