Flowline Controllers

Application
LeveLink Multi-Channel Relay Controller LC55-1001	For multi-tank relay control, indication, data logging and telemetry, package the LeveLink multi-channel controller with any of our level transmitters or level switches. The general purpose controller is a complete level management system with up to sixteen sensor inputs, eight relay outputs and a RS485 data connection. For remote data acquisition and calibration of your process, install the optional modem and connect to LeveLink through the available data website or software packages. With a NEMA 4X, wall mount enclosure, LCD display and advanced data logging functions, the LeveLink multi-channel controller is the ultimate solution for tank automation and inventory control.
Specifications

LC52 Continuous Relay Controller
Supply voltage:	120 VAC (240 VAC), 50 - 60 Hz.
Consumption:	5 Watts
Sensor input:	(1) Transmitter
Sensor supply:	24 VDC @ 1.5 Watts
Loop power:	4-20 mA, 18 VDC
Set point adjustment:	Push button
Configuration:	1: High or low level alarm 2: High and low level alarm 3: Automatic fill or empty 4: Automatic fill or empty with alarm
LED display:	Alphanumeric, 3.5 digit
LED indicators:	Power and relay status
Bar graph display:	4-20 mA with set points
Alarm indication:	Amber: < 4 mA
Red:	> 20 mA
Security:	Lock out mode
Relay types:	(1) SPDT (1) Latched SPDT
Relay rating:	250 VAC, 10A, 1/2 hp.
Relay mode:	Selectable, NO or NC
Relay latch:	ON or OFF
Time delay:	0-60 seconds
Repeater output:	4-20 mA, 12-36 VDC
Fail safety:	Power fail-safe
Temperature range:	F: -40 degrees to 158 degrees C: -40 degrees to 70 degrees
Enclosure mounting:	35 mm DIN (EN 50 022)
Enclosure material:	Polypropylene (U.L. 94 VO)
CE Compliance:	EN 50082-2 immunity EN 55011 emission EN 61010-1 Safety

Application
Continuous Relay Controller LC52-1001	For single tank relay control and indication, package the continuous relay controller with any of our level transmitters. The general purpose DIN controller is commonly used for the automatic filling or emptying of a tank between two set points with an additional high or low level alarm set point. A single latched relay performs the automatic pump or valve control, while a second relay provides an independent alarm. With a built-in power supply and analog repeater, the continuous relay controller offers a complete solution for single tank automation.
Specifications

LC52 Continuous Relay Controller
Supply voltage:	120 VAC (240 VAC), 50 - 60 Hz.
Consumption:	5 Watts
Sensor input:	(1) Transmitter
Sensor supply:	24 VDC @ 1.5 Watts
Loop power:	4-20 mA, 18 VDC
Set point adjustment:	Push button
Configuration:	1: High or low level alarm 2: High and low level alarm 3: Automatic fill or empty 4: Automatic fill or empty with alarm
LED display:	Alphanumeric, 3.5 digit
LED indicators:	Power and relay status
Bar graph display:	4-20 mA with set points
Alarm indication:	Amber: < 4 mA
Red:	> 20 mA
Security:	Lock out mode
Relay types:	(1) SPDT (1) Latched SPDT
Relay rating:	250 VAC, 10A, 1/2 hp.
Relay mode:	Selectable, NO or NC
Relay latch:	ON or OFF
Time delay:	0-60 seconds
Repeater output:	4-20 mA, 12-36 VDC
Fail safety:	Power fail-safe
Temperature range:	F: -40 degrees to 158 degrees C: -40 degrees to 70 degrees
Enclosure mounting:	35 mm DIN (EN 50 022)
Enclosure material:	Polypropylene (U.L. 94 VO)
CE Compliance:	EN 50082-2 immunity EN 55011 emission EN 61010-1 Safety

Application
Remote Automatic Fill or Empty with Alarm Relay Controller LC_2-1001	This AC powered controller is offered in both level and flow switch configurations. The LC42-1001 level switch controller is commonly used for the automatic filling or emptying of a tank between two sensors with a third high or low level alarm sensor. The LC82-1001 flow switch controller is commonly used as a low flow shut off for pump or process protection with two independent sensors. The general purpose controller mounts on a 35 mm DIN rail or panel type installation.
Specifications

LC40 Remote Relay Controller
Supply voltage:	120 VAC (240 VAC), 50 - 60 Hz.
Consumption:	5 Watt
Sensor inputs:	LC42: 1-3 sensors LC41: 1-2 sensors LC40: 1 sensor
Sensor supply:	13.5 VDC @ 27 mA
Relay type:	LC42: (1) SPDT, (1) Latched SPDT LC41: (1) Latched SPDT LC40: (1) SPDT
Relay rating:	250 VAC, 10A, 1/2 hp.
Relay mode:	Selectable, NO or NC
Relay latch:	ON or OFF
Time delay:	0 to 60 seconds
LED indication:	Sensor, relay & power status
Fail safety:	Power fail-safe
Temperature range:	F: -40 degrees to 158 degrees C: -40 degrees to 70 degrees
Enclosure rating:	35 mm DIN (EN 50 022)
Enclosure material:	Polypropylene (U.L. 94 VO)
Certificate number:	LR 79326-3
CE compliance:	EN 50082-2 immunity EN 55011 emission EN 61010-1 safety

Application
Remote Automatic Fill or Empty Relay Controller LC41-1001	This AC powered level switch controller is commonly used for the automatic filling or emptying of a tank between two sensors. A single latched relay performs the automatic control with valves or pumps rated up to 1/2 horsepower. Combine the LC41-1001 controller with Smart Trak, two level sensors and a compact junction box to complete your remote lift station package. The general purpose controller mounts on a 35 mm DIN rail or panel type installation.
Specifications

LC40 Remote Relay Controller
Supply voltage:	120 VAC (240 VAC), 50 - 60 Hz.
Consumption:	5 Watt
Sensor inputs:	LC42: 1-3 sensors LC41: 1-2 sensors LC40: 1 sensor
Sensor supply:	13.5 VDC @ 27 mA
Relay type:	LC42: (1) SPDT, (1) Latched SPDT LC41: (1) Latched SPDT LC40: (1) SPDT
Relay rating:	250 VAC, 10A, 1/2 hp.
Relay mode:	Selectable, NO or NC
Relay latch:	ON or OFF
Time delay:	0 to 60 seconds
LED indication:	Sensor, relay & power status
Fail safety:	Power fail-safe
Temperature range:	F: -40 degrees to 158 degrees C: -40 degrees to 70 degrees
Enclosure rating:	35 mm DIN (EN 50 022)
Enclosure material:	Polypropylene (U.L. 94 VO)
Certificate number:	LR 79326-3
CE compliance:	EN 50082-2 immunity EN 55011 emission EN 61010-1 safety

Application
Remote High or Low Relay Controller LC_0-1001	This AC powered controller is offered in both level and flow switch configurations. The LC40-1001 level switch controller is commonly used as a high or low level safety shut off with a single sensor. The LC80-1001 flow switch controller is commonly used as a low flow shut off for pump or process protection with a single sensor. The general purpose controller mounts on a 35mm DIN rail or panel type installation.
Specifications

LC40 Remote Relay Controller
Supply voltage:	120 VAC (240 VAC), 50 - 60 Hz.
Consumption:	5 Watt
Sensor inputs:	LC42: 1-3 sensors LC41: 1-2 sensors LC40: 1 sensor
Sensor supply:	13.5 VDC @ 27 mA
Relay type:	LC42: (1) SPDT, (1) Latched SPDT LC41: (1) Latched SPDT LC40: (1) SPDT
Relay rating:	250 VAC, 10A, 1/2 hp.
Relay mode:	Selectable, NO or NC
Relay latch:	ON or OFF
Time delay:	0 to 60 seconds
LED indication:	Sensor, relay & power status
Fail safety:	Power fail-safe
Temperature range:	F: -40 degrees to 158 degrees C: -40 degrees to 70 degrees
Enclosure rating:	35 mm DIN (EN 50 022)
Enclosure material:	Polypropylene (U.L. 94 VO)
Certificate number:	LR 79326-3
CE compliance:	EN 50082-2 immunity EN 55011 emission EN 61010-1 safety

Application
Isolation Automatic Fill or Empty with Alarm Relay Controller LC92-1001	For hazardous applications, package the isolation relay controller with our intrinsically safe level switches. The LC92-1001 controller is commonly used for the automatic filling or emptying of a tank between two sensors with a third high or low level alarm sensor. The controller has a built-in intrinsic safety barrier and is approved for use with Class I, Groups A, B, C and D; Class II, Groups E, F and G; and Class III applications. The isolation controller mounts on a 35 mm DIN rail or panel type installation.
Specifications

LC90 Remote Relay Controller
Supply voltage:	120 VAC (240 VAC), 50 - 60 Hz.
Consumption:	5 Watt
Sensor inputs:	LC92: 1-3 sensors LC91: 1-2 sensors LC90: 1 sensor
Sensor supply:	13.5 VDC @ 27 mA
Relay type:	LC92: 1. Fill or Empty with Alarm 2. High and Low Alarm LC91: 1. Fill or Empty 2. High or Low Alarm LC90: 1. High or Low Alarm
Relay type:	LC92: (1) SPDT, (1) Latched SPDT LC91: (1) Latched SPDT LC90: (1) SPDT
Relay rating:	250 VAC, 10A, 1/2 hp.
Relay mode:	Selectable, NO or NC
Relay latch:	ON or OFF
Time delay:	0 to 60 seconds
LED indication:	Sensor, relay & power status
Fail safety:	Power fail-safe
Temperature range:	F: -40 degrees to 158 degrees C: -40 degrees to 70 degrees
Enclosure rating:	35 mm DIN (EN 50 022)
Enclosure material:	Polypropylene (U.L. 94 VO)
CSA approval:	Class I, Groups A,B,C & D; Class II, Groups E, F & G; Class III
CSA entity parameters:	Voc = 17.47 VDC Isc = 0.4597 A Ca = 0.494 µF La = 0.119 mH
Certificate number:	LR 79326-3

Application
Compact DC High or Low Relay Controller with Strobe Alert™ LC09-10_2	This DC powered controller is compatible with our level or flow switches and is commonly used as a high or low level safety shut off with a single sensor. The integral flash alarm brings attention to process alarm conditions. The LC09-1002 controller features a 6 amp relay for direct actuation of valves or pumps rated up to 1/4 horsepower. The general purpose, NEMA 4X controller mounts on any sensor or fitting assembly.
Specifications

LC09 DC Compact Relay Controller
Supply voltage:	14 - 34 VDC
Consumption:	120 mA maximum
Sensor inputs:	(1) Sensor
Sensor supply:	13.5 VDC @ 100 mA
Configuration:	High or low alarm
Relay type:	(1) SPDT
Relay load:	250 VAC, 6A, 1/4 hp.
Relay mode:	Selectable NO or NC
Time delay:	0 - 60 seconds
LED indication:	Sensor, relay & power status
Fail safety:	Power fail-safe
Temperature range:	F: -40 degrees to 158 degrees C: -40 degrees to 70 degrees
Enclosure rating:	NEMA 4X (IP65)
Enclosure material:	Polypropylene, U.L. 94 VO
Enclosure rotation:	300 degree swivel base
Conduit connection:	1/2" NPT (1/2" BSP)
CE compliance:	EN 50082-2 immunity EN 55011 emission EN 61010-1 low voltage
Flash Alarm (Included with LC09-1002)
Flash type:	Xenon tube
Flash frequency:	1 per second
Strobe life:	10M cycles
Supply voltage:	12 - 36 VDC
Consumption:	80 mA
Material:	Polycarbonate
Enclosure rating:	NEMA 4X (IP65)
Color:	Amber

Continuous Level Controller -- $425

Click here for Sensor/Transmitters

* Universal continuous controller with adjustable set points

* Numerical display and bar graph assists in programming

* Excellent choice for use with continuous ultrasonic, continuous RF capacitance and continuous thermal dispersion sensors

* Isolated 4 to 20mA continuous output

* Time delay feature dampens alarm chatter

* Two 12 amp SPDT relays

* Auto fill or empty capability with independent alarm

Sensor Mounted Controllers -- $170

* Mounts directly to sensor or Smart Trak

* Invert switch reverses process logic in response to sensors

* Controls pumps, actuators and valves

* LED displays sensor, power and relay status

* Time delay dampens relay chatter

* NEMA 4X and IP 65 rated enclosure

* Available in AC or DC versions

* 10 Amp relay, SPDT, NO or NC

* Available in Standard and Thermal Dispersion Configurations

Flowline Smart Trak Multi- Switch Fitting

Specifications
Junction Box
Enclosure rating:NEMA 4X/IP65
Enclosure material: Polypropylene
Enclosure rotation: 300g Swivel base
Termination:12 pole socketterminal strip
Temperature range: F: -40 to 158" C: -40 to 70
Conduit connection: 1/2" NPT
Smart Trak Fitting
Track lengths:2, 4, 6, or 8'
Track material:PP, (20% glass)
Mounting thread:2" NPT
Mixing velocity:Up to 1.5 fps
Adjustability: Entire track
Temperature range: F: -40 to 194" C: -40 to 90
Pressure range: Atmospheric
Side Mount Bracket
Bracket material: Polypropylene
Mounting threads: 2" NPT
Installation: Bolt or plastic weld

Application

Automatic Fill
Smart Trak assemblies are the industrial solution for lift station control. Here, two LZ10 tuning fork level switches and one LC11 compact relay controller are installed on Smart Trak for an automatic fill applica- tion. The latching relay actuates the fill valve between the two level switch points.

Automatic Empty with High Level Alarm
Here, three LP10 RF capacitance switches and one LC05 compact junction box are installed on Smart Trak for an automatic empty with high level alarm application. The PLC actuates the transfer pump between the two level switch points with an independent high level alarm.