DET10C, DET20C

Earth/Ground Resistance Clamp Testers

     

    MEGGER OFFERS NEW COMPACT CLAMP-ON GROUND TESTER
     
    Designed to measure earth/ground resistance and current flow in a way that will not disturb existing connections, the new compact Megger DET10C and DET20C ground testers utilize exclusive clamp-on technology to give users a quick, accurate measurement.  The unique design of these new Megger models induces a test current directly into the system and effectively updates the old methods of testing that may require disconnection or additional equipment. 
     
    This easy, remarkably fast clamp-on operation also assures users both convenience and safety -  a single point of measurement reads the earth/ground resistance and no disconnection means users can now test resistance in multiple loop installations with no additional risk.  
     
    Megger recognizes that users need extensive data storage and has equipped the DET20C with a RS-232 interface cable to download test data for further analysis.  Because the RS-232 interface cable is compatible with Megger Download manager Software, the user will be able to download the results back in the office instead of doing on on-site analysis.  The unit can accommodate up to 8180 records. 

     
    These high-quality instruments are ideal for testers who need to measure resistance and continuity of grounding loops around pads and buildings or to inspect and verify lightning protection systems.  They are also exemplary in measuring leakage current flowing to the ground or circulating in ground systems.  Their unique design makes them well-suited for use on cell towers, and all telecommunications sites as well as on consumer installations such as pools and spas.     
     
    To effectively do these jobs, the testers also feature a large jaw opening to easily accommodate cables, a hold function for difficult to reach installations and a large LCD display screen that can be read even in bright sunlight.  Both the DET10C and DET20C are equipped with configurable audible alarms.     
    Clamp-On Ground Tester
    Clamp-On Ground Tester- ( mgDET10C )
    • Measures Ground Resistance from 25 mohm to 1550 ohms• Measures Ground Leakage current ...

    Price      $1,550.00

MMC850

Multi-core AC digital clamp meter

DESCRIPTION

The NEW Megger MMC850 offers a unique solution to current measurement in multi-core cables, without theneed to split cores. Simply clamp the MMC850 to a multicore cable and read the current flowing. Conventional current clamp meters have been available for many years and are an accepted method of non-intrusive current measurement. However these instruments can only measure current in a single core cable, requiring multicore
cables to be split before a core can be measured. Unlike conventional clamp meters, the MMC850 has a      complex array of Planer magnetic sensor coils to calculate the current flowing in the conductors of multicore cables with either 2 or 3 cores, and in either flat or round section cable, up to 100 A. The convenience and potential timesaving from using the multi-core clamp is considerable.

Single, two or three core cable measurement
Flat or round section cables
 No need to split wires
Cable centralising clamp
Backlit display
50Hz and 60Hz supplies
IEC 1010-2-032, CAT III 600 V safety protection

MMC850

Megger True RMS Clampmeter; 200 A
Megger True RMS Clampmeter; 200 A- ( mgDCM104R )
• a.c. and d.c. Amps, Ohms, Diode and Continuity• RMS measurement• Auto-ranging and ...

Price  $465.00
Megger Current Clampmeter; 600 A
Megger Current Clampmeter; 600 A- ( mgDCM2033 )
• Multi-meter clamp accessory to 400A ac• Clamp-on multimeter: measures to 600A ac, 600V ...

Price  $199.00
 
Megger Multi-Conductor Current Clamp
Megger Multi-Conductor Current Clamp- ( mgDCM1000P )
• Performs seven basic power measurements• Clamp on for measurement, no need to break ...

Price  $670.00
 
Megger Digital Clamp-on Power Meter DataLogger
Megger Digital Clamp-on Power Meter DataLogger- ( mgDCM2000P )
MEGGER DCM2000PPower Clampmeter• W, VA, VAR, kWH and power factor measurement even on ...

Price  $1,275.00
 
 
Megger®
MEGGER DCM2000P MEGGER DCM2000P
Power Clampmeter
 Specs - PDF
  • W, VA, VAR, kWH and power factor measurement even on distorted waveforms 
  • AC/DC current up to 2000 Amps 
  • True RMS, peak, crest factor, total harmonic distortion, distortion factor, frequency measurement, and dc ripple 
  • 3 phase power capability 
  • Live harmonic analysis, bar graph display 
  • Simultaneous display of multiple parameters plus waveform and chart displays 
  • Internal logging of five parameters with 5000 readings 
  • Real-time logging or download to optional PowerLog software 
The Megger DCM2000P Power Clampmeter combines the functionality of power meter, oscilloscope, harmonics meter and data logger in one easy to use package. The design meets the requirements of BSEN 61010-1 600V Cat IV for supply side applications.

A large backlit dot matrix LCD clearly displays waveforms, harmonics, chart trends and up to five parameters at a time. The DCM2000P can measure dc, ac, pulsed and mixed currents up to 2000 A, voltages up to 600 V, all power related parameters including energy consumption, frequency, crest factor, total harmonic distortion, distortion factor and ripple. It features auto ranging and auto-zeroing and has a built-in three-phase adapter for power measurements.

This battery-operated precision power meter can transmit both stored and live measurements to a PC running AVO PowerLog software for further analysis if required. The DCM2000P is ideally suited to measure mains power quality and applications in the development, installation, maintenance and repair of equipment and devices used in power electronics and power engineering. It simplifies the compensation of reactive power, even for complex waveforms with high harmonic distortion.

 
MEGGER DCM1000P

MEGGER DCM1000P
Digital Power Clampmeter

Specs - PDF

• Performs seven basic power measurements
• Clamp on for measurement, no need to break the circuit
• Optional software for logging or trend analysis
• True RMS, ac, dc and ac + dc
• Direct measurement of balanced 3-phase power

The Megger DCM1000P is an advanced clampmeter, giving true RMS readings of not only current and voltage, but of power quantities too. It measures ac and dc true RMS, giving accurate results even with distorted waveforms. Measurement can be made of power, apparent power, reactive power, and power factor, in single-phase and balanced three-phase systems with no need for additional adapters or calculations. Clamp-on power meters are the ideal hand-held instruments for use in the installation, maintenance, monitoring or checking of electrical systems and equipment.

As with all AVO products, the Power Clampmeter offers the high quality and precise measuring circuitry expected from the AVO name. Measurements can be taken regardless of waveform and up to a crest factor of 5. These unique instruments also measure power factor and frequency.

In addition to indicating the measurement on the large 3 1/2 digit LCD, each multimeter automatically displays the engineering unit (A, V, kW, etc.) of the quantity being measured and an indication of whether ac or dc, or a composite ac+dc signal.

An automatic power-off function helps extend battery life; low-battery indication is displayed when the time for replacement is near. Battery life is typically 12 hours continuous use.

 

 Multimeters/Clampmeters :

DCM Series Model DCM2031, DCM2033, DCM2039

DCM Series Model DCM2031, DCM2033, DCM2039
Digital Clamp-on Meter

• Multi-meter clamp accessory to 400A ac
• Clamp-on multimeter: measures to 600A ac, 600V ac and 40 kilohm
• High current ac/dc clampmeter to 7000A

 
DCM-R Series Model DCM24R, 204R, 104R

DCM-R Series Model DCM24R, 204R, 104R
AC/DC True RMS Digital Clampmeter

• a.c. and d.c. Amps, Ohms, Diode and Continuity
• RMS measurement
• Auto-ranging and auto-zeroing
• Excellent accuracy

 

AVO's DCMR Series of digital clampmeters have a 4 digit LCD and are available in different version for maximum currents of 200A, 1000A and 2000A. They feature auto-ranging and auto-zeroing and can measure a.c., d.c., pulsed and mixed currents. Additional functions include the measurements of voltage, resistance, continuity and a diode test. the overall accuracy of 1.3% of the measured value has been achieved by utilizing the largest microprocessor technology, plus the use of a true RMS measuring technique. This accuracy even applies when harmonics or

Ideal for swift, reliable measurement of current in the field. There is an DCM Clampmeter to suit your requirements. Their robust design survives day-in, day-out use, whether in the toolbag or out, and all are built for safety and are compliant with IEC1010-2-032 greater than or equal to 600 V cat II.

MEGGER DCM1000P

MEGGER DCM1000P
Digital Power Clampmeter

• Performs seven basic power measurements
• Clamp on for measurement, no need to break the circuit
• Optional software for logging or trend analysis
• True RMS, ac, dc and ac + dc
• Direct measurement of balanced 3-phase power

 

The Megger DCM1000P is an advanced clampmeter, giving true RMS readings of not only current and voltage, but of power quantities too. It measures ac and dc true RMS, giving accurate results even with distorted waveforms. Measurement can be made of power, apparent power, reactive power, and power factor, in single-phase and balanced three-phase systems with no need for additional adapters or calculations. Clamp-on power meters are the ideal hand-held instruments for use in the installation, maintenance, monitoring or checking of electrical systems and equipment.

As with all AVO products, the Power Clampmeter offers the high quality and precise measuring circuitry expected from the AVO name. Measurements can be taken regardless of waveform and up to a crest factor of 5. These unique instruments also measure power factor and frequency.

In addition to indicating the measurement on the large 3 1/2 digit LCD, each multimeter automatically displays the engineering unit (A, V, kW, etc.) of the quantity being measured and an indication of whether ac or dc, or a composite ac+dc signal.

An automatic power-off function helps extend battery life; low-battery indication is displayed when the time for replacement is near. Battery life is typically 12 hours continuous use.

MEGGER DCM2000P

MEGGER DCM2000P
Power Clampmeter

• W, VA, VAR, kWH and power factor measurement even on distorted waveforms
• AC/DC current up to 2000 Amps
• True RMS, peak, crest factor, total harmonic distortion, distortion factor, frequency measurement, and dc ripple
• 3 phase power capability
• Live harmonic analysis, bar graph display
• Simultaneous display of multiple parameters plus waveform and chart displays
• Internal logging of five parameters with 5000 readings
• Real-time logging or download to optional PowerLog software

 

The Megger DCM2000P Power Clampmeter combines the functionality of power meter, oscilloscope, harmonics meter and data logger in one easy to use package. The design meets the requirements of BSEN 61010-1 600V Cat IV for supply side applications. A large backlit dot matrix LCD clearly displays waveforms, harmonics, chart trends and up to five parameters at a time. The DCM2000P can measure dc, ac, pulsed and mixed currents up to 2000 A, voltages up to 600 V, all power related parameters including energy consumption, frequency, crest factor, total harmonic distortion, distortion factor and ripple. It features auto ranging and auto-zeroing and has a built-in three-phase adapter for power measurements.

This battery-operated precision power meter can transmit both stored and live measurements to a PC running AVO PowerLog software for further analysis if required. The DCM2000P is ideally suited to measure mains power quality and applications in the development, installation, maintenance and repair of equipment and devices used in power electronics and power engineering. It simplifies the compensation of reactive power, even for complex waveforms with high harmonic distortion
MEGGER DCM300E

MEGGER DCM300E
Leakage Clampmeter

• 0.01 mA resolution
• EMC and EN1010-2-32 compliance
• 30 mA, 300 mA, 30 A and 300 A range

 

The DCM300E Earth Leakage Clamp designed primarily to check earth leakage currents with a dedicated 30 mA range providing resolution down to 10 µA. The capabilities of the DCM300E extend to measuring currents of up to 300 A ac, making it a highly versatile instrument capable of taking current measurements in a wide variety of situations and applications.

A typical application for the DCM300E would be the measurement of earth leakage current in a circuit where the GFCI repeatedly trips out. The measured result will quickly identify whether an excessive leakage current is causing the GFCI to trip, or if the GFCI itself is faulty. The DCM300E has 4 ranges: 30 mA, 300 mA, 30 A and 300 A with a best resolution of 0.01 mA. The analog-style bargraph of the DCM300E is very useful when monitoring changes, allowing the operator to easily interpret the rapidly changing bargraph rather than the digital display. Other key functions include the "Data Hold" feature which aids in measurements where there is a problem with accessibility or poor lighting, and the automatic power off feature that extends the battery life.

This clampmeter was also designed with safety in mind and exceeds the latest safety design standards IEC1010-2-32 and EMC requirements. Extra safety features have been designed into the DCM300E to provide a safer working environment for the user.

 

MEGGER FlexiClamp 200

MEGGER FlexiClamp 200 is being replaced with the New
MMC850 Multi/Single core A.C. Clampmeter

• No need to split cables
• Measures current in 1, 2 or 3 core cable
• Check current anywhere in installation
• Micro-processor controlled for
dependability and accuracy

 

MMC850

Multi-core AC digital clamp meter

DESCRIPTION

The NEW Megger MMC850 offers a unique solution to current measurement in multi-core cables, without theneed to split cores. Simply clamp the MMC850 to a multicore cable and read the current flowing. Conventional current clamp meters have been available for many years and are an accepted method of non-intrusive current measurement. However these instruments can only measure current in a single core cable, requiring multicore
cables to be split before a core can be measured. Unlike conventional clamp meters, the MMC850 has a      complex array of Planer magnetic sensor coils to calculate the current flowing in the conductors of multicore cables with either 2 or 3 cores, and in either flat or round section cable, up to 100 A. The convenience and potential timesaving from using the multi-core clamp is considerable.

Single, two or three core cable measurement
Flat or round section cables
 No need to split wires
Cable centralising clamp
Backlit display
50Hz and 60Hz supplies
IEC 1010-2-032, CAT III 600 V safety protection

MMC850

 

Clampmeters Test Instruments:
DCM24R True RMS Clampmeter; 200 A $430.00
DCM104R True RMS Clampmeter; 1000 A $430.00
DCM204R True RMS Clampmeter; 2000 A $495.00
DCM2031 Current Clampmeter; 400 A $95.00
DCM2033 Current Clampmeter; 600 A $195.00
DCM2039 Current Clampmeter; 1000 A $290.00
DCM300E Leakage Clampmeter; 300 mA/300 A $395.00
278003 Digital AC Clampmeter N/A
MMC850 FlexiClamp Multi-Wire Current Clamp $244.00
DCM1000P Digital Clamp-On Power Meter $640.00
DCM2000P Digital Clamp-On Power Meter/Datalogger $1,220.00
279000 NANOVIP Power Meter $730.00


   

 

Phone: 813-971-5001
Fax : 813-971-5117

Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Toll Free
1-800-783-6664

email sales@omnicontrols.com
Sales@Omnicontrols.com

We guarantee a 24 hour response on all inquiries made via email.
For quicker response please call Omni Controls
at any of the above numbers

 


Please Note: All prices subject to change without notice
copyright©omnicontrols.com - All Rights Reserved.
Terms and Conditions for Omni Controls Inc - online. Legal Disclaimer
Supplementary Information and Cover Art Copyright omnicontrols.com. All rights reserved.

copyright © omnicontrols 2005
Omni Controls Inc.
5309 Technology Dr.
Tampa, FL 33647

Email: sales@omnicontrols.com

Phone: 800-783-6664
Fax: 813-971-5117