Topaz S3 (0.5, 1.0, 2.0 kVA )

* See Features & Benifits as well as Spec Sheet

TOPAZ S3 Inverters
0.5, 1.0, 2.0 kVA

The New Topaz S3 Inverter has set industry standards for design, performance and customer satisfaction. It is the smallest, most efficient draw out type inverter, 48 Volts DC input with wide range AC output voltages and frequency capability, designed for telecommunication market. The Topaz S3 is fully tested in strict compliance with the requirements of UL, cU, TUV, and CE.

Applications
	Telecommunications
	Data Processing
	Building Management System
	Railroad System Switching
	Microwave Communications
	Alternative Energy Systems
	Fibre Optic Repeaters
Features Benefits Isolated Boost Converter / Dual PWM inverter technology Provides excellent isolation between AC to DC,  higher efficiency and also contributes to Smaller size and less weight Hot Swap capability          Very low MTTR (less than 5 min. to replace the module without shutting down the load) increased reliability. Cascade redundant configuration adds to the reliability Very high MTBF (power to the load) increased availability. High efficiency 97% efficiency in off-line mode; 85% typical in on-line mode High switching frequency Eliminates the audible noise and transient response Advanced microprocessor controller and status monitoring Visual display, warning indicators 125% rated unit; 120% for 2kVA Enables continuous loading of up to 1.25 kVA Field selectable AC voltage: 100, 110, 115, 120, 200, 220, 230, 240 Field selectable frequencies: 50 / 60 Hz Selectable on-line / off-line (Bypass) mode with static switch and overvoltage protection on both mode of operations. Suitable for both 50 0r 60 Hz market The unit can be used as an off-line unit to save energy and the load is still protected from overvoltage events. Maintenance bypass switch which enables the module to be Hot Swappable Easy draw-out module without interrupting the critical load. Hot Swap rack for low MTTR
TOPAZ S3 Specifications
Characteristic TOPAZ S3 Technology Dual PWM Input voltage -42 to -57 VDC Output voltage 100/110/115/120/200/220/230/240 VAC Output waveform Sinewave Frequency 50/60Hz  Frequency (stability) +/-.02 maximum  Technologies Dual PWM / On-line/Offline Efficiency 85% typical (on-line) Output power factor 0.6 to 0.84 lagging or leading Total harmonic distortion 2% maximum for linear load <3% for non-linear load, from 0 to 100% load Transfer time Less than 2 ms Overload capacity Up to 125% VA/W continuous (120% for 2 kVA) - 125% to 150% - 1800 cycles - 150% to 220% - 24 cycles - 220% to 300% - 4 cycles Feedback noise <30 dBrnc Voltage regulation +/- 1% Metering LED's w/ LCD display Audible noise < 55 dBA @ 4' typical Warranty 1 year

Power-Invert S4 (3.5 - 21 kVA Scalable N+1 Inverter)

MGE's Power-Invert S4 N+1 scalable DC to AC inverter is the latest addition to the Power-Invert line recognized as the industry standard for critical AC power by many of the world's leading telecom companies. SCALABILITY: Scalable 3.5 kVA inverter power modules can be stacked in a N+1 redundant configuration (paralleled for redundancy or capacity) up to 21 kVA. OPTIMUM AVAILABILITY: All modules are packaged into a "hot swap" receiver cabinet with an integrated maintenance bypass allowing rapid and safe exchange of any component without interruption to the critical load.

NEBS STANDARDS: The S4 is one of the only inverters designed to meet NEBS standards assuring compatibility with all devices in a telecom environment.

RELIABILITY: Redundant microcontrollers feed control signals to each inverter along a dedicated and isolated control line resulting in an MTBF greater than 99 years.

TELECOM GRADE FILTERING: High-end power filters limit ripple current on the DC bus to a negligible 32 dB, preventing micro-cycling of the battery. EMI filters regulate conducted and radiated interference that could potentially create noise disturbances. This high grade filtering is unique to the S4 making it the best choice for telecom environments.

Advanced Features: Constructed to NEBS /Telecom industry standards True Modular Scalability: 3.5 kVA-21 kVA (3.5 kVA modules) - add modules as your system grows Parallel for N+1 redundancy or capacity Safe hot swap technology Unparalleled reliability: no single points of failure Full front accessibility Ultra low profile: 21 kVA in 24 U with static switch Clean DC input < 30 dBrnc Precision output voltage regulation: < 2% THD Integrated static bypass for added reliability LCD status display module SNMP / Web based monitoring (optional) Universal voltage and frequencies (user selectable) Customers supported by MGE's Trained and Certified Field Engineer force International agency certifications (UL, CE, TUV)

The S4 is available with the following optional accessories, all of which can be factory installed on an open frame relay rack, providing a ready to install inverter system.

Maintenance Bypass:

AC Distribution Panel: The AC distribution panel accommodates 20 single pole breakers and is available in 120 and 240 VAC versions. 10 x two pole breakers can be used if distribution alarm monitoring is required.

Web Based Monitoring: The Falcon monitoring system (1.75" high rack mounted) provides inverter, maintenance bypass and AC distribution status and alarms over a closed network or via the Internet serving up web pages that can be viewed with a standard browser or via SNMP or dial up access. Accessories include environmental monitoring modules and auxiliary inputs to monitor other devices such as leak detection systems, room security or any other dry contact status points.

Open Frame Relay Rack: All components can be mounted on an industry standard open frame relay rack with the entire inverter plant certified for zone 4 seismic installations.

Conduit Junction Boxes: (not required when mainstream bypass is used) Larger inverter modules such as the 14 kVA through 21 kVA require substantial cable gauges. The conduit junction box is factory mounted to the back of the inverter module, easing conduit landing requirements and simplifying installation of rear or side mounted cable entry systems.

Download S4 Inverter Configuration Software
Note : The InverterSetup.ini and InverterSetup.exe files should be loaded in the same folder

Phone: 813-971-5001
Fax : 813-971-5117

Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Toll Free
1-800-783-6664

Sales@Omnicontrols.com

We guarantee a 24 hour response on all inquiries made via email.
For quicker response please call Omni Controls
at any of the above numbers