Fluke Current Accessories

Y8100 Clamp-On AC/DC Current Probe -- $319

* Battery powered Hall-effect clamp-on probe with switch selectable 200A or 20A current range. Produces 2V full range output. For conductors to 0.75" (19 mm). Accuracy: ±2% of range from DC to 200 Hz

Y8101 Clamp-On AC Current Probe -- $79

* Measures AC current from 2A to 150A. Division ratio is 1000 to 1. Clamps over conductors .43" (11 mm) in diameter. Accuracy: ±(2.5% +0.15A) 48 Hz to 440 Hz, ±(3%+0.15A) 440 Hz to 1200 Hz

80i-400 Clamp-On AC Current Probe -- $83

* Measures AC current from 1A to 400A. 1000 to 1 division ratio.
Maximum conductor size: one 1.18" (30 mm) or two 0.98" (25 mm).
Accuracy: ±(3%+0.4A) from 48 Hz to 1000 Hz

80i-410 Clamp-On AC/DC Current Probe -- $179

* Battery-powered Hall-effect clamp-on probe measures AC or DC current from 5A to 400A. Maximum conductor size: one 1.18" (30 mm) or two 0.98" (25 mm). Output is 1 mV per Amp DC or AC. Accuracy : ±(5%+2.5A), 5A to 400A, DC to 62 Hz. Useable to 400 Hz

80i-600 Clamp-On AC Current Probe -- $119

* Measures ACcurrent from 1A to 600A. Division ratio is 1000 to 1. Maximum conductor size 2" (50 mm) in diameter. Accuracy: ±2%, 50 Hz to 1 KHz, ±3% (typical) 30 Hz to 50 Hz or 1 KHz to 10 KHz

80J-10 Current Shunt -- $56

* Allows measurement of AC or DC current with precision DMM (such as an 8050A or 8060A). Will pass 10A continuously. Accuracy: +/-0.25% from DC to 10 KHz

80i-1010 Clamp-On AC/DC Current Probe -- $297

* Battery-powered Hall-effect clamp-on probe measures AC current to 700A, DC current to 1000A. Thumbwheel ZERO control compensates for residual core magnetism, improving the accuracy of DC measurements down to 1A. Output is 1 mV per Amp DC or AC. Maximum conductor size: one 1.18" (30 mm) or two 0.98" (25 mm). Accuracy: ±(2%+1A), 1A to 100A, DC to 62 Hz. Useable to 440 Hz

85RF High Frequency Probe -- $99

* Converts 10 Mohm DMM into high frequency AC voltmeter. AC to DC conversion ratio is 1:1 over a range of 0.25 to 30V RMS. The probes DC output is calibrated to the RMS value of a sinewave input. Frequency range: 100 KHz to 500 MHz. Accuracy: ±0.5 dB above 0.5V

83RF High Frequency Probe -- $79

* Similar to 85RF, with frequency range from 100 KHz to 100 MHz. Accuracy: ±1 dB above 1V

80K-40 High Voltage Probe -- $106

* Measures up to 40 kV DC or 28 kV RMS AC. Division ratio is 1000 to 1. Has 1000 MW input resistance. DC accuracy: 20 kV to 35 kV, ±1% at 20°C to 30°C; add 1% at 10°C to <20°C and > 30°C to 45°C. AC accuracy: 60 Hz, 5%

80K-6 High Voltage Probe -- $57

* Division ratio is 1000 to 1. Extends measurement capabilities to 6000V DC or peak AC. Accuracy: ±1.0% DC; ±1% to 500 Hz AC, ±2% 500 Hz to 1 KHz AC

80i-kW Current/Power Probe -- $549

* Battery-powered clamp-on multimeter accessory that measures DC current, AC current and AC power without breaking the circuit. The 80i-kW uses special safety-shrouded voltage test leads with safety alligator clips to provide a voltage input that, in conjunction with the current input, gives a reading in kilowatts on the multimeter