| Air
temperature and air velocity |
TS
200 / 220 / 240 SDI –climate sensors
For
measuring air temperature and humidity. Relative
humidity (r. h.), absolute humidity (g/m3), air
temperature (°C, °F) and dew point temperature (dp
°C, dp °F) are determined.
Temperature
and humidity measured values are shown simultaneously in
real time on the display of the T2000.
Minimum,
maximum, average and “hold” values can be displayed
optionally in addition to the measured value.
|
#TS200
$31000 FOB CA
#T9016 $3800 FOB CA
|
#TS220
$77500 FOB CA
|
Since
there is frequently a heavy accumulation of dust and dirt
under practical conditions which can lead to falsification of
the measuring results and shortening of the sensor life, the
TS 200 SDI
is
already equipped with a metal grid filter as a standard
(measurement range -20 to 70 °C; 0 to 98 % r. h.)
A high grade steel sinter filter (T9016)
is
optionally available for environments with heavy soiling. |
The
250 mm long stainless steel TS 220 SDI sensor fitted with
aTeflon filter enables high temperature measurements, e.g. of
drying processes up to 140 °C, and up to180 °C in the
short-term (measurementrange -40 to 140 /180 °C; 0 to100 %
r.h.).
#TS240
$73000 FOB CA |
|
|
The
TS 240 SDI climate sensor is 250 mm long with a diameter of
just 4 mm. It is therefore ideal for temperature and
moisture measurements in confined places and for hygrometric
comparative measurement in drilled holes > 4 mm
(measurement range - 40 to 100 °C; 0 to 100 % r. h.).
|
| Moisture
Measurement |
Alarm
function
Additionally an individual alarm limit can be defined with
both moisture sensors.
Advantage of the alarm function:
Large areas can also be measured quickly and effectively. The
user can concentrate on the target without having to watch the
measuring results on the display the whole time.
As soon as the selected limit is exceeded, the sensor
alerts the user with an acoustic signal! |
Surface
moisture
TS
300 SDI-capacitive moisture sensor
The area of application of the TS 300 SDI is in the non-destructive
determination of moisture distributions in areas up to 4 cm
away from the surface (measurement range 0…200 digit).
The TS 300 SDI can display average, minimum, maximum and
“hold” values.
#TS300
$33000 FOB CA |
Sub-surface
moisture
TS
350 SDI-microwave moisture sensor
With its microwave technology, the TS 350 SDI is suitable for
nondestructive moisture measurement up to a material depth
of
30 cm (measurement range 0…200 digit).
Another advantage is the independence from the degree of
salination of the material. It
therefore makes no difference to the microwave
technique whether an older or a new
building (hygroscopicsigns of moisture) is
measured.
#TS350
$1,03000 FOB CA |
| Velocity
Measurement |
Airflow
speed
|
TS
400 /420 / 460 SDI – Anemometer Sensors
With these sensors it is possible to measure airflow speed
and temperature simultaneously. Minimum, maximum,
average and
“hold” values can be displayed optionally in addition
to the measured value. |
#TS400
$43000 FOB CA
The
anemometer sensor TS 400 SDI (measurement range 0 to 50 °C; 0
to 20 m/s, accuracy
approx. ±0.2 m/s) is not only suitable for checking the
distribution of flow and temperature in air conditioning and
climate control systems but also
for pinpointing weakness when demonstrating the air density of
buildings (Blower Door). Reconstruction companies also use it
to check the capacity
of their drying installations in insulation
layer
drying because this sensor allows them to
determine
quickly and exactly whether there is sufficient
flow of air at the relief openings to dry out the insulation
layer! |
#TS420
(call for pricing)
For
measurement jobs requiring particularly precise
results, particularly with small flow values up to 2 m/s, the
TS 420 SDI anemometer sensor can offer a degree of accuracy of
0.04 m/s (measurement
range 0 to 50 °C; 0 to 2 m/s).
|
#TS460
$35000 FOB CA
As
a cost-effective standard anemometer sensor
the
TS 460 SDI
is
also available. Almost precise as the TS 400 SDI, but fitted
with a polycarbonate tip (ø 12 mm) rather than one of
stainless steel.
|
