HygroMate Handheld

Novasina's handheld humidity- and temperature measuring instruments are known for their high accuracy, robustness and user- friendliness. Our products are developed from professionals for professionals. For the first time service personnel in the comfort air conditioning field can benefit from the high quality and accurate climate measurement instrument from Novasina.

The battery powered HygroMate measuring instrument is easy to operate and has a robust capacitive humidity and temperature sensor cell. Furthermore the sensor is protected against pollution and damage by a metal-web filter.

The large and clearly readable display with backlight function is not only a eye catcher but allows a comfortable reading in every climate surroundings.

In addition to the relative humidity, other climate parameters as dew point and absolute water content can be displayed. The temperature unit can be displayed either in °C or °F.

For temporary measurement value analysis MIN / MAX, HOLD and AVG functions are available. Furthermore a date and time function as well as an integrated AutoOff function.

The main advantage of the device is possibility of a 2-point calibration for temperature and relative humidity by using the proven Novasina SC Check standard for the ranges of 11/33/
53/75/90 %rH. These SC Check standards allow a on site calibration.

Each HygroMate is delivered with a factory calibration certificate confirming a 2-point calibration for the relative humidity.

Different practical accessories for mounting, transport, storage and maintenance are also available.

All this at a unique price/ performance ratio!

Take this opportunity, ask for a non-binding offer from one of our worldwide distribution partners and benefit from the longstanding Novasina experience!

Humidity measurement:
1... 95% RH air humidity
-50 ... +50 °C dew point
0 ... 83g/kg mixing ratio
Accuracy :
± 2.0% RH (5....90%rF)
Reproduscabiltiy :ca. 1.0....1.5% RH
Temperature measurement:
-20 ... 50°C / -4...122°F
Accuracy :
± 0.3°C ( at 0 ... 40 °C)
± 0.5°C (out of...)
Reproduscabiltiy :Typ. ±0.3°C
Operation stemperature :
LCD device : 0 ... 50 °C
Sensor itself : -20 ... 50 °C
Electrical datas:
Power supply:
4 x 1.5 V primary battery
Typ : LR6 AA

Brochures :
Pro-HygroMate-DFE.pdf

T-Data :
Fly-HygroMate-english.pdf
Fly-HygroMate-german.pdf
Fly-HygroMate-francais.pdf
Fly-HygroMate-italiano.pdf
Fly-HygroMate-espanol.pdf

Catalogue / Spareparts:
Cat-HygroMate-english.pdf
Kat-HygroMate-german.pdf

ms 1(previously called Humicheck 6)

A hand-held instrument for measuring relative humidity and temperature.

Neatly designed, the Novasina ms1 is ideal for measuring relative air humidity and temperature. The unit also calculates and displays dew point temperature, specific enthalpy and other climatic parameters otherwise found only in the Mollier diagram.

Optional you can connect an PC or Laptop direct via an RS-232 interface and read data's into our NOVALOG 32 software tool.

Each instrument can test and adjust by 5 humidity points from 11% up to 90% RH.

An external power supply is available for 115 VAC and 230 VAC.

For temperature extension of the sensor limits, please contact the catalogue for accessories!

800-783-6664

Measuring range:
6... 95% RH
-10 ... +50°C
Sensor mounted separately:
-20 ... +80°C
Accuracy (related to saturated salt solutions at 25°C):
±1%RH (10 ... 90% RH)
±0,3°C
Repeatability:
±0,3% RH
(electrolytic physical measurement principle)
Power supply Standard:
9V battery or mains adapter
Adjusting / Calibration :
5 points between
11% and 90% RH

Brouchures:
Pro_ms-1_english.pdf
Pro_ms-1_German.pdf
Pro_ms-1_fancais.pdf

T-Data's :
Fly_ms-1_english.pdf
Fly_ms-1_German.pdf


Catalogue / Spare parts:
Cat-ms-1-english.pdf
Kat-ms-1-German.pdf

HygroGuard 20 with LCD

HygroGuard 10 without LCD

The climatical surveillance of install-ations, processes, storage areas, museums is today of more and more importance. Too precious are the products and objects. Quality insurance is a must today for all relevant processes.

It is exactly here that the Novasina Hygroguards 10 and 20 are optimally in operation. As a kind of modern thermo-hygrograph they always do valuable service. With a very long autonomy of up to 2 years (battery lifetime) and a memory capacity of 120'000 measuring points, relative humidity and temperature of rooms can be recorded and afterwards recalled in form of a table or graphics. A simple to operate software called "SmartGraph ll" offers additional functions, such as eg. the simultaneous management and configuration of many HygroGuards and recording of their data.

The system is delivered as a complete solution and includes besides the autonomous data logger (with or without LC-Display) also a battery, a special data interface cable, the SmartGraph II analysis and configuration software, together with the corresponding instruction manuals on a CD.

Multiple, useful accessories complement the data logger system ideally.

Start now to record without interruptions your important climatic parameter data!

Humidity measurement:
10... 95%rh air humidity
Resolution:
0.1 %rh
Accuracy:
± 2.0%rh (10....85%rh)
Reproducibility:
ca. 1.0....1.5%rh
Temperature measurement:
-20 ... 50°C
Resolution:
0.1°C
Accuracy:
± 0.3°C (at 0 ... 40°C)
± 0.5°C (rest)
Reproducibility:
Typ. ±0.3°C
Operating temperature range:
Without LC-Display: -20 ... 50°C
With LC-Display: 0 ... 50°C
Electrical Data:
Power supply:
1x 3.6V Lithium primary battery
Type: LS 14500 3.6V

HygroDat 100 Poly

The Novasina HygroDat humidity and temperature transmitters were specially developed to control industrial processes with high demands on measuring accuracy.

The HygroDat 100 is available in aluminium- or polycarbonate case as well as in 2 different power supply versions:

HygroDat Alu 100/24V
for power supply off 16 ... 30 VAC or 15 ... 40 VDC

HygroDat Alu 100/230V
for power supply off
90 ... 260 VAC (50/60Hz)

Additional to the relative humidity, further climatic parameters can be displayed, e.g. dew point temperature, specific enthalpy and mixing ratio.

An adjustable alarm for calibration cycle is integrated as an activ password protection..

The HygroDat 100 offers an open system architecture with standard CAN-bus connection.

The sensor and control box can be mounted independently of each other over long distances up to 100 m without influence on the measuring accuracy. Only simple installation cables (5 wires) without shield are necessary.

The transmitter HygroDat 100 gives consistently reliable and accurate data, up to 15 times per second. The HygroDat is equipped with a user-friendly calibration function. With the help of the Novasina SC humidity standards every time the system is checkable or calibratable.

Humidity measurement:
Measuring range:
6 ... 100% RH relative humidity
-40 ... +60 °C dew point
0 ... 166 kJ/kg spec. enthalpy
0 ... 49 g/kg mixing ratio
Accuracy:
(related to saturated salt solutions at 25°C)
with 5-point calibration
at 25°C ± 0.5% RH
at 0 ... 50°C ± 1% RH
without calibration : ±2% RH
Typical repeatability : < 0.3% RH
Temperature measurement:
Measuring range:
-20 ... 80°C
Accuracy : ± 0.2 K (at 0 ... 50 °C)
Typical repeatability : < 0.1 K
Electrical data:
Power supply:
16 ... 30 VAC/15 ... 40 VDC
90 ... 260 VAC
Output signal:
adjust- and calibratable:
0 ... 10 V or 2 ... 10 V or
0 ... 20 mA or 4 ... 20 mA
Digital interface:
Fieldbus: CAN 20 k ... 500 kBaud
Protokoll: CANopen
Operating temperature:
Transmitter: 0 ... 50 °C
Sensor-armatur: -20 ... 80 °C

HygroDat 100 Alu

The Novasina HygroDat humidity and temperature transmitters were specially developed to control industrial processes with high demands on measuring accuracy.

The HygroDat 100 is available in aluminium- or polycarbonate case as well as in 2 different power supply versions:

HygroDat Alu 100/24V
for power supply off 16 ... 30 VAC or 15 ... 40 VDC

HygroDat Alu 100/230V
for power supply off
90 ... 260 VAC (50/60Hz)

The IP protections standard iis IP 65.

Additional to the relative humidity, further climatic parameters can be displayed, e.g. dew point temperature, specific enthalpy and mixing ratio.

An adjustable alarm for calibration cycle is integrated as an activ password protection..

The HygroDat 100 offers an open system architecture with standard CAN-bus connection.

The sensor and control box can be mounted independently of each other over long distances up to 100 m without influence on the measuring accuracy. Only simple installation cables (5 wires) without shield are necessary.

The transmitter HygroDat 100 gives consistently reliable and accurate data, up to 15 times per second. The HygroDat is equipped with a user-friendly calibration function. With the help of the Novasina SC humidity standards every time the system is checkable or calibratable.

Humidity measurement:
Measuring range:
6 ... 100% RH relative humidity
-40 ... +60 °C dew point
0 ... 166 kJ/kg spec. enthalpy
0 ... 49 g/kg mixing ratio
Accuracy:
(related to saturated salt solutions at 25°C)
with 5-point calibration
at 25°C ± 0.5% RH
at 0 ... 50°C ± 1% RH
without calibration : ±2% RH
Typical repeatability : < 0.3% RH
Temperature measurement:
Measuring range:
-20 ... 80°C
Accuracy : ± 0.2 K (at 0 ... 50 °C)
Typical repeatability : < 0.1 K
Electrical data:
Power supply:
16 ... 30 VAC/15 ... 40 VDC
90 ... 260 VAC
Output signal:
adjust- and calibratable:
0 ... 10 V or 2 ... 10 V or
0 ... 20 mA or 4 ... 20 mA
Digital interface:
Fieldbus: CAN 20 k ... 500 kBaud
Protokoll: CANopen
Operating temperature:
Transmitter: 0 ... 50 °C
Sensor-armatur: -20 ... 80 °C

HIA electronic -
Sensor System
to transmitter HygroDat 100

High precision temperature and humidity sensor for demanding applications in industrial environments.
The HIA sensor can be only used for the HygroDat 100 system.

A high performance analogue-amplifying-electronic is integrated in the sensor shaft, which converts accurately the sensor signal into a standard analogue signal. Thanks to this modular design the sensor can be installed up to 100 meters away from the transmitter, avoiding the use of a special cable and the effect of the cable length on the system accuracy. An ordinary 5-pole electro- cable between sensor and transmitter is sufficient for a correct and accurate transmission of the sensitive signals.

The robust polycarbonate sensor housing offers an optimal protection for the electronic parts and the sensor cell. Furthermore different filter systems for and additional sensor cell protection from chemical and mechanical influences are available.

Humidity measurement:
6 ... 100% RH ..... relative humidity

Accuracy :
(based to Novasina SC checkes at 25°C)
with 5-point-calibration
± 0.5% RH........ ( at25°C)
± 1% RH .......... (range 0 ... 50°C)
±2% RH ............(without calibration)
Typical Reproducability:
< 0.3% RH........( 6....97%)
Temperaturemeasurement:
-20 ... 80°C
Sensor- measurement range
Accuracy :
± 0.2 K .............. (at 0 ... 50 °C)
< 0.1 K .............typ.reproducability
Output signal:
special Novasina based voltage signal for humidity and temperature, temperature compensanted
Operating temperature:
Transmitter itself : 0 ... 60°C
Sensor-armatur: -20 ... 80 °C

T-Data :
Fly-HIA-sensor-english.pdf
Fly-HIA-Sensor-German.pdf


Protections systems :
T-Data :
Fly-FilterGen-DFE.pdf

Catalogue / Spareparts :
Cat-Air-Filter-english.pdf
Kat-Air-Filter-German.pdf

HIS electronic - Sensor
system to HygroDat 100

High precision temperature and humidity sensor for demanding applications in industrial environments.
The HIS sensor can be only used for the HygroDat 100 system.

A high performance analogue-amplifying-electronic is integrated in the sensor shaft, which converts accurately the sensor signal into a standard analogue signal. Thanks to this modular design the sensor can be installed up to 100 meters away from the transmitter, avoiding the use of a special cable and the effect of the cable length on the system accuracy. An ordinary 5-pole electro cable between sensor and transmitter is sufficient for a correct and accurate transmission of the sensitive signals.

The robust sensor housing in stainless steel offers an optimal sensor protection in heavy-duty industrial surroundings as well as in pharma-ceutical clean room applications. Furthermore different filter systems for and additional sensor cell protection from chemical and mechanical influences are available.

Humidity measurement:
6 ... 100% RH ..... relative humidity

Accuracy :
(based to Novasina SC checkes at 25°C)
with 5-point-calibration
± 0.5% RH........ ( at25°C)
± 1% RH .......... (range 0 ... 50°C)
±2% RH ............(without calibration)
Typical Reproducability:
< 0.3% RH........( 6....97%)
Temperaturemeasurement:
-20 ... 80°C
Sensor- measurement range
Accuracy:
± 0.2 K .............. (at 0 ... 50 °C)
< 0.1 K .............typ.reproducability
Output signal:
special Novasina based voltage signal for humidity and temperature, temperature compensanted
Operating temperature:
Transmitter itself : 0 ... 60°C
Sensor-armatur: -20 ... 80 °C

T-Datas :
Fly-HIS-sensor-english.pdf
Fly-HIS-Sensor-German.pdf


Protections systems :
T-Data :
Fly-FilterGen-DFE.pdf

Catalogue / Spareparts :
Cat-Air-Filter-english.pdf
Kat-Air-Filter-German.pdf

Hygrodat 05

The Novasina Hygrodat humidity and temperature transmitters were specially developed to control critical processes with high demands on measuring accuracy.

The Hygrodat 05 is special designed for installations in control panels. It is a self contained device with a metal housing, therefore meeting the electromagnetic compatibility (EMC) standards. The sensor and control box can be mounted independently of each other and can be connected without amplifier over long distances (up to 60 m).

The Novasina precision-transmitter Hygrodat 05 gives consistently reliable and accurate data. A calibration check is possible to verify the accuracy. The Hygrodat features a user-friendly calibration function, with the press of a button the electronically-controlled adjustment is performed. Up to 5 points can be calibrated and LEDs lead the user through the process.

This since years proven sensor has been developed for the climate measurement instruments of the types HygroDat 05 / 10 / 20. It can be mounted up to 60m from the transmitter using a shielded cable. As plug a mini "Binder" connector with a maximum diameter of 13mm is being used. For the first time that way a direct installation in installation tubes has been made possible. The compact and robust polycarbonate armature of the sensor, contributes, thanks to its characteristics, to a quick response time of the sensor.

In a set, one wall mounting kit as well as a duct mounting flange, which can be employed for a sensor fixation on thin wall ducts, are delivered.

If the ordered cable length is not sufficient, it can be extended by a extension cable without any problems.

Furthermore this sensor has been equipped with the newest and quick electrolytic CC-1 humidity measurement cell. This cell can be easily plugged and exchanged if necessary. Even without any special calibration this systems allows a basic accuracy of +/- 2% rH!

Different practical accessories as protection filter systems, mounting accessories and weather protection shields complete the HS - sensor in a ideal way.

Humidity measurement:
6... 100% RH air humidity
Accuracy :
Basic Accuracy : ± 2.0% rF

Temperature measurement:
-20 ... +80°C
Accuracy :
± 0.3°C (at 0 ... 60 °C)

Opterating temperature:
Sensor-Armatur: -20 ... +80 °C

Electrical data:
Resistance "NTC"
temperature measurement
Resistance measurement also for the relative air humidity
Measurement element CC-1 cell

Brochures :
Pro-Hygrodat_10-20-DFE.pdf

T-datas :
Fly-HS-Sensor-German.pdf

Catalogue / Spare parts :
Cat-HygroDat-HS-english.pdf
Kat-HygroDat-HS-German.pdf

The Novasina Hygrodat humidity and temperature transmitters were specially developed to control critical processes with high demands on measuring accuracy.

The Hygrodat 10 is the basic model without LC display and in 3 versions available:

Hygrodat 10 M
for remote monitoring

Hygrodat 10 R
for duct-mounting

Hygrodat 10 S
for direct room supervision

The sensor and control box can be mounted independently of each other (only M-Type) and can be connected without amplifier over long distances (up to 60 m).

The Novasina precision transmitter Hygrodat 10 gives consistently reliable and accurate data. A calibration check is possible to verify the accuracy. The Hygrodat features a user-friendly calibration function, with the press of a button the electronically controlled adjustment is performed. Up to 5 points can be calibrated and LEDs lead the user through the process.

Humidity measurement:
Measuring range:
6 ... 100% RH
Accuracy
(related to saturated salt solutions at 25°C):
with 5-point calibration
at 25°C ± 0.5% RH
at 0 ... 50°C ± 1% RH
without calibration : ±2% RH
Repeatability : < 0.3% RH
Long-term stability
under typical conditions:
< 1% / year
Temperature Measurement:
Measuring range:
-20 ... 80°C
Accuracy : ± 0.5 K
Repeatability : < 0.1 K
Electrical Data:
Power supply:
9 ... 35 VDC
Output signal:
adjustable:
0 ... 1 V or 0 ... 10V or
0 ... 20mA or 4 ... 20 mA

The Novasina Hygrodat humidity and temperature transmitters were specially developed to control critical processes with high demands on measuring accuracy.

The Hygrodat 20 is the model with a LC display and in 3 vesions available:

Hygrodat 20 M
for remote monitoring

Hygrodat 20 R
or duct-mounting

Hygrodat 20 S
for direct room supervision

The sensor and control box can be mounted independently of each other (only M-Type) and can be connected without amplifier over long distances (up to 60 m).

The Novasina precision-transmitter Hygrodat 20 gives consistently reliable and accurate data. A calibration check is possible to verify the accuracy. The Hygrodat features a user-friendly calibration function, with the press of a button the electronically-controlled adjustment is performed. Up to 5 points can be calibrated and LEDs and LC-display lead the user through the process. The strong EMC proved design is inportant for many industrial application. The measurment cell has no electronic inside, so you can measure humidity and temperature in many radioactive environments too.

Humidity measurement:
Measuring range:
6 ... 100% RH
Accuracy (related to saturated salt solutions at 25°C):
with 5-point calibration
at 25°C ± 0.5% RH
at 0 ... 50°C ± 1% RH
without calibration : ±2% RH
Repeatability : < 0.3% RH
Long-term stability
under typical conditions:
< 1% / year
Temperature Measurement:
Measuring range:
-20 ... 80°C
Accuracy : ± 0.5 K
Repeatability : < 0.1 K
Electrical Data:
Power supply:
9 ... 35 VDC
Output signal:
adjustable:
0 ... 1 V or 0 ... 10V or
0 ... 20mA or 4 ... 20 mA

TR 200 / RS

A high-precision instrument for measuring and monitoring air parameter, relative humidity and temperature.

TR 200 230 VAC
TR 200 115 VAC
TR 200 24 VAC
TR 200 24 VDC
(without an digital interface )
or regulation and control

TR 200 RS 230 VAC
TR 200 RS 115 VAC
TR 200 RS 24 VAC
TR 200 RS 24 VDC
(with an RS 232 interface )
for data aquisation and PLC communicaton

The Novasina TR200 transmitter was designed for continuous measurement and direct monitoring of relative air humidity and temperature. The unit also calculates and displays dew point temperature, specific enthalpy and other climatic parameters otherwise found only in the Mollier diagram.

Two different sensors are available for different applications in the industrie.

• 83E Armatur
• HSM Poly Sensor

Many other technical features like an RS 232 as an option or an possilbe 5 point humidity adjusting an 2 scalable analogue outputs are inside for the highest instrument standard in industrial applications.

In many different applications the customers assurance of TR 200 worldwide since many years.

Measuring range:
6 ... 100% RH ..... relative humidity
-50 ... +80 °C .... Dewpoint
0 .... 500kJ/kg . spez.enthalpie
0 .... 544 g/kg ..... water content
0 .... 472 mBar..... Dampfdruck
Accuracy :
(related to saturated salt solutions at 25°C):
With 5-point-calibration :
± 1.0% RH........ ( at 25°C)
± 1.5% RH........ (at 0 ... 50°C)
±2% rF ............(without calibration)
Typical repeatability :
< 0.3% RH........( 6....100%)
Temperature measurement:
-20 ... 80°C ........ cell range !
Accuracy:
± 0.3 K .............. (at 0 ... 50 °C)
< 0.1 K .............typ.repeatability
Electrical datas:
Power supply:
1. 200...230 VAC ( 50 / 60Hz)
2. 100 ... 115VAC ( 50 / 60Hz)
3. 9 ... 35 VDC
4. 16 ... 24VAC
Output signal:
Customer chancable and scalable output:
0 ... 1.0 V, 0....5 V, 2 ... 10 V or
0 ... 20 mA or 4 ... 20 mA
Digital interface:
Serielle PC based RS-232 interface
Protocoll : PC, Epson, Seiko for direct printer connection.
Operation temperature :
Transmitter: -10 ... 50 °C
Sensor itself: -20 ... 80 °C
Calibration:
5 points between
11% and 90% RH with SC checks
from Novasina

HSM - sensor system
for the proven CK-4 and CK-5 humidity measurement cell

This sensor is a further development of the since years proven ESM sensor for the high precision multifunctional TR 200 measurement system from Novasina.

Even though the same measurement cells CK-4 and CK-5 are used, the armature diameter could be reduced from 20mm to 13mm as well as the whole mass of the sensor. This allows a remarkable shorter response time on humidity and temperature changes.

The sensor can be used in electro-magnetic fields or even in a radio-active environment as it works absolutely passive and no electronics are integrated. Nevertheless cable length up to 60m between sensor and transmitter are possible. Special cable lengths or extension cables are deliverable on demand.

The employed filter protection cap is made of aluminium. Special filter protection sheets made of metal web, active carbon, silver-oxyde or cellgard can be used in different combinations and replaced.

The HSM sensor puts together robustness, lightness and short response time in an ideal way.

Humidity measurement:
6... 100% RH air humidity
Accuracy :
Basic accuracy : ± 2.0% rF
Temperature measurment :
-20 ... +80°C
Accuracy : ± 0.3°C (at 0 ... 60 °C)
Operating temperature :
Sensor-Armatur: -20 ... +80 °C
Electrical datas:
Resistance "NTC"
temperature measurement
Resistance measurement also for the relative air humidity

T-data :
Fly-HSM-Sensor-DFE.pdf
Fly-TR200-HSM-DFE.pdf

Catalogue / Spareparts:
Cat-TR200-english.pdf
Kat-TR200-German.pdf

TR 102 R /S

Stationary 2-wire system for the measurement of relative air humidity in HVAC applications. Interchangable humidity measurement element. Robustness sensor. 1 point adjusting with Novasina SC check's.

The sensor itself, generate an active 4...20mA signal correspond of 0...100% air humidity direct on the same line of power supply!

The transmitters Novasina TR102 provide continuous monitoring of the relative air humidity in rooms and ducts.

Measuring range:
6 ... 95% RH or
6 ... 96% RH (CK-3 measurment cell)
Power supply:
15 ... 30V DC
Output signal: ( active signal on the Power line ) : 4 ... 20mA
Calibration:
1 point at 53%, 75% or 90% RH