+GF+
SIGNET 8900
Multi-Parameter
Controller
Product Description: The +GF+ SIGNET 8900
Multi-Parameter Controller takes the concept of modularity to the
extreme. Each 8900 is field commissioned with the users specified
combination of inputs, outputs, and relays using simple-to-install
modular boards into the base unit. To assemble a controller, there
is a choice of two base units offered with a choice of back-lit
LCD or vacuum fluorescent display. Then, continue building with a
selection of plug-in modules for either two, four, or six input
channels which accepts any of the +GF+ SIGNET sensors listed
below, and/or other manufacturer’s sensors via a 4 to 20mA
signal converter (+GF+ SIGNET Model 8058). To complete your unit,
choose a power module with universal AC line voltage or 12 to 24
VDC.
If more features are needed, analog output and relay modules are
available and easily installed. Plus, the 8900 will support up to
four additional relays via an external relay module.
There are other notable features that the 8900 offers. For
instance, digital input to the 8900 enables longer cable runs and
simplified wiring with minimal noise interference. Advanced relay
logic provides operators an "and/or" logic to produce
hi/low alarms. Derived measurements include difference, sum,
ratio, percent recovery, percent rejection, and percent passage
(BTU pending). The menu system can be programmed to display in
multi-languages including English, German, French, Spanish,
Italian, and Portuguese.
> Applications
> FAQ's |
 |
|
 |
Features:
- Measures Flow, pH, ORP, Conductivity,
Pressure, Level and Temperature
- Multi-language display
- 1/4 DIN enclosure
- Up to 4 analog outputs
- Up to 8 relays
- 12 to 24 VDC or 85 to 264 VAC Power
- Digital Communication for improved
noise tolerance, extended cable lengths, and easy wiring
- Accepts 4 to 20mA output devices when
used with 8058 signal converter
|
8900
Illustration:
1
CAD
Drawings: 8900
- Plug-in
terminals
- Multi-language
display (pending)
|
|
|
