Insertion
Flow Meter (IF200)
Measure
and Totalize Flows in Full Pipes
 |
Scroll to:
Product Description Specifications Prices
|
The IF200 Insertion Flow Meter is a reliable and accurate instrument for monitoring instantaneous and total flows in full pipes of 2" to 30" diameters. The debris shedding turbo prop design makes the IF200 ideal for irrigation water, well water, process water or other non-clean applications. The battery powered computer displays current flow rate and total flow in any engineering units and for all pipe diameters.
Installation is simple and the Insertion Flow Meter can easily be moved from site to site.
Flow ComputerThe Flow Computer is easily calibrated for all pipe diameters and any flow units including gpm, cfs, m3/sec and acre feet. Units and diameters can be easily changed in the field. The Flow Computer runs for at least two years on its internal batteries.The engineering units for
instantaneous and total flows and scaling for pipe diameter are entered
in with a simple two-button system using the lookup table in the owner's
manual. Setup takes less than 5 minutes.
|
 |
Turbo-PropThe Turbo-Prop is a positive displacement sensor which is highly accurate over a wide range of flow rates. The propeller rotates freely on its brass bearting shaft. The electronic pickup sensor means that there are no mechanical gear systems or cables to cause drag or failure.The IF200 is much more accurate
than paddle wheel type sensors which are not linear at low and high water
velocities.
Debris-Shedding DesignThe unique debris-shedding bar guides debris away from the Turbo-Prop. In addition, the Turbo-Prop trails the shedding bar so debris that comes off the shedding bar slips past the Turbo-Prop. |
 |
Accuracy: 2% of flow
Linearity: 0.5%
Units: gpm, cfs, m3/sec, acre feet, and any engineering units.
Pipe Diameter: Any diameter from 2" to 30"
Compression Adapter: 2" male thread (Note: pipe must be provided with a 2" female thread.)
Range: 0.1 to 25 feet/sec.
Batteries:vvInternal 1.3 3 VDC Lithium; 5 yr.
Materials: PVC, Epoxy, SS440 Teflon Bushing
Weight: 3 lbs. (Shipping Weight: 5 lbs.)
Size: 2" diameter; Length: 8.25" Prices
IF200 Insertion Flow Meter............................$595
(Please specify pipe diameter range upon ordering.)
