W2040
Loop Powered DPM

Download

Digitec's Model D2040 is a low-cost, short depth digital panel meter with LCD redout. The meter is powered by the current being measured and has selectable full scale input ranges of 20mA and 50mA. User adjustable scale (gain), offset and decimal point allow immediate calibration of measurement being dispayed.

	31/2-Digit full-size LCD 0.6" high
	Small size: 2.3" × 4.13" × 1.25"
	Fits 1/8 DIN cutouts
	Only 1.25" required behind the panel
	Programmable decimal point
	Powered by the current being measured (less than 3.2 volt drop with 20mA input current)
	Connectors Included
	Non-interactive potentiometer setup for scale (gain) and offset.
	Two (2) wires for total hook-up
	Made in USA
	Easily scaled to desired display using potentionmeters
	NEMA 4X
Back to top

W2410 Series

Download

The 2410 is a low cost, short depth digital panel meter with a highly visible LED readout. The 3˝ digit DC voltmeter is a single range, bipolar. The meter is powered by an external +5VDC supply and has selectable full scale ranges from 200mV to 1000V. The 2410 can also be configured as a DC current meter with full scale ranges from 2mA to 2A.

The 2410 brings unprecedented reliability and accuracy to the low cost digital panel meter market, UNDER $80.00. For the first time, a low cost meter is backed by Westcon’s outstanding technical support and commitment to customer service. The 2410, the right meter at the right price.

	3˝ digit full-size LED, 0.56" high
	Small size 1.9" × 4" × 1.115"
	Only 0.5" required behind the panel
	Auto-zeroing
	Fits 1/8 DIN cutout
	Programmable decimal
	+5 VDC power
	Connector included
	Made in the USA
Back to top

W2420 Series

Download

The 2420 is a low cost, short depth digital panel meter with LCD readout. The meter is powered by the current loop being measured and has selectable full scale range of 4-20mA and 10-50 mA. User adjustable scale (gain), offset and decimal point allow immediate display in the engineering unit of the input being measured.

	3˝ digit full-size LCD, 0.6" high
	Small size 1.9" × 4" × 1.115"
	Only 0.5" required behind the panel
	Fits 1/8 DIN cutout
	Programmable decimal
	Powered by the current being measured (less than 3.2 volt drop with 20mA input current)
	Connector included
	Non-interactive potentiometer setup for scale (gain) and offset
	Two wires for total hook-up
	Made in the USA
Back to top

W2425 Series

Download

Here is a full function DPM from the name that pioneered dual slope A/D conversion. The Model 2425 takes advantage of the latest IC technology, resulting in a high quality meter priced as much as 35% below standard models.

	3-˝" Digit LED Display
	10 Available Functions
	Field Modifiable
	1/8" DIN case
	Quality components
	Rugged Construction
Back to top

W2430 Series

Download

The Series 2435A/2436A is a family of 3˝-digit LED display, single-range, line-powered panel meters offering a wide selection of standard ranges and functions. The basic instruments measure DC volts in four ranges from 200mV to 200VDC. The basic (DCV) meters are stocked at local distributors, as well as standard

	LED Display
	0.05% Accuracy — on all ranges.
	Four Basic DCV Ranges — 200mV - 200V
	Standard Option Kits offer hundreds of configurations
	Ratiometric Option, at a reference voltage of 1.00V ±20%
	0° - 65°C Operation
	Auto-zero — automatic zero and polarity eliminate zero calibration adjustment and allow direct reading of + and - input signals.
	“True Bipolar” Integration — eliminates dead zone around zero, no skewing.
	Universally Powered — 115/230VAC ±15% with 500 VRMS isolation.
	BCD Output Option — 8-4-2-1 parallel latched.
	3 Output Voltages to Power Auxiliary Circuits: +5V@25mA; -5V@25mA; +5V@60mA
	3 Different Reading-Rate Capabilities — 3 rdg./sec. (standard); 7.5 or 15 rdg./sec. (Optional).
Back to top

W2470 Series

Download

The Weston 2470 Series are a family of 4˝-digit, high-accuracy, line-powered, single-range panel meters. The series offers a high-brightness LED displays with five DC ranges from 20mV full scale with 1µV resolution, to 200V full scale with 10mV resolution.

All models provide automatic zero calibration, accuracy of ±0.005% rdg ±2 digits, and an auxiliary power supply output of ±12VDC or + 5VDC. Options include a parallel-BCD output with 200V RMS isolation (Models 2472) as well as direct readout in engineering units such as psi, pH, °C, or oF (all models). Any model may be adapted to 4-20mA current-Ioop and 1-5V voltage loop data transmitters.

	Accuracy: ±0.005% rdg ±2 digits
	±1 Count Stability at zero over the full operating temperature range.
	LED — Models 2471 and 2472 provide high-brightness, 0.56" high LED display.
	Fast Warm Up Time —temperature controlled zener voltage reference eliminates temperature shifts.
	Direct Readout in Engineering Units — psi, pH, °C, °F, or other options.
	Isolated, Parallel BCD Output — available in Models 2472.
	Four Current Ranges: — 200µA to 200mA
	Three Auxiliary Power Supply Outputs — ±12VDC or +5VDC for driving external circuits.
	Automatic Zero and Polarity — eliminates calibration adjustments and allow direct readings of + and - signal inputs.
	Low Power Consumption — Special circuit design provides cool running operation in industrial environments.
	Low Noise — Patented Westcon Dual Slope Integration provides excellent noise rejection.
	Ratiometric Operation optional.
Back to top

W2550 Series

Download

The 2550A series is a versatile, microprocessor-based digital meter that is well suited for a wide range of OEM applications. The software features a fully prompted setup routine in which you can enter two high and two low setpoints, hysteresis (deadband) value, offset and scale values, and placement of the decimal point. The meter will accept any standard industrial voltage or milliamp input.

	User-programmable via improved front panel membrane keypad
	Front panel scale and offset converts voltage or current inputs to engineering units.
	Inputs include DC voltage and current, process monitor (all standard input ranges), thermocouple (1 degree or 0.1 degree resolution), and strain gauge
	Dual high and low setpoints with adjustable hysteresis
	Available in 3˝, 4 and 4˝ digit models
	Non-volatile memory protects setup data even when power is off
	High and low readings stored and displayed at the touch of a key
	Continuous self-calibration keeps readings stable and accurate
	Gasketed front panel provides an oil-tight seal
	Edge connector standard
	Security code protects user input, prevents unauthorized use
	Compact 1/8 DIN case
	Options: dual 5 amp relays, RS232C serial communications, analog output and 10VDC excitation supply.
Back to top

W3100
Explorer Series

Download

The Explorer W3100 Series is a low priced family of digital panel meters for industrial or laboratory measurement. These meters are standard with scaling, relay outputs, analog output, excitation and screw terminal connectors.

The meter display is a 3˝-digit or 4˝-digit resolution LED display. This family of meters can measure all common transducer outputs. There are seven models to choose: Process, RTD, Thermocouple (J & K), Strain Gage, AC (average), AC (RMS) and DC voltage/current models.

	Bright and long lasting LED display – available in Red or Green (optional).
	2 relay outputs.
	4 – 20mA or 0 – 10V analog output
	Front of instrument is drip proof and is dust tight.
	Optional NEMA 4 (IP65) cover is available
	Plug-in screw terminal connectors that accept wire up to 14 ga.
	Adjustable for spans of 200(0) to 1999(9) counts
	Offsets are adjustable to +/-100(0) counts around zero
	Slot on inside of front panel for displaying unit of measure from furnished decal sheet
	Excitation supplies of 10 Volt DC @ 120mA, maximum of +24 Volt @ 50mA (user selectable) standard on Strain Gage and Process Models
Back to top

W3200
Voyager Series

Download

W3300
Explorer Series

Download

The W3300 Series is a compliment to the W3100 Series with the W3300 being a basic display meter without relay or analog outputs. All other features, size, specifications, etc. are the same as the corresponding W3100 meter. See W3100 for specifications, feature and options.

	W3320/W3324 Series
	Model W3320 has 3˝ digit resolution.
	Model W3324 has 4˝ digit resolution.
	Inputs for 4-20mA, 0-10VDC and 1-5VDC are selectable.
	Standard with scaling and selectable 10VDC or 24VDC excitation supply.
	W3330/W3334 Series
	Model W3330 has 1° resolution.
	Model W3334 has .1° resolution.
	W3340/W3344 Series
	Input is 20mV. Model W3340 with 3˝ digit display and 10uV resolution.
	Model W3344 with 4˝ digit display and 1uV resolution.
	Standard with scaling and selectable 10VDC @ 120mA and 24VDC @ 50mA excitation supply.
	W3360/W3364 Series
	Model W3360 has 1° resolution.
	Model W3364 has .1° resolution.
	Temperature range of –148° to +1472°F (-100° to +800°C).
	W3370/W3374 Series
	Standard with scaling.
	See Data Sheet (click on button at left) for model/ranges:
Back to top

W3400 Series

Download

Largest LED Display Available with .8'' high characters in a 1/8 DIN Panel Meter Package. available in seven (7) different input models. also with space savings compared to other panel meters with 2.4'' behind the panel.

	3˝ digit full-size LED, 0.56" high
	Small size 1.9" × 4" × 1.115"
	Only 0.5" required behind the panel
	Auto-zeroing
	Fits 1/8 DIN cutout
	Programmable decimal
	+5 VDC power
	Connector included
	Made in the USA
Back to top

W3500 Series

Download

The 4 model Series W3500 offers a maximum display reading of 5 digits (up to 32000 counts). Output options for the W3500 are: 2/4 relays, or 4NPN/4PNP control outputs, and an Analog (0-10VDC/4-20mA) output signal. Also the unit offers a choice of RS-232 or RS-485 communication with (Modbus, ISO1745, or Westcon) protocol. The meter is easy to program with two types of scaling: (1) No calculation scaling (2) Load calibration. The W3500 has a standard warranty period of 3 years.

	Process, Strain Gage, Temperature, Frequency
	NEMA 4 certified
	12 point linearization
	Clamp-Wago type Terminal Connectors
	Front panel programmable decimal points
	Two scaling methods (by no calculation or load calibration)
	Optional: 2 or 4 relay, 4 NPN or PNP outputs
	Optional: RS232 or RS485 communication
	Optional: Analog 4-20mA or 0-10VDC output
	Available in 4 different input models:
	-Process
	-Temperature
	-Straingage
	-Counter/Freq.
	4 programmable REMOTE INPUTS
	Available in models powered by 115/230VAC,
	10-30VDC,24/48VAC
	3 YEAR WARRANTY
Back to top

W3600 Series

Download

The Westcon W3600 Series of Low Profile Digital Panel Meters are the new 3/64 DIN compact size ideal solution for meeting the measurement and display requirements of industrial applications, OEM’s and system designers

	3/64 DIN
	.94" h × 2.83" w (24mm × 72mm)
	-1999 to 9999 Digit, 0.56" LED Display
	IP65/NEMA 4 Front Panel
	Tare
	Two Alarm Relay Output
	85-264VAC Powered
	Excitation Supplies
	5/Sec Display Update Rate
	Options: Analog Output, RS232 & Infrared Remote Setup
Back to top

W3700 Series

Download

The W3700 series digital panel meters are the most versatile and powerful meters on the market. These meters are available as either the single channel W3720 or the dual channel W3722. The meter’s 6 digit display, high speed measurement (60/sec. update rate) makes this the perfect choice for those most demanding applications. The W3700 also includes 4 assignable front keys, 4 assignable remote inputs, user defined defaults and a variety of menu lockout features. Combine all this with its good looks, industrialized aluminum case, NEMA 4X construction, 13 indicating LEDs, and snap-action buttons and you have a meter ready for all applications.

The W3722 offers two input channels with a third channel for mathematical calculations. Standard formula includes sum, difference and product. A complete math package is in the W3700 firmware. Please contact Westcon for implementing your specific equation.

	6 digit Red LED display
	Peak Capture model (-02) is 10,000 readings/sec. capture rate
	60/sec. Update Rate
	20 point linearization
	Tare gross/net operation
	Dual scale setup (English/Metric)
	18VDC @ 200mA excitation supply
	Math channel
	1/8 DIN extruded aluminum case
	NEMA 4X rated front
	Shunt calibration (channel 1 only)
	No calculation scaling
	Calibrated load scaling
	User definable defaults
	User programmable keys and remote inputs
	Relay for alarm/shunt calibration
Back to top

W5000 Series
Large Displays

Download

DigiTec's D5000 Series is ideal for measuring and displaying data from all applications. The NEMA 4 rating of the complete display including connectors makes it ideal for all industrial environments. The universal powered D5000 Series works off of any 95 to 265VAC supply.
Available in 2", and 4" and 6" models. Consult factory for 8" and 11" models.

	Complete NEMA 4 rating
	Operates off a 95 to 265VAC supply without need to re-configure
	All models include a bidirectional RS485 interface
	13VDC @ 50mA excitation supply
	Panel, well or suspension mounting kit of users choice
	2" and 4" displays are ultrabright, high efficiency and LEDs
	Programming of displays is by 3 contact closures or serial input
	4 selectable brightness ranges
	10 year nonvolatile memory
Back to top

W5600/W5700 Series
Large Displays

Download

.The W5600 and W700 offer an economical alternative to the W5250 and W5300 series, for applications not requiring NEMA4 sealing. Designed for use in clean indoor environments. All settings may be adjusted remotely by way of hardwired remote pushbuttons, which activate the menu-free setup system. LED annunciator lamps on the front panel let you know which parameter you are changing and also provide visual alarm status.

	Low cost, attractive styling
	Dual Alarms included as standard
	RS422 retransmission output
	Remotely Scalable
	Excitation supply included
	Universal Power Supply
	High noise immunity
	Wall or suspension mounting
	Simple to install
Back to top

W5228/W5248/W5249
Series
Large Displays

Download

Westcon's Marquee Displays are an economic solution to problems involving communication with workers at a distance. They can be used to display safety alerts, machine status, production counts and similar messages. They are S2 compatible devices that can operate with personal and single board computers, as well as basic or ASCII modules of programmable controllers.

	Viewing Range of 125 feet for 2" tall characters, up to 275 feet for 4.5" characters
	Message options include blinking, horizontal and vertical scrolling and embedded variable data.
	Universal Mounting Brackets allow top, surface or suspended mounting
	Units can be stacked together or mounted back to back for biderectional viewing
	Communicates using our S2 Protocol via optically isolated RS232 or RS422 ports
	5A, SPDT Relay Alarm Output can be used to sound siren or strobe light
	Easily connect to major brands of PLC using our Communication Gateway devices (W9450/W9650)
	Store and retrieve messages and message groups 115VAC Power Standard, 24VDC and 230VAC also available
	MU Message Utilty Software included
	W5228:
	4.0"H × 40.5"W × 4.25"D (10cm × 103cm × 11cm)
	W5248:
	4.0"H × 40.5"W × 4.25"D (10cm × 103cm × 11cm)
	W5249:
	4.0"H × 40.5"W × 4.25"D (10cm × 103cm × 11cm)
Back to top

WLINK & ISC
Configuration Software

Downloadable files

The configuration software W Link requires a personal computer with 486 or better, a serial RS232 port and Windows® 3.1, 95/98 or NT4.0 The communication cable MCOMM with isolated adapter does not require any power supply. The software lets you prepare configurations, modify, save them as file, print them; then you can transfer them to any transmitter. W Link is a multifunction software able to configure all W3200, W3600 panel meters as well as WMTX transmitters. ATCWestcon will provide this software free of charge to all customers and you can also download the last updated version at www.atcwestcon.com

	Full integrated software for W3600, W3200 panel meters and series WMTX transmitters
	Input, output, display and functions configuration
	Intuitive and easy to use interface
	Data entry validation
	Editing, printing and saving of the configuration
	Input and Output signal monitoring in numerical or analog form
	Windows® 3.1, 95/98 or NT freeware application requires I-S-C adapter to connect the PC to the instruments
.Back to top

Phone: 813-971-5001
Fax : 813-971-5117

Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Toll Free
1-800-783-6664

Sales@Omnicontrols.com

We guarantee a 24 hour response on all inquiries made via email.
For quicker response please call Omni Controls
at any of the above numbers