Hardy Controllers

HI 2151/20WC General Purpose Programmable Weight Controller -- $1,325

* WaverSaver® ignores plant and process vibration

* Secure memory module backs up critical calibration data

* Net, gross, peak, totalized and rate-of-change modes of weighing

* Supports discrete and block transfers

* C2(TM) Second Generation Calibration eliminates the need for test weights

* Provides power to strain gauge load cells, receives and digitizes the weight signal, displays weight locally and transmits data to the programmable controller via the remote I/O network. Setpoint relays can control filling, dispensing and batch processes as well as monitor rates of flow

* Load cell power for eight 350 ohm load cells

* 1,000,000 counts of display resolution

* Weight controller updates at a rate of 20 times per second

* Represents one quarter rack of remote I/O

* UL, CSA and NTEP approvals

* Panel, wall and remote display mount configurations

* Six digit, seven segment LED 120/240 VAC, 50/60Hz

* NEMA 4 (waterproof) front panel

HI 2160RC Stand-Alone Rate Controller -- $5,000-$5,150

* WaverSaver ignores plant and process vibration

* Automatic closed-loop control of feed rates

* Automatic refill of feeding devices

* Three user-defined security levels

* Automatic alarming of rate and weight exceptions

* 120/240 VAC 50 or 60Hz

* UL and CSA approvals

* Rate exception control for reliable feed rates during disturbances

* Secure memory module backup of critical calibration data

* For use with a variety of dispensing devices such as vibratory, auger, belt and pump-based feeders

* Powers, receives and digitizes load cell signals with 1,000,000 counts of resolution, calculates and displays actual rate of flow, adjusts the control output, monitors feed rates for alarm or shutdown conditions, automatically controls the refill of the feeder, monitors refill for shutdown conditions and prints batch reports

* Load cell power for four 350 ohm load cells

* Four line, twenty column backlit display

* Represents one quarter rack of remote I/O

* NEMA 4 (Waterproof) front panel

Load Cells 

* Hardy provides hermetically sealed or stainless steel load cells for hostile and regulated environments; load cells and intrinsic barriers that meet strict Factory Mutual requirements; and rugged load cells for high vibration and seismic conditions

* Mounting hardware and accessories incorporate everything necessary to complete a load cell system, including cable, junction boxes, and "self-checking" mounting hardware for continual alignment of force

* Platform scales are available in three styles: lightweight benchtop platforms for pit mounting or vessel mounting; and floor scales with ramps to receive rolling carts

* Support C2, Second Generation Calibration

HI 264ODC Bulk Weighing System -- from $4,900

* An automatic bulk weighing system designed to control incoming or, outgoing material in your shipping and receiving scale operations

* Stores individual draft requirements, tolerances and weight compensation offsets for up to 25 separate materials

* Analyzes weight data generated by strain gauge load cells to accurately measure the flow of bulk materials, while automatic weight compensation continuously adjusts the final weight cutoff point to correct for the "in-flight weight" of an ingredient. Any ingredient falling short of the pre-programmed tolerance level is brought into tolerance by a programmable, automatic jog sequence

* Compatible with any operation that requires fast and efficient weighing of bulk materials