Model MC6 Multi-Cal Benchtop Calibrator performs a wide variety of simple and complex pressure based measurement, test, and calibration operations. Modular sensor design allows user to select pressure measurement range for application flexibility. Calibrator can accommodate up to two interchangeable pressure modules (sold separately below) in any combination of range or accuracy.

Simultaneously display two separate measurements on the two line, alphanumeric display. Readings can be displayed in a choice of twelve preprogrammed engineering units or any single user-defined unit. Calibrator features min/max recall, hi/lo alarm, percentage of full scale pressure readings, mA/voltage measurement, leak rate and pressure decay measurement, switch testing capabilities, including trip point and dead band, and velocity/volume flow rates.

Quickly document calibration procedures using the data logging feature which stores up to 384 sets of pressure and time/date stamped measurements. The automatic % error calculation simplifies transmitter calibration. Easily upload stored data to an IBM compatible computer via the RS232 two-way communications port. Calibrators and modules include certification to NIST traceability--ideal as a secondary standard for calibrating pressure equipment.

Multi-Cal Pressure Calibrator includes utility software, test leads, protection module, adjustment handle, AC adapter, and instruction manual.

Multi-Cal Pressure Modules are interchangeable and available in a wide selection of pressure ranges and accuracies. Benchtop calibrator accepts up to two pressure modules. Modules include NIST calibration certification.

POPULAR MODELS

Model Number	Description	Price
MC6	BenchtopCalibrator	$1625.00

POPULAR MODELS

Model Number	Range	Price
MC1000	0.25" H2O Differential Pressure, ±0.07	$1200.00
MC1001	0.50" H2O Differential Pressure, ±0.07	$1200.00
MC1004	5.00 H2O Differential Pressure, ±0.06	$980.00
MC1006	25" H2O Differential Pressure, ±0.06	$980.00
MC2010	5.0 psig Gauge Pressure, ±0.05	$780.00
MC2012	15.0 psig Gauge Pressure, ±0.05	$780.00
MC2016	100.0 psig Gauge Pressure, ±0.05	$780.00

OPTIONS- Consult us at 800-873-6664 for other pressure ranges and accuracies. FM approved models are also available.

SPECIFICATIONS
Accuracy: Differential Pressure Modules: ± 0.06% FS,
Gauge Pressure Modules: ± 0.05% FS,
Voltage Input: ± 0.025% FS @ 0/10 VDC, ± 0.10% FS @ 0/30 VDC,
Current Input: ± 0.03% FS @ 0/20 mA, ± 0.05% FS @ 0/50 mA.
Repeatability: Ranges ≤ 0/2 psi: ± 0.05% of span,
Ranges ≥ 0/5 psi: ± 0.02% of span.
Sensitivity: ± 0.002% of span with dampening 1 part in 50,000 (max).
Overpressure: Differential Pressure Modules: 50 psi positive direction,
15 psi negative direction, Gauge Pressure Modules: 2 x range (0/5 psi to 0/1000 psi).
Media: Clean, dry, nonconductive, noncorrosive gases.
Output: RS232 serial interface, 9-pin.
Baud rate: 300, 1200, 2400, or 9600, selectable.
Alarm Output: SPST from C 110 VDC, 120 VDC (max), 1 A (max), 30 W,
62.5 VA (resistive).
Dampening: (Measurement averaging) programmable from 0 to 16 consecutive readings.
Temperature Compensation: 20 to 120°F (-7 to 49°C).
Temperature Error: Maximum of ± 0.004% of span per °F over compensated range
for zero and span.
Temperature Effect Electrical Measurement: ± 0.001% of span per °F
over compensated range.
Ambient Operating Temperature: 32 to 120°F (0 to 49°C).
Storage Temperature: -4 to 158°F (-20 to 70°C).
Power Supply: 110 VAC/60 Hz adapter, 500 mA.
Engineering Units: inH₂O, psi, inHg, kPa, mbar, bar, cmH₂O, mmHg, ftSW, MPa, mmH₂O, kgcm² and user-defined.
Display: Alphanumeric LCD, 0.37" (9.5 mm) height per line, 2 lines, 16 characters/line.
Display Update: 100 msec.
Computer Requirements: IBM compatible 386 or above and
Windows™ 3.1 or later with 2mB RAM and 2mB hard drive disk space, one serial port.
Process Connection: 1/8" Female NPT.
Electrical Connections: Standard banana jacks.
Housing: ABS plastic.
Weight: Calibrator: 3.0 lb (1.4 kg), Pressure Module: 0.5 lb (0.3 kg).

APPLICATIONS:
Pressure measurement for clean room control, filter performance monitoring, HVAC testing and setup, draft measurement, airflow measurement control, differential pressure measurement in laminar flowhoods, paint booths, industrial ovens and fume hoods. Use as a secondary standard for calibrating pressure equipment.

Series MC Portable Multi-Cal Pressure Calibrator performs a wide variety of simple and complex pressure based measurement, test, and calibration operations. Modular sensor design allows user to select pressure measurement range for application flexibility. Calibrator can accommodate up to two interchangeable pressure modules (sold separately below) in any combination of range or accuracy.

Simultaneously display two separate measurements on the two line, alphanumeric display. Readings can be displayed in a choice of seven preprogrammed engineering units or any single user-defined unit. Calibrator features min/max recall, hi/lo alarm, percentage of full scale pressure readings, mA/voltage measurement, leak rate and pressure decay measurement, switch testing capabilities, including trip point and dead band, and velocity/volume flow rates.

Quickly document calibration procedures using the data logging feature which stores up to 384 sets of pressure and time/date stamped measurements. Easily upload stored data to an IBM compatible computer via the RS232 port. Calibrators and modules include certification to NIST traceability - ideal as a secondary standard for calibrating pressure equipment.

Multi-Cal Pressure Calibrator includes utility software, test leads, protection module, adjustable had strap, AC adapter, two 9V batteries, instruction manual, and hard carrying case.

Multi-Cal Pressure Modules are interchangeable and available in a wide selection of pressure ranges and accuracies. Handheld calibrator accepts up to two pressure modules. Modules include NIST calibration certification.

POPULAR MODELS

CP40OPTIONS- Consult factory for other pressure ranges and accuracies. FM approved models are also available.

SPECIFICATIONS
Accuracy: Differential Pressure Modules: ±0.06% FS, Gauge Pressure Modules: ±0.05% FS, Voltage Input: ±0.025% FS @ 1/10 VDC, ±0.10% FS @ 0/30 VDC, Current Input: ±0.03% FS @ 1/20 mA, ±0.05% FS @ 0/50 mA.
Repeatability: Ranges ≤0/2 psi: ±0.05% of span, Ranges ≥0/5 psid: ±0.02% of span.
Sensitivity: ±0.002%of span with dampening 1 part in 50,000 (max.).
Overpressure: Differential Pressure Modules: 50 psi positive direction, 15 psi negative direction, Gauge Pressure Modules: 2x range (0/5 psi to 0/1000 psi.
Media: Clean, dry, nonconductive, noncorrosive gases.
Output: RS232 serial interface, 9-pin.
Baud Rate: 300, 1200, 2400, or 9600, selectable.
Alarm Output: SPST form C 110 VDC, 120 VDC (max.), 1 A (mas.), 30 W, 62.5 VA (resistive).
Dampening: (Measurement averaging) programmable from 0 to 16 consecutive readings.
Temperature Compensation: 20 to 120°F (-7 to 49°C).
Temperature Error: Maximum of ±0.004% of span per °F over compensated range for zero and span.
Temperature Effect Electrical Measurement: ±0.001% of span per °F over compensated range.
Ambient Operation Temperature: 32 to 120°F (0 to 49°C).
Storage Temperature: -4 to 158°F (-20 to 70°C).
Power Supply: Internal: two 9 VDC alkaline batteries,External: AC adapter 9 VDC, 500 mA.
Battery Life: 30 hours (approximate).
Engineering Units: inH₂O, psi, inHg, kpa, mbar, cmH₂O, mhG, and user-defined.
Display: Alphanumeric LCD, 0.37" (9.5 mm) height per line, 2 lines, 16 characters/line.
Display Update: 100 msec.
Process Connection: 1/8" Female NPT.
Electrical Connections: Miniature recessed banana jacks.
Housing: ABS plastic.
Weight: Calibrator: 2.2 lbs. (1.3 kg), Pressure Module: 0.5 lb. (0.3 kg).

APPLICATIONS:
Pressure measurement for clean room control, filter performance monitoring, HVAC testing and setup, draft measurement, airflow measurement control, differential pressure measurement in laminar flowhoods, point booths, industrial ovens and fume hoods. Use as a secondary standard for calibrating pressure equipment.

Dual function CA20 Thermocouple Calibrator can be used to source Type J thermocouple output values or measure Type J thermocouples. Quickly select output value using the rotary switch with coarse and fine adjustments. Model CA20 accepts up to two Type J thermocouples and features data hold and max functions. Measurements are displayed in a 3½-digit backlit display. Units include a 4" (100 mm) Type J bead wire temperature probe, calibration cable, 9 V battery and instruction manual.
POPULAR MODELS

Model Number	Description	Price
CA20	Thermocouple Calibrator	$159.00

SPECIFICATIONS
Thermocouple Type: Type J.
Measurement Range: -40 to 1400°F (-40 to 760°C), selectable.
Calibration Range: -328 to 2192°F (-210 to 1200°C).
Accuracy: ±0.1% rdg + 2°F on -40 to 1400°F; ±0.1% rdg +1°C on -40 to 760°C, over operating temperature of 64 to 82°F (18 to 28°C).
Resolution: Selectable 1° or 0.1 °.
Temperature Coefficient: 0.1 times the applicable accuracy specification per °F from 32 to 64°F and 82 to 122°F (0 to 18°C and 28 to 50°C).
Reading Rate: 2.5 times/second.
Input Protection: 24 VDC or 24 VAC rms max input voltage on any combination of input pins.
Operating Temperature: 32 to 122°F (0 to 50°C) max 80% RH.
Storage Temperature: -4 to 140°F (-20 of 60°C) max 70% RH.
Display: 0.8" (20 mm) height, 3½-digit LCD with switchable back light.
Thermocouple Connection: Standard female mini-connector.
Battery: 9V Alkaline (Included).
Battery Life: 200 hours typical.
Housing: ABS Plastic.
Weight: 15.5 oz. (440 g).

Dual function CA10 Thermocouple Calibrator can be used to source Type K thermocouple output values or measure Type K thermocouples. Quickly select output value using the rotary switch with coarse and fine adjustments. Model CA10 accepts up to two Type K thermocouples and features data hold and max functions. Measurements are displayed on a 3½-digit backlit display. Units include a 4" (100 m) Type K bead wire temperature probe, calibration cable, 9 V battery and instruction manual.

Calibrate electronic process instruments such as controllers, transmitters, transducers or recorders with Model CAL10 Thermocouple Calibrator. Model CAL10 is designed to independently measure and simulate dc mV or V and common thermocouple signals (Type J, K, T, E, J (DIN), and T (DIN) or measure current. Input/output can be operated simulanteously with independent range selection.

A multitude of programmable functions, such as square root extraction for flow signals, ramp/step increment value, selectable engineering units, isolated signal conversion or automatic changing of the output value simplify many calibration tasks. Calibration values can be stored and recalled using the Low, Mid, or High keys. Cold junction compensation can be selected for automatic or manual. Program the automatic shut-off to conserve battery life.

The Model CAL10 calibrator features 500 VDC input/output isolation and reverse polarity protection. The unit includes three 9V batteries, two sets of dual test leads, a dual binding post adapter, carrying case, and instruction manual.

POPULAR MODELS

Model Number	Description	Price
CAL10	Thermocouple Calibrator	$1195.00

SPECIFICATIONS
Input Ranges: Voltage: -10 to 24 mV DC/-10 to 120 mV DC (autoranging), 0 to 12 VDC; Current: 0 to 24 mA DC; Temperature: see table below.
Accuracy: Voltage and Current: ±0.025% of range; Temperature: see table below.
Output Ranges: 0 to 120 mV DC (2K Ω min. load); 0 to 12 VDC (2K Ω min. load); Thermocouple Types J, K, T, E, J (DIN), and T (DIN) similiar to input ranges.
Resolution: 0.1°C/F.
Response Time: 5 seconds.
Temperature Limits: -4 to 113°F (-20 to 45°C).
Display: 24-character LCD, 3/16" (5 mm) character height.
Indication: Up to 5 digits depending on range.
Electrical Connections: Standard banana jacks on 3/4" (19 mm) centers.
Power: Three 9V alkaline (included).
Battery Life: 100 hours, approximate.
Weight: 1.15 lbs. (0.52 kg).

 

T/C	Range	Accuracy
J	-250 to 2192°F 346 to -250°F	±1°F ±2°F
K	-350 to 2500°F -380 to -350°F -420 to -380°F	±1°F ±3°F ±5°F
T	-100 to 1112°F -300 to -100°F -400 to -300°F	±1°F ±3°F ±5°F
E	-400 to -1832°F -420 to -400°F	±1°F ±2°F

Phone: 813-971-5001
Fax : 813-971-5117

Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Toll Free
1-800-783-6664

Sales@Omnicontrols.com

We guarantee a 24 hour response on all inquiries made via email.
For quicker response please call Omni Controls
at any of the above numbers