Single AXIS DIGITAL AC GAUSSMETER

Typical Applications include checking the 50 and 60 HZ electric and magnetic fields produced by such equipment as transmission lines, computers, electric blankets, electric appliances, televisions, etc.. Magnetic fields are invisible radiations, the best method to detect them is by using one of the accurate gaussmeter from Omni Controls Inc.
	Commercial AC Magnetic Field Meters IDR-109 (60 Hz) IDR-119 (50 Hz) $595.00 Specifications Portable Auditory and visual Alarm Remarkable Linearity Narrow Bandpass Filter Sturdy Shielded and Grounded Probe 200 mV recorder Output Range Settings: 2, 20, 200, 2000 milliguass Bandwidth: 11 hertz at 3db Battery life: at least 48 hours with one 9v alkaline battery included Weight: 15 oz. (425 grams) Sensor: External Air coil type with 8" handle Error 1% maximum based on EPA report Zipper case is included Minimum detectable signal: 76 microgauss Resolution: 0.37% @ 101 mG 2 Years Parts & Labor warranty Highly recommended for researches Custom models available (180 Hz, etc...) Made in the USA
	Consumer AC Magnetic Field Meters IDR-27 (60 Hz) IDR-28 (50 Hz) $375.00 Specifications: Range Settings: .01 - 199.9 milligauss Bandwidth: 11 Hertz at 3db Battery Life: 72 hours with 9v alkaline included Auditory, clicking response to reading Sensor: External Air coil type with 8" handle Error: 4% maximum based on EPA report 200 mV Recorder Output Narrow Bandpass Filter Minimum detectable signal: 392 microgauss Resolution: 0.17% @ 94 mG 2 Years Parts & Labor warranty Made in the USA
	ELF Gaussmeter IDR-26 (60 Hz) IDR-25 (50 Hz) $199.00 Specifications: Low cost portable home model Large, easy-to-read 3.5 digit display 4% Error Guarantee based on EPA report Sensor air coil type is located inside at the top of the unit Range: 0.1 - 199.9 milligauss Free deluxe carrying case Battery_powererd(batteries included) Narrow Bandpass Filter Minimum detectable signal: 392 microgauss Resolution: 0.17% @ 94 mG 2 Years Parts & Labor warranty Made in the USA
	AC Electric Field Meters IDR-155 $295.00 Specifications Hooks directly to probe input on AC magnetic field meter IDR-109 Error: 10% Includes 4 foot handle Range settings: 20, 200, 2000, 20,000

3 AXIS DIGITAL 50/60HZ AC GAUSSMETER

Low Cost, High Quality 3-Axis Meter

This model features three axis sensors which insure that measurements remain accurate regardless of the orientation of the instrument.

Lightweight and self-contained, this unit is ideal for commercial and home use. This model accurately measures Extremely Low Frequency magnetic fields (ELF) generated by electrical equipment. Applications include detecting magnetic field emissions from a wide variety of sources, including video display terminals (VDTs), AC power lines, office equipment, household appliances, and all types of electric and electronic equipment.

This meter is auto-ranging with 3 1/2 digit LCD, true RMS and includes a deluxe carrying case, 9 volt alkaline battery, and a one year mfr. warranty. Amazing high accuracy of ±(2% +1) digit, resolution 0.1mG, calibrated @ 60Hz, operating temp. 0 deg.C to 50 deg.C, weight 5 OZ, 4.7"H 2.4"W 1.0"D, wide frequency response: 25-1000 Hz, covers 0.1 - 511 mG. Accuracy traceable to NIST standards. Highly recommended!

3 AXIS DIGITAL AC GAUSSMETER: IDR-fw4080 ........... $255.00

PROFESSIONAL 3-AXIS DIGITAL GAUSSMETER

Switchable Single and Triple Axis Measurements

For professional results, this meter offers the ultimate in accuracy and features: extended frequency bandwidth, superb accuracy, single axis and 3-axis modes, auto-ranging from 0.1 to 1999 mG, an A - Analog Output option provides a buffered output for viewing the analog waveform on an oscilloscope, spectrum analyzer, or similar test equipment. This is useful for determining harmonic content and other waveform properties. (z -axis only), a D- DC Output option provides a voltage level proportional to the displayed level of the magnetic field. It is useful for driving chart recorders, data loggers, and other data acquisition equipment. Hand held, and completely self-contained, it is extremely fast and easy to use. Simply turn the unit on and take true RMS 3-axis readings. To activate the single-axis Mode, depress the push-button on the top panel firmly once to view the X-axis component of the field strength, a second press gives the Y-axis component, a third press shows the Z-axis. This is a really fine piece of equipment at a great price. Made is USA. Full year warranty. Accuracy traceable to NIST standards. 9V battery included.

 

Specifications:
Frequency Range	20-2000 Hz
Mode	switchable single or triple axis
Field Strength	0.1 – 1999 mG RMS autoranging
Accuracy	60 Hz: ±(1% +1 digit); 40-200 Hz: ±5%; 20-2000 Hz: -3dB
Analog Output	5 mVAC/mG, up to 200 mG max. Output impedence is 4000 Ohms

Professional 3-Axis Digital Gaussmeter: FW4090..... $690.00

New!
Professional 3-Axis Digital Gaussmeter, economy version
IDR-fw490e ……. $490.00