Call or email us for FACTORY DIRECT PRICING, Delivery, Literature or Application Support. Sales@omnicontrols.com

Controllers

1410 Adaptive Tune 1/16 DIN Controller -- from $210

* Adaptive & auto tune

* IP 65 front panel shield

* Front panel configurability

* One output standard, two optional plus communications available

* Outputs plug-in for easy setup/change

* Universal inputs (RTD, T/C & analog); front panel selectable

* Full PID Heat/Cool capability

* Universal power supply

* Loop break alarm

* Analog retransmission (recorder output)

* Inputs: Thermocouple Types: J, K, R, S, T & B; RTD: PT 100 (3850 ppm); Current: 4-20mA, 0-20mA; Voltage: 0-50mV, 10-50mV, 0-5V, 1-5V, 0-10V

* Outputs: EMR: SPDT 2A resistive @ 120/240VAC; DC Trigger: 4.3VAC into 250ohm min.; Analog: 10 Bit resolution, 0-20mA, 4-20mA, 0-5V, 0-10V selectable

* Accuracy: ±0.25% of span ±1LSD

* Supply Voltage: 90-264VAC @ 50/60Hz

* 3-year warranty

2000 Series Microprocessor-Based Single and Two Loop PID Controllers

* Vacuum-fluorescent display prompts for recalibration, tuning, programming and operation

* Color-coded alarm, output and mode words built into the display permit instant status review at all times

* Input Selection: Any thermocouple listed below with internal linearization (for other thermocouples contact Inotek); RTD Sensor -- 100 Ohm, .00385 PPM, Platinum. Select 1° or 0.1°; Any DC voltage including process voltage signals; Any DC current including process current signals

* Control Selection: ON/OFF control with selectable deadband and solid-state relay output(s); 3 Mode Time proportional control with fully selectable cycle time and PID parameters and solid-state relay output(s); 3 Mode Analog control output(s) with fully selectable PID parameters

* Internal lithium battery protects memory during power OFF and power loss conditions

* Flame retardant UL rated ABS plastic case fits 1/4 DIN cutout with mounting bracket. Polycarbonate flame retardant bezel. Screw terminals at rear. Slide-out assembly with plug-in circuit boards

* Accuracy: ±0.2% of T/C range shown below

* Thermocouples: (maximum ranges shown)

2002 Single-Loop PµP Controllers -- from $510

* Front keypad programming; No internal switches, pots or jumpers to set or adjust

* Self-diagnostics with displayed messages

* Keypad security for tuning and calibration

* Internal linearization of T/C and RTD inputs

* Internal scaling of process signal inputs

* Independent digital PID tuning

* 1/4 DIN cutout

2010/2011 Full Feature Ramp & Soak Controllers -- from $895

* Start/stop key function

* Auto/manual key function

* Ramp and soak

* Multi setpoint

* Assured soak

* Alphanumeric scrolling display prompts and informs the user during all phases of operation including tuning and recalibration

* Inputs: types J, K, R, S, T, N, E, B, Platinel II, Ni/Ni 18% Moly, W5 Re/W26 Re, W3 Re/W25 Re, and W/W26 Re thermocouples; 1°RTD 100ohm PT, .1°RTD 100‡ PT, .5VDC, 4-20mADC

2012/2013 Profile Controllers -- from $950

* Assured soak

* Repeat cycle

* On-line changes

* Alarm/event relays

* 8 key profile control and front panel key functions

* Model 2012 is a single-loop profile controller with up to two independently tuned control outputs and two alarm/event relay outputs

* Model 2013 is a two-loop profile controller. Each loop has its own input and output. There is one alarm/event relay that can be programmed for either loop. The stored profiles are available to both loops.

* Inputs: types J, K, R, S, T, N, E, B, Platinel II, Ni/Ni 18% Moly, W5 Re/W26 Re, W3 Re/W25 Re, and W/W26 Re thermocouples; 1°RTD 100ohm PT, .1°RTD 100‡ PT, 0-5VDC, 0-10VDC, 0-100mVDC, 4-20mADC or no input

2014/2015 Position Controllers -- from $745

* Position control w/slidewire feedback

* Manual control of outputs

* Profile control (model 2015)

* Self-diagnostics

* Provide accurate and reliable temperature and process control in systems with bi-directional AC electric motor driven operators.

* Special program for position control incorporating slidewire feedback (option) and front panel key functions unique to position control. One LFE position controller replaces both the controller and position logic device previously require

* Inputs: types J, K, R, S, T, N, E, B, Platinel II, Ni/Ni 18% Moly, W5 Re/W26 Re, W3 Re/W25 Re, and W/W26 Re thermocouples; 1°RTD 100ohm PT, .1°RTD 100‡ PT, .5VDC, 4-20mADC

2005 Microprocessor-Based Multi-Zone Zone Controllers -- from $560

* Remote setpoint

* Assured soak

* Common control

* Progressive control

* Available with Stop/Start or Auto/Manual key functions and can include PID SELF TUNE capability

* Accept a 0-5 VDC or other compatible analog remote setpoint signal from an LFE Model 2017 Setpoint Programmer or similar device

* Special electrical isolation is included to minimize the ground loop potential from the remote setpoint source. More than 30 zone controllers can operate from the same remote setpoint

* Inputs: types J, K, R, S, T, N, E, B, Platinel II, Ni/Ni 18% Moly, W5 Re/W26 Re, W3 Re/W25 Re, and W/W26 Re thermocouples; 1°RTD 100ohm PT, .1°RTD 100‡ PT, .5VDC, 4-20mADC

2017 Microprocessor-Based Multi-Zone Setpoint Programmer -- from $950

* Profile control

* Ramp by time or rate

* Alarm/event relays

* 16 menus with 255 total segments

* 4 alarm/event relay outputs are included that are programmable at the end of each segment

* Profile programming through the front keypad

* Color-coded alphanumeric display shows key words to prompt and inform the operator during all programming and operation

Model 3000 PµP II Advanced Controller

* Can manage sophisticated control strategies requiring cascade, dual-loop, variable gain and logic control

* Vacuum fluorescent display

* 1/4 DIN metal case

* Direct numeric entry

* Self tune

* Self diagnostics

* Single & dual input

* 3 non-isolated logic inputs

* Data logging capabilities

* History file

* Math & linearization

* Profile control

* Digital communications

* 13 T/C, 12 RTD, analog & thermister input selection