532840-1

Megger DLRO10HD Low Resistance Ohmmeter & KC1-TL3-C Kelvin Lead Set

MANUFACTURER: Megger
MODEL: DLRO10HD

  • Includes one Megger DLRO10HD Digital Low Resistance Meter and one Megger KC1-TL3-C Kelvin Clip Lead Set
  • Megger DLRO10HD Low Resistance Meter can perform low contact resistance tests (ducter tests) on all metallic joints
  • Megger DLRO10HD features new interchangeable test lead terminations and a large, backlit, digital, LCD Display

$4015.00

Megger DLRO10HD Digital Low Resistance Ohmmeter

FEATURES

  • High or low output power selection for condition diagnosis
  • Rechargeable battery or line power supply, continuous operation, even with dead battery
  • 10 A for 60 seconds, less time waiting to cool, great for charging inductance
  • High input protection to 600 V, inadvertent connection to line or UPS voltage will not blow a fuse
  • Heavy duty case: IP 65 lid closed, IP54 operational (battery operation only)
  • Rotary switch selects one of five test modes, including auto start on connection, giving ease of use

OVERVIEW

The Megger DLRO10HD Digital Low Resistance Ohmmeter is a rugged instrument capable of performing low contact resistance tests (ducter tests) on all metallic joints, including those present in railways and aircraft.

The Megger DLRO10HD Digital Low Resistance Ohmmeter puts resilience and durability at the forefront of its design and so has been optimised to withstand 600V, and/or accidental contact with line or UPS voltage, without blowing a fuse. It also features a Test Lead Live voltage warning light and is supplied with a hard carrying case which can protect the Megger DLRO10HD Digital Low Resistance Ohmmeter from the elements and falls of up to 1m.

Kelvin-clip-lead-set

Megger KC1-TL3-C Kelvin Clip Lead Set Description

  • The Megger KC1-TL3-C Kelvin Clip Lead Set is compatible with the above Megger DLRO10HD Low Resistance Ohmmeter.
  • This Kelvin Clip Lead Set has a lead set loop resistance of 88mΩ. It includes two KC1-C Kelvin Clips; one TL3-C 3m Connect Lead and a TL3-CL 3m Connect Lead with Indicator Lights.

Megger KC1-TL3-C Kelvin Clip Lead Set Key Features

  • Compatible with Megger’s DLRO10HD Low Resistance Ohmmeter
  • Total lead set loop resistance of 88mΩ
  • 2x KC1-C Kelvin Clips
  • 1x TL3-C 3m Connect Lead
  • 1x TL3-CL 3m Connect Lead with Indicator Lights

SPECIFICATIONS

  • Temperature Coefficient : < 0.01% per ºC, from 5 ºC to 40 ºC
  • Maximum Altitude: 2000 m (6562 ft) to full safety specifications
  • Display Size/Type: Main 5 digit + 2 x 5 digit secondary displays
  • Battery Type: 6 V, 7Ah sealed lead acid
  • Voltage Input Range: 100 – 240 V 50 / 60 Hz 90 VA
  • Charge Time : 8 hours
  • Backlight: LED backlight
  • Battery Life: >1000 Auto (3 sec) tests
  • Auto Power Down: 300s
  • Mode Selection: Rotary switch
  • Range Selection: Rotary switch
  • Weight : 6.7 kg
  • Case Dimensions : L315 mm x W285 mm x H181 mm
  • Pouch for Test Leads : Yes (lid mounted)
  • Test Leads: NOT SUPPLIED
  • IP Rating :IP65 case closed, IP54 battery operation
  • Safety Rating: In accordance with IEC61010-1, CATIII 300V when used with optional terminal cover (details in ordering information)
  • Operating Temperature and Humidity: -10 °C to +50 °C (14 °F to 122 °F) <90% RH
  • Reference Conditions : 20 °C ±3 °C
  • Storage Temperature and Humidity : -25 °C to +60 °C, <90% RH
  • EMC: In accordance with IEC61326-1 (Heavy industrial)
  • Noise Rejection: Less than 1% ±20 digits additional error with 100 mV peak 50/60 Hz. on the potential leads. Warning will show if hum or noise exceeds this level.
  • Maximum Lead Resistance : 100 mΩ total for 10 A operation irrespective of battery condition

REVIEWS