SIDEPAK™ Personal Sampling Pumps
You’ve
been there before. You grab a sample pump fresh off the charger, set it up, and
at the end of the day, you find out that the battery didn’t last the entire
work shift! The whole day is wasted!
Never again, if you use the SIDEPAK Personal Sampling Pumps with the Smart Battery Management System! Know how many hours of run time you’ll get before you start sampling. The built-in “gauge” in the SIDEPAK battery packs monitors battery condition and provides precise run time information in minutes.
Advanced
Flow Control
Data
Logging of Flow
Available
Models/Specifications
TrakPro™
Data Analysis Software
Integrated
Internal Low Flow Bypass
Software,
Kits, and Accessories
Product
Registration
Service
Downloads
(Brochures, Manuals, etc. Use your browser's back button to return)
Advanced
Flow Control
Calibrating sample pumps is time-consuming. You set up the external calibrator, attach your sample pumps and then proceed to adjust them. You make pre- and post-sample flow measurements to come up with an estimate of average flowrate and then calculate volume sampled from total run time.
Why guess when you can measure? SIDEPAK Personal Sampling Pumps with built-in precision flowmeters eliminate the day-to-day need for time-consuming calibration, saving you valuable time and money. Just set the SIDEPAK flow display to the desired flowrate and start sampling! It’s that easy!
What you don’t know can ruin your sampling results. You’ve seen it before. Pinched sample tubes, clogged inlet conditioners and sample media, and even sabotage!
With the SIDEPAK pumps, unintended flow interruptions are measured and
accounted for in total sample flowrate and volume measurement. The flowmeter
simply adjusts the pump speed as needed to maintain the flowrate setpoint.
Data Logging of Flow
With conventional pumps, it takes significant time to measure and estimate average flow with an external calibrator, determine sample run time, calculate an estimate of total volume sampled and then give your best estimate to the laboratory.
The SIDEPAK pump’s built-in data logging continuously records flow readings and accurately computes total sample volume even if interruptions occur. Your Industrial Hygiene Lab has never seen this level of sample reporting accuracy!
Document your results using TRAKPRO Data Analysis Software to download,
display and print the recorded sample history. A sample report template
accommodates your additional reporting requirements.
Available Models
| Feature | ||||
| Flow Range (cc/min) |
50 to 3,000
|
50 to 4,000
|
50 to 3,000
|
50 to 3,000
|
| Smart Battery Management System |
•
|
•
|
•
|
•
|
| Choice of NiMH or AA-size Battery Packs |
•
|
•
|
•
|
•
|
| Internal Battery Charger |
•
|
•
|
•
|
•
|
| Keypad Programming |
•
|
•
|
•
|
•
|
| Flow Block Detection and Auto-restart |
•
|
•
|
•
|
•
|
| Keypad Lockout |
•
|
•
|
•
|
•
|
| Multiple Lightweight Configurations |
•
|
•
|
•
|
•
|
| Continuous Flow Mode |
•
|
•
|
•
|
•
|
| Constant Pressure Mode |
•
|
•
|
•
|
|
| Internal Low Flow Bypass |
|
|
|
•
|
| Internal Precision flowmeter |
|
|
•
|
•
|
| Continuous Data Logging of flowrate |
|
|
•
|
•
|
| Data Logging of Both High and Low Flow |
|
|
|
•
|
| Intermittent Sampling Capability |
|
|
•
|
•
|
| TRAKPRO Data Analysis Software |
|
|
•
|
•
|
- Model
SP330
The SIDEPAK SP330 pump is a rugged, basic, 3-liter pump. It offers a choice of battery packs that incorporate TSI’s Smart Battery Management System.
- Model SP350
The SIDEPAK SP350 pump is a rugged, basic, 5-liter pump. It offers a choice of battery packs that incorporate TSI’s Smart Battery Management System.
- Model SP530
The SIDEPAK Model SP530 pump offers all the features of the SP330 plus an additional precision flowmeter that acts as a secondary flow measurement standard. Unlike conventional pumps, this 3-liter pump continuously measures and data logs flowrate over a very wide range to provide precise control, accurate total sample volume and average flowrate information.
- Model SP730
The SIDEPAK Model SP730 pump offers the features of the SP530 plus an integrated internal low-flow bypass.
TRAKPRO™ Data Analysis Software
Exposure monitoring is a complex business. With TRAKPRO software, you can easily program the SIDEPAK Personal Sampling Pumps from your PC for multimode operation.
- Program the pump for time-based operation and let it measure sample volume
- Specify the sample duration with a delayed start, or program specific start/stop times using the internal real-time clock/calendar
- Use volume-based sampling and have the pump stop when the predetermined volume setpoint is achieved
- Manually start/stop (any number of times) and let the pump compute sample volume
- Program for intermittent sampling by specifying the amount of sample run time and the total duration of the sample period
Report
Generation with TRAKPRO Data Analysis Software
Integrated Internal Low Flow Bypass
Unlike conventional pumps, the SIDEPAK SP730 Personal Sampling Pump permits precise low-flow control and measurement, without an awkward external bypass controller.
Sorbent tube heaven! There is no need to use an external calibrator to set low flowrates. Simply engage the integrated internal low-flow bypass, set the desired low flowrate and start sampling. That’s it! The internal flowmeter takes over and precisely maintains the flow at the selected flow setpoint.
