+GF+ SIGNET Piping Systems

Signet Produsts Lists

+GF+ SIGNET 9010 Flow Controller

9010 Flow ControllerDescription

The +GF+ SIGNET 9010 Flow Controller is engineered for liquid flow measurement and control in process pipes. The modular design offers the advantage of expanding a system by plugging a relay card into the main unit, or up to two analog output cards. All functions are accessed and controlled from the front panel which is ideal for mounting into instrumentation panels.

Features

  • DC and/or AC powered
  • Pump pulsing capability
  • Programmable security access
  • Modular input/output options
  • Menu driven operation
  • 8-digit totalizer

Applications

  • Proportional addition mixing/dosing
  • Flow rate alarm
  • Pump sequencing
  • Effluent totalization

Compatibility

  • All +GF+ SIGNET flow sensors

Technical Data

Operating Range: Frequency: 1 to 10 kHz
K-Factor range: 0.0001 to 19999
Power Requirements: 17 to 30 VDC @ 0.5A max. and/or 90 to 132 VAC or 180 to 264 VAC, 50-60 Hz
LCD Display: 4-1/2 digit alphanumeric (upper)
8 digit alphanumeric (lower); 4 relay status annunciators)
Current Output: 4 to 20 mA, iso or non-iso, internally pwrd. (2 of 3 card slots avail.)
Loop impedance: 425 ohm max.
Accuracy: +/-0.5% of full scale
Update Rate: 2.5 sec.
Voltage Output: 0 to 5 or 0 to 10 VDC, isolated or non-isolated
Min. load resistance: 1 k ohm
Output isolation: 500 VDC to earth ground (iso version only)
Alarm Contacts: Two SPDT relays: 5A @ 30 VDC or 250 VAC max. (1 of 3 card slots available)
Hi/Lo/Pulse programmable with adj. hysteresis or pulse programmable
Operating Cond.: Operating temperature: 32 to 130 degrees F
Relative humidity: 0 to 95%, non-condensing
Accuracy: 0.05% of reading
Materials:  Enclosure: ABS Plastic, NEMA 4X/IP65
Panel and case gasket: Neoprene

Ordering Information


Part No. 
Description
3-9010.111 Flow Controller, 90 to 132 VAC, frequency input card
3.9010.121 Flow Controller, 180 to 264 VAC, frequency input card
3-9010.110 Flow Controller, 90 to 132 VAC, no input card
3-9010.120 Flow Controller, 180 to 264 VAC, no input card
Accessories
3-9010.400-1 Frequency Input Card, non-isolated
3-9010.400-3 0 or 4 to 20 mA Input Card, isolated
3-9010.400-4 0 to 5 or 10 VDC Input Card, isolated
3-9000.450-1 0/4 to 20 mA non-iso output card
3-9000.450-2 0 to 5 VDC non-iso output card
3-9000.450-3 0 to 10 VDC non-iso output card
3-9000.460-1 0/4 to 20 mA iso output card
3-9000.460-2 0 to 5 VDC iso output card
3-9000.460-3 0 to 10 VDC iso output card
3-9000.440-1 2 relay card
3-5000.395 Splashproof Back Cover Kit
3-5000.598 Mounting Bracket
3-5000.399 Retrofit Adapter Kit
3-9000.392 Liquid Tight Connector Kit

+GF+ SIGNET 9030 pH Controller

9030 pH ControllerDescription

Using the plug-in cards, the +GF+ SIGNET 9030 pH Controller can expand from on-off to proportional control, plus a variety of outputs for recording or data logging. Combine the 9030 with +GF+ SIGNET electrodes and pre-amplifier for a simple solution for any pH application.

Features

  • On-off or dual proportional control
  • Up to four relays
  • Up to two analog outputs

Applications

  • Plating baths
  • Fume scrubbers
  • Effluent pretreatment
  • Water and waste treatment systems
  • Groundwater remediation
  • Acid/base neutralization
  • Resource reclamation

Compatibility

  • 2720 pH/ORP Pre-amp/Sensor System

Technical Data

Operating Range: pH: 0 to 14, input isolated
Temperature: 4 to 230 degrees F (Auto temp. comp. from 32 to 21 degrees F)
Power Requirements: 17 to 30 VDC @ 0.5A max. and/or 90 to 132 VAC or 180 to 264 VAC, 50-60 Hz
LCD Display: 4-1/2 digit alphanumeric (upper)
8 digit alphanumeric (lower); 4 relay status annunciators
Current Output: 4 to 20 mA, iso or non-iso, internally pwrd. (2 of 3 card slots avail.)
Loop impedance: 425 ohm max.
Accuracy: +/-0.5% of full scale
Voltage Output: 0 to 5 or 0 to 10 VDC, isolated or non-isolated
Min. load resistance: 1 k ohm
Output isolation: 500 VDC to earth ground (iso version only)
Alarm Contacts: Two SPDT relays: 5A @ 30 VDC or 250 VAC max. (2 of 3 card slots available)
Hi/Lo programmable with adjustable hysteresis
Two SPST relays: 5A @ 30 VDC or 250 VAC max.
Hi/Lo/Pulse programmable with adj. hysteresis or pulse rate
Operating Cond.: Operating temperature: 32 to 130°F
Relative humidity: 0 to 95%, non-condensing
Accuracy: +/-0.02 pH
Materials:  Enclosure: ABS Plastic, NEMA 4X/IP65
Panel and case gasket: Neoprene

Ordering Information


Part No. 
Description
3-9030.111 pH Controller, 90 to 132 VAC
3.9030.121 pH Controller, 180 to 264 VAC
Accessories
3-9000.450-1 0/4 to 20 mA non-iso output card
3-9000.450-2 0 to 5 VDC non-iso output card
3-9000.450-3 0 to 10 VDC non-iso output card
3-9000.460-1 0/4 to 20 mA iso output card
3-9000.460-2 0 to 5 VDC iso output card
3-9000.460-3 0 to 10 VDC iso output card
3-9000.440-1 2 relay card
3-9000.400-1 Dual Proportional relay card
3-5000.395 Splashproof Back Cover Kit
3-5000.598 Mounting Bracket
3-5000.399 Retrofit Adapter Kit
3-9000.392 Liquid Tight Connector Kit

+GF+ SIGNET 9040 ORP Controller


Description

The +GF+ SIGNET 9040 ORP Controller provides reliable control of oxidizing and reducing reactions. Multiple output options allow for alarming, data logging, or simple process recording. Security features prevent unwanted tampering..

Features

  • On-off or dual proportional control
  • Up to four relays
  • Up to two analog outputs

Applications

  • Effluent pretreatment
  • Water and waste treatment systems
  • Groundwater remediation
  • Resource reclamation
  • Cyanide destruction
  • Metals recovery and removal
  • Water sanitation systems
  • Disinfection

Compatibility

  • 2720 pH/ORP Pre-amp/Sensor System

Technical Data

Operating Range: ORP: +/-1000 mV's
Power Requirements: 17 to 30 VDC @ 0.5A max. and/or 90 to 132 VAC or 180 to 264 VAC, 50-60 Hz
LCD Display: 4-1/2 digit alphanumeric (upper)
8 digit alphanumeric (lower); 4 relay status annunciators
Current Output: 4 to 20 mA, isolated or non-isolated, internally powered (2 of 3 card slots avail.)
Loop impedance: 425 ohm max.
Accuracy: +/-0.5% of full scale
Voltage Output: 0 to 5 or 0 to 10 VDC, isolated or non-isolated
Min. load resistance: 1 k ohm
Output isolation: 500 VDC to earth ground (isolated version only)
Alarm Contacts: Two SPDT relays: 5A @ 30 VDC or 250 VAC max. (2 of 3 card slots available)
Hi/Lo programmable with adjustable hysteresis
Two SPST relays: 5A @ 30 VDC or 250 VAC max.
Hi/Lo/Pulse programmable with adj. hysteresis or pulse rate
Operating Cond.: Operating temperature: 32 to 130 degrees F
Relative humidity: 0 to 95%, non-condensing
Accuracy: ORP: +/-0.1% of full scale
Materials:  Enclosure: ABS Plastic, NEMA 4X/IP65
Panel and case gasket: Neoprene

Ordering Information


Part No. 
Description
3-9040.111 ORP Controller, 90 to 132 VAC
3.9040.121 ORP Controller, 180 to 264 VAC
Accessories
3-9000.450-1 0/4 to 20 mA non-iso output card
3-9000.450-2 0 to 5 VDC non-iso output card
3-9000.450-3 0 to 10 VDC non-iso output card
3-9000.460-1 0/4 to 20 mA iso output card
3-9000.460-2 0 to 5 VDC iso output card
3-9000.460-3 0 to 10 VDC iso output card
3-9000.440-1 2 relay card
3-9000.400-1 Dual Proportional relay card
3-5000.395 Splashproof Back Cover Kit
3-5000.598 Mounting Bracket
3-5000.399 Retrofit Adapter Kit
3-9000.392 Liquid Tight Connector Kit


+GF+ SIGNET 9050CR Conductivity/Resistivity Controller

+GF+ SIGNET 9050CR

Description

The +GF+ SIGNET 9050CR Conductivity Controller offers modularity easily adaptable to any conductivity or resistivity application. Easy single-point "wet-cal" allows for instant accurate calibration. Programming options include display units and temperature compensation. Outputs can be assigned to any channel or display parameters.

Features

  • Two-channel capability
  • µS, mS, K, M, ppm, and percent rejection
  • Up to four relays can be installed
  • DC and/or AC powered

Applications

  • Reverse osmosis
  • Demineralization
  • Boiler protection
  • Water and waste treatment systems
  • Groundwater remediation
  • Cooling tower blowdown
  • Resource reclamation

Compatibility

  • 2800 Series Conductivity Sensors

Technical Data

Operating Range: Conductance: 0.055 to 400,000 µS
Resistance: 10 k to 18.3 M (0.055 to 100 µS) must be performed in solution temperatures from 20 to 100 degrees C
Temperature: PT-1000, 32 to 212 degrees F
(Temperature display and alarming from: 14 to 302°F)
Power Requirements: 17 to 30 VDC @ 0.5A max. and/or 90 to 132 VAC or 180 to 264 VAC, 50-60 Hz
LCD Display: 4-1/2 digit alphanumeric (upper)
8 digit alphanumeric (lower); 4 relay status annunciators
Current Output: 4 to 20 mA, isolated or non-isolated, internally powered (2 of 3 card slots available)
Loop impedance: 425 ohm max.
Accuracy: +/-0.5% of full scale
Voltage Output: 0 to 5 or 0 to 10 VDC, isolated or non-isolated
Min. load resistance: 1 k ohm
Output isolation: 500 VDC to earth ground (isolated only)
Alarm Contacts: Two SPDT relays: 5A @ 30 VDC or 250 VAC max. (2 of 3 card slots available)
Hi/Lo/Pulse programmable with adj. hysteresis or pulse rate
Two SPST relays: 5A @ 30 VDC or 250 VAC max.
Hi/Lo/Pulse programmable with adj. hysteresis or pulse rate
Temperature compensation: Programmable 0 to 10% per degree C
TDS Conversion Factor: Prog. 0.00 to 3.00µS/ppm (default 2.00)
Operating Cond.: Operating temperature: 32 to 130 degrees F
Relative humidity: 0 to 95%, non-condensing
Accuracy: +/-2% of reading
Materials:  Enclosure: ABS Plastic, NEMA 4X/IP65
Panel and case gasket: Neoprene
Immunity: IEC 801-2 level 4, IEC 801-3 level 1

Ordering Information


Part No. 
Description
3-9050CR.1 Cond./Resistivity Controller 110VAC
3.9040.121 Cond./Resistivity Controller 220 VAC
Accessories
3-9000.450-1 0/4 to 20 mA non-iso output card
3-9000.450-2 0 to 5 VDC non-iso output card
3-9000.450-3 0 to 10 VDC non-iso output card
3-9000.460-1 0/4 to 20 mA iso output card
3-9000.460-2 0 to 5 VDC iso output card
3-9000.460-3 0 to 10 VDC iso output card
3-9000.440-1 2 relay card
3-9000.400-1 Dual Proportional relay card
3-5000.395 Splashproof Back Cover Kit
3-5000.598 Mounting Bracket
3-5000.399 Retrofit Adapter Kit
3-9000.392 Liquid Tight Connector Kit

Phone: 813-971-5001
Fax : 813-971-5117

Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Toll Free
1-800-783-6664

email sales@omnicontrols.com
Sales@Omnicontrols.com

We guarantee a 24 hour response on all inquiries made via email.
For quicker response please call Omni Controls
at any of the above numbers

 


Please Note: All prices subject to change without notice
copyright©omnicontrols.com - All Rights Reserved.
Terms and Conditions for Omni Controls Inc - online. Legal Disclaimer
Supplementary Information and Cover Art Copyright omnicontrols.com. All rights reserved.

copyright © omnicontrols 2005
Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Email: sales@omnicontrols.com

Phone: 800-783-6664
Fax: 813-971-5117