Signet Magmeter
+GF+ SIGNET 2560
Flowmag
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
Description
The +GF+ SIGNET 2560 Flowmag monitors the flow velocity of conductive liquids and provides necessary flow behavior data in water and wastewater applications. The microprocessor controlled electronics convert the measured signal into an analog 4 to 20 mA current output signal displaying stable 4 mA output with empty pipe conditions. The relay and current output ensures high operational integrity. The relay will respond to either flow direction, and the current output is always positive.
Features
- Easy setup
Pipe size from 0.5 to 4 in.
Scalable flow range
Adjustable limit contact with min./max. fail-safe setting
Flow monitoring with selectable limit values
Error messages signaled through outputs
Stable 4 mA output with empty pipe
Integrated test functions
Applications
- Pump control & supervision
Cooling water supervision
Water distribution
Industrial effluent
Fluid blending systems
Compatibility
- 5091 Current Monitor
- 9010 Flow Controller
Technical Data
| Output Signal: | 4 to 20 mA non-isolated, internally powered |
| Operating Range: | 0.1 to 7 m/s, 0.3 to 20 ft/s |
| Full Scale Range: | 1 to 5 m/s, 3 to 15 ft/s recommended (minimum liquid conductivity = 20µS/cm) |
| Pressure/Temperature: | 180 psi @ 68 degres F, 25 psi @ 185 degrees F |
| Power Requirements: | 20 to 30 VDC |
| Alarm Contacts: | One SPDT relay: 0.5A @ 75VDC or 0.4A @ 60 VAC max. |
| Pipe Size Range: | 0.5 to 4 in. |
| Repeatability: | +/-2% of reading at measuring electrode with local calibration at flow velocities >1m/s |
| Materials: | Sensor tip: PVDF Sensor electrodes: 316L SS Sensor body: 316L SS Fitting adapter: 316L SS Adapter seal: NBR Sensor cap: glass-filled polypropylene O-rings: Viton® Housing: Aluminium, epoxy powder coated IP66/NEMA 4X Weight: 3.5 lbs. |
| Quality Standards: | CE |
Installation
Additional support may be required for small pipe diameters. Observe pressure/temperature specifications of all system components.
Dimensions
Ordering Information
Part No. |
Description |
| 3-2560-1 | Flowmag with 0.5 in. NPT Cable Gland Ports |
| 3-2560-2 | Flowmag with PG16 Cable Gland Ports |
+GF+ SIGNET 2550 Insertion Magmeter
Description
The +GF+ SIGNET 2550 Insertion Magmeter combines the installation and maintenance ease of insertion sensors with the features of a full-line magmeter to provide a low-cost alternative for the most demanding flow applications. The 2550 is easy to handle, and simple to remove from line for quick maintenance without major operational shutdowns.
Features
- Easy install and removal insertion
technology
Simple pushbutton calibration
Microprocessor-based noise rejection
Isolated 4 to 20 mA and frequency output
Fluid diagnostics
Adjustable to pipe sizes 2 to 12 in.
Standard pipe connections
Applications
- Well water flow monitoring
Industrial effluent
Intake water
River and lake water flow monitoring
Metal recovery and landfill leachate
Compatibility
- 5091 Current Monitor
- 5500 Flow Monitor
- 5600 Batch Controller
- 8512 Flow Transmitter
- 8540 Pump Pulser
- 9010 Flow Controller
Technical Data
| Output Signal: | Isolated current
output: 0/4 - 20 mA into 600 Ohm maximum load internally powered Isolated frequency output: 500 Hz = 20 ft/s, 50% duty cycle, open collector |
| Operating Range: | 0.3 to 20 ft/s (minimum liquid conductivity = 5 µS) |
| Pressure/Temperature: | 250 psi max. Ambient temperature: -4 to 176 degrees F Liquid temperature: 32 to 212 degrees F |
| Power Requirements: | 24 VDC +/-10%, 600 mA max. |
| Pipe Size Range: | 2 to 12 in. |
| Repeatability: | +/-2% of reading or +/-0.05 ft/s, whichever is greater |
| Materials: | Sensor body, retaining ring,
threaded nut: 316 SS Sensor tip: PFA Teflon® Electrodes: 316 SS O-rings: Viton® Housing: Die cast aluminum |
Installation
| The 2550 installs into
standard fittings with 2 in. NPT or ISO 7/1-R2 threads. Select a location where the flow
profile is fully developed and not affected by any disturbances. Mount the 2550 at any convenient angle. Full pipes are required. |
 |
Dimensions
Ordering Information
Part No. |
Description |
| 3-2550.100-110 | Insertion Magmeter with 2 in. NPT Fitting |
| 3-2550.100-110T | Insertion Magmeter with 2 in. NPT Fitting and Installation Tool |
| 3-2550.100-111 | Insertion Magmeter with 2 in. ISO Fitting |
| 3-2550.100-111T | Insertion Magmeter with 2 in. ISO Fitting and Installation Tool |
Accessories |
|
| 3-2550.355 | Magmeter Installation Tool |
Complete Your Flow System
The 2550 is ready to provide data requirements for most flow control applications, from simple recording to total PLC system input. The frequency output signal also allows expansion of the flow control capability by connecting to a wide selection of flow instruments available from +GF+ SIGNET.
| LF430 Series TOSHIBA Magnetic Flowmeters (Magmeters) | More_Info |
 |
These
cost-effective flowmeters combine superior noise immunity with high
purity ceramic detection unit liners, allowing precise measurement in a
wide range of applications. |
