Portable Calibrators  
Pressure, temperature, electrical and frequency
Lightweight and rugged battery powered design
High performance, simple to use
Commissioning, calibration, trouble shooting
QA compliant calibration software
Low cost of ownership
The wide range of Druck portable pressure, temperature, electrical and frequency calibrators set new standards worldwide. Available in standard or Intrinsically Safe formats they are compact, rugged, ergonomically designed and offer advanced yet practical features which simplify precision calibration in the field.
* DPI 515 SCM
  Pressure Controller Sensor Calibration Module - Option H
    Calibrates mA, mV, V output sensors
DPI 515 SCM
Pressure Controller Sensor Calibration Module - Option H
DPI 515 SCM  
Calibrates mA, mV, V output sensors
Accuracy to 0.01%Rdg + 0.002% F.S.
Ranges 0 to 25mA, ±135mV and 0 to 11V
Sensor excitation 10Vdc regulated and 24Vdc
Simultaneous pressure and electrical display
Quick connections via cable and probes
The Sensor Calibration Module (SCM) option is a self-contained electrical excitation and measurement system. It enables the DPI515 Pressure Controller to calibrate pressure sensors/transmitters without any additional electrical equipment. This insures a fully integrated, simple to operate sensor calibration system with simultaneous pressure and electrical control. Test productivity is therefore increased and system downtime kept to a minimum.

 
* DPI 605R
  Rack Mount Precision Pressure Indicator
    Pressure ranges from -14.5 to 10,000 psi
DPI 605R
Rack Mount Precision Pressure Indicator
DPI 605R  
Pressure ranges from -14.5 to 10,000 psi
Precision 0.025% of reading
Dual pressure/electrical readout
Voltage, current and temperature measurement
Ideal for calibration bench applications
Data storage and standard RS 232 interface
The DPI 605R is a rack mounting version of the popular DPI 605 precision portable pressure calibrator. It is ideal for use within fixed installations where high accuracy measurement of pressure and electrical parameters is required. Advanced communications are provided and optional PC software is available to provide a full test and calibration management solution.

 
* DPI 320/325 Series
  Portable High Pressure Pneumatic Calibrators
    High accuracy 0.025% FS
DPI 320/325 Series
Portable High Pressure Pneumatic Calibrators
DPI 320/325 Series  
High accuracy 0.025% FS
Generates pneumatic pressures to 3000 psi
Dual channel readout: pressure and electrical
Self contained rechargeable gas cylinder
RS 232 interface and documenting versions
Coarse/fine adjust selection
 
The DPI 320/325 Series of high pressure pneumatic calibrators are the latest additions to a comprehensive range of compact and rugged instruments.
This range of portable calibrators is designed to make testing and calibration of high pressure instruments and systems both quick and simple. Two versions are available, the DPI 320 which is the standard model and the DPI 325 which has full documenting capability.

 
* UPS III
  Loop Calibrator
    Measure or Source 0 to 24 mA
UPS III
Loop Calibrator
UPS III  
Measure or Source 0 to 24 mA
Accuracy 0.01% of reading
Dual mA and % readout, linear or flow
Step, Span Check, Valve Check, Ramp
60 Vd.c. measurement and continuity
HART® compatible
 
* DBC 150/650 Series
  Dry Block Temperature Calibrators
    Ranges from -45° to +650°C
DBC 150/650 Series
Dry Block Temperature Calibrators
DBC 150/650 Series  
Ranges from -45° to +650°C
Rapid heating, cooling and setting
Switch test, ramp, step and preset functions
Reads set temperature and device output simultaneously
Measures reference probe, RTD's, T/C's mA,
mV and ohms
Automated calibration via RS 232
 
Two models cover temperatures from -45°C below ambient to 650°C available as a stable source or complete calibration system.

 
* DPI 603
  Portable pressure calibrator
    Accuracy ±0.075% FS
DPI 603
Portable pressure calibrator
DPI 603  
Accuracy ±0.075% FS
Integral pressure/vacuum generation
Standard ranges up to 300 psi g
5 digit LCD display, multiple engineering units
Dual pressure and electrical readout
Transmitter supply and measurement
Current loop verification test current
Vacuum generation available
The affordable DPI 603, which extends the Druck range of rugged portable battery powered pressure calibrators, has standard ranges of -14.7 to +15 psi, 30 psi, 100 psi or 300 psi gauge with an accuracy of ±0.075% FS.

 
* DPI 605
  Precision portable pressure calibrator
    Range -14.7 to +300 psi
DPI 605
Precision portable pressure calibrator
DPI 605  
Range -14.7 to +300 psi
Accuracy ±0.025% of reading
Barometric accuracy ±0.015%
ISO 9000 systems compatible
Storage of test results
Integral pressure/vacuum generation
Voltage and current outputs
RS 232 digital interface
The DPI 605 precision pressure calibrator which combines Druck’s expertise in micromachined integrated strain gauge and vibrating silicon pressure sensors, microprocessor technology and ergonomic styling, has an accuracy of 0.025% of reading. It is a portable battery powered instrument with an electrical measurement and supply capability providing simultaneous pressure and electrical displays, data storage and an RS 232 interface.


* DPI 610 Firmware
  DK 155 V2.07 (1Mb)
    Only suitable for DPI 610's with
DPI 610 Firmware
DK 155 V2.07 (1Mb)
DPI 610 Firmware  
Only suitable for DPI 610's with
the following bootrom and firmware.
 
Bootrom DK 154 V1.03
Firmware DK 155 V2.05 or later
Version data is shown on DPI 610 power up.
 
Download
* DPI 610/615 LP
  Portable Low Pressure Calibrators
    Generates and measures very low pressure
DPI 610/615 LP
Portable Low Pressure Calibrators
DPI 610/615 LP  
Generates and measures very low pressure
Ranges ±1 to ±50 inH2O
Accuracy 0.05% FS
Dedicated tasks and dual readout
Automatic system vent and display zero
RS 232 interface and documenting versions
 
The DPI 610/615 Low Pressure Calibrator versions enable the end user to calibrate Draft range instrumentation in the field. This feature minimizes the effects of moving the unit under test and any offsets that may occur. The test data can then be stored for uploading to your computer at a more convenient time


* DPI 610/615 Series
  Portable Pressure Calibrators
    Ranges -14.7 through 10,000 psi
DPI 610/615 Series
Portable Pressure Calibrators
DPI 610/615 Series  
Ranges -14.7 through 10,000 psi
Accuracy from 0.025% Full Scale
Integral combined pressure/vacuum pump
Dual readout: input and output
4 to 20 mA loop test: auto step and ramp
Intrinsically safe version
RS 232 interface and fully documenting version
Remote pressure sensors
The technically advanced Druck DPI 610 and DPI 615 portable calibrators are the culmination of many years of field experience with the company’s DPI 600 series.
This self-contained, battery powered package contains a pressure generator, fine pressure control, device energizing (not IS version) and output measurement capabilities, as well as facilities for 4 to 20 mA loop testing and data storage. The rugged weatherproof design is styled such that the pressure pump can be operated and test leads connected without compromising the visibility of the large dual parameter display. The mA step and ramp outputs and a built-in continuity tester extend the capabilities to include the commissioning and maintenance of control loops


* DPI 610
  Flash software download program
    The DPI 610 update program is used
DPI 610
Flash software download program
DPI 610  
The DPI 610 update program is used
for updating your DPI 610 calibrator
running DK 155 type firmware with the latest
firmware version. Download the
appropriate firmware separately
Download
* DPI 705
  Digital pressure indicator
    Ranges 0 to 1 psi through to 10,000 psi
DPI 705
Digital pressure indicator
DPI 705  
Ranges 0 to 1 psi through to 10,000 psi
0.1% FS accuracy
Rugged, lightweight handheld design
Leak test, tare, max/min and filter
Intrinsically safe version
Standard ranges available from stock
Optional pneumatic and hydraulic hand pumps
 
The Druck DPI 705 handheld pressure indicator combines tough and rugged design with accurate and reliable pressure measurement. New materials and technical innovations from over fifteen years experience with portable pressure testers has resulted in this advanced new product. Compact, robust and lightweight, the DPI 705 is designed for single handed operation. It provides many essential features required for routine maintenance and system troubleshooting. Barometric version available.


* DPI 720
  Multifunction Process Calibrator
    Measures and simulates RTD's, T/C's and resistance
DPI 720
Multifunction Process Calibrator
DPI 720  
Measures and simulates RTD's, T/C's and resistance
Measures/sources current and volts
Inputs and outputs fully isolated
Reads input and output simultaneously
Transmitter calibration and simulation
Loop check with step and ramp outputs
 
The Druck DPI 720 is an extremely versatile and cost effective multifunction process calibrator which replaces many single function instruments with a single compact handheld unit. The DPI 720 measures, sources and simulates most process signals and displays both input/output readings simultaneously.


* IDT 600
  Ingress Dirt moisture Trap
    Use with all Druck Portable Calibrator Products
IDT 600
Ingress Dirt moisture Trap
IDT 600  
Use with all Druck Portable Calibrator Products
The IDT 600 is an effective barrier for protecting Druck portable pressure calibrators against the ingress of dirt and moisture which may be present in the gaseous pressure media or pneumatic devices under test. Installed directly onto the standard calibrator pressure port, regular use of the IDT 600 will prevent contamination of the calibrator pneumatic system, improving it’s long term reliability and reducing maintenance costs. In addition it prevents cross contamination of the devices under test.

 
* Intecal - W
  Calibration management software
    Supports Druck Portable Calibrators
Intecal - W
Calibration management software
Intecal - W  
Supports Druck Portable Calibrators
Supports Druck Workshop Calibrators
Supports any calibrator by manual data entry
Reduces calibration cost, eliminates errors
Four level security, protected calibration data
PCMCIA card and RS232 data transfer
Quick to install, easy to learn and use
Intecal-W is an easy to use calibration management software for generating calibration procedures, scheduling work and documenting results. It is designed for efficient calibration and management of process and industrial instrumentation by technicians, contractors, manufacturers and service companies.

Demo available in Download section.


* Intecal-W 2.5
  DPI 515 patch (1Mb)
    Windows 95/98/ME/NT4/2000
* Intecal-W
  Demo software (9.3 Mb)
    Windows 95/98/NT4/2000
* Linkpak - W --> FREE UPGRADE avialable. Click HERE to order.
  Calibration software for portable calibrators
    Windows based software
* Linkpak-W 5.1
  Demo software (6Mb)
    Windows based software
* MCX II
  Portable documenting calibrator
    Eliminates field calibration errors
* MCX-II
  Update program and firmware UT 301 V 1.05 (1Mb)
    Windows 95/98/NT
* MTC 2000
  Marine Test Case
    On-board pressure / temperature calibration
* PV 411
  Multi-function pressure generator
    Hydraulic pressures to 10,000 psi
* Portable Calibrators
  Product guide
    Pressure, temperature, electrical and frequency
* TRX II Series
  Portable documenting calibrators
    Simulates and Reads RTD's and thermocouples
* TRX-II / TRX-II IS
  Update program and firmware (1Mb)
    Windows 95/98/NT
* Third Party Software
  Druck Portable Calibrators
    Calibration software supporting
* UPS - II
  Smart mA loop calibrator
    Sources and reads milliamps
UPS - II
Smart mA loop calibrator
UPS - II  
Sources and reads milliamps
Powers and reads 2-wire transmitters
Reads and simulates DP transmitters in % of flow
Auto-stepping and auto ramping
Intrinsically safe version available
The UPS-II can power (24 Vdc) and read 2-wire transmitters to perform field calibrations. Output currents are adjustable to a resolution of 10 microamps in both source and transmitter simulation modes


* UPS - IS
  Intrinsically safe loop calibrator
    Sources and reads milliamps
UPS - IS
Intrinsically safe loop calibrator
UPS - IS  
Sources and reads milliamps
Simulates 2-wire transmitters
Powers and reads 2-wire transmitters
Reads and simulates DP transmitters in % of flow
Fixed calibration currents
Auto-stepping for handsfree calibration
Auto-ramp cycling for endurance tests
Intrinsically safe version available


* VAX II
  Multi calibrator for PLC's and control systems
    Generates pulses and read frequency
VAX II
Multi calibrator for PLC's and control systems
VAX II  
Generates pulses and read frequency
Converts any input into any output signal
Powers, reads and simulates digital sensors
Sources and reads mV, V and mA
Powers, reads and simulates 2-wire transmitters
Simultaneous input and output readings
Outputs pre-set numbers of pulses
Scale factors for flow readings
The VAX-II a lightweight portable calibrator for PLC’s and control system testing. A compact and easy to use design allows the operator to generate pulses and read frequency to 10,000 Hz, power, read and simulate digital sensors and two wire transmitters with traceability to National Institute of Standards and Technology (NIST).


* DPI 811/812
  RTD Indicator/RTD Loop Calibrator
    Measure and source RTD’s
DPI 811/812
RTD Indicator/RTD Loop Calibrator
DPI 811/812  
Measure and source RTD’s
2, 3 and 4 wire auto detection
Temperature test and maintenance
Transmitter calibration
Loop set-up and diagnostics
Switch testing
The Druck DPI 800 Series is a range of rugged, highly reliable and simple to use hand held instruments.

Advanced features and technical innovation address more applications in less time and deliver results you can depend on. In short, it's exactly what you need - calibrator
performance at a test tool price.

 
* DPI 800/802
  Pressure Indicator / Loop Calibrator
    Ranges from 1psi to 10,000 psi
DPI 800/802
Pressure Indicator / Loop Calibrator
DPI 800/802  
Ranges from 1psi to 10,000 psi
Single or dual range configuration
Pressure test and maintenance
Transmitter calibration
Loop set-up and diagnostics
Switch testing
The Druck DPI 800 Series is a range of rugged, highly reliable and simple to use hand held instruments.

Advanced features and technical innovation address more applications in less time and deliver results you can depend on. In short, it's exactly what you need - calibrator
performance at a test tool price.

 
 

Phone: 813-971-5001
Fax : 813-971-5117

Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Toll Free
1-800-783-6664

email sales@omnicontrols.com
Sales@Omnicontrols.com

We guarantee a 24 hour response on all inquiries made via email.
For quicker response please call Omni Controls
at any of the above numbers

 


Please Note: All prices subject to change without notice
copyright©omnicontrols.com - All Rights Reserved.
Terms and Conditions for Omni Controls Inc - online. Legal Disclaimer
Supplementary Information and Cover Art Copyright omnicontrols.com. All rights reserved.

copyright © omnicontrols 2005
Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Email: sales@omnicontrols.com

Phone: 800-783-6664
Fax: 813-971-5117