Wavetek Electronic Test Equipment
Frequency/Universal Counters
Benchtop
Function Generators
- FG2C - 3MHz, Pulse Output, DC
Offset, Duty-Cycle Control (178,143)
- FG3C - 3MHz, Linear or Log Sweep, AM, FM, VCF, LED Display (171,824)
| Wavetek Meterman FG2C | 1-800-783-6664 |
| Function Generator | $259 |
|
The FG2C Function Generator is a
low-cost, high-performance function generator with numerous output
functions. The instrument is easy to use and fast to set with
push-button selection of power, frequency range and waveform. Standard
outputs include both TTL level and CMOS pulse outputs and an
adjustable amplitude, low impedance output or low distortion sine,
square, or triangle wave signals.
|
 |
 |
| Wavetek Meterman FG3C | 1-800-783-6664 |
| Sweep/Function Generator | $499 |
|
The FG3C Sweep/Function
Generator is a low-cost instrument which features outstanding
versatility, performance and five available signals. The signals
available include sine wave, triangle wave, TTL pulses and CMOS
pulses. The unit provides linear or logarithmic sweep of any of the
selected signal outputs and performs either amplitude or frequency
modulation with internal or external modulating frequencies.
|
 |
|
Component, Temperature, Continuity Testers
-
TM45 Meters - Thermometer
| Wavetek Meterman CR50 | 1-800-783-6664 |
| Capacitance and Resistance Meter | $73 |
|
The CR50 Capacitance and
Resistance Meter is a versatile, complete capacitance meter and
resistance meter in one. Users considering purchasing just a
"C-Meter" will get greater value with the CR50 because it
includes a full range "R-meter" at no extra cost! The CR50
measures capacitance in nine ranges from 200pF to 20mF with a
resolution to 0.1pF in the 200pF range. To assure optimum accuracy
an external "Zero" pot adjusts out stray capacitance from
test leads in the 200pF range. For resistance measuring there are
seven ranges from 20 Ohm to 20 Mohm, with 0.01 Ohm resolution in the
20 Ohm range. The "low ohms" 20 Ohm range also features
its own "zero" pot and is a measuring function typically
found only in expensive, bench-grade meters. The meter also includes
a diode test function and Tech-preferred™ continuity beeper
feature never found on just a C-meter. Large, 0.7" (17mm) high
display characters and annunciators within the display to echo the
selected range provide optimum readability and user accuracy. Test
leads include screw-on alligator clips for easy attachment to
components and lead wires.
|
|
|
|
|
